REDRAGON H310 MUSES Wired Gaming Headset User Manual
Dear user
Thank you for choosing the REDRAGON brand. To protect your rights and for better customer service, we ask you to note our warranty rules.
- Within 18 months from the purchase date, repair is guaranteed for failure due to electrical circuit problems. Man-made damages, such as disassembly, hard impacts, submersion into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
- Consumable parts (such as footsticks) and spare parts replacement are not included in our warranty.
- Please fill out the warranty card. The warranty card is valid with the stamp of the retailer.
- This warranty card will not be reissued if lost. Please keep it in a safe place.
Product introduce
Welcome to purchase the 7.1 channel surround stereo PC gaming headset, the product works with PC, PS3, and PS4, it is connected to PC through a USB port for E-sport games, music, online chatting, and video conferences.
Special function
When the headphone is placed horizontally, it will be in auto silent mode; When you wear it, the auto silent mode will be off, which will save power and prolong the lifetime of the speaker; In the meantime, the speaker can be turned on/off without pressing the button manually, which is very convenient. Instructions for functions of orientation sensor automatic scheduled power on/off:
- The front, back, left and right side of the headphone has an orientation sensor, and when it is placed horizontally, it will be in silent mode and close the LED light automatically. When you are wearing the headphones, it will close the auto silent mode and turn the LED light on.
- The orientation sensor of headphones has the function of calibration level reset when it is placed horizontally (the horizontal direction of three buttons), long press the middle button (or the microphone switch) for about 8 seconds, and the sensor will reset/restart instantly. If the LED light flashes for 1 second and then goes out, it means the calibration goes on successfully. If the light flashes 3 times quickly, the calibration fails. It means you need to long press the button for calibration after releasing it. Notes: The headphone has been calibrated before delivery, normally, there’s no need to use a one-key reset.
Gaming headset instruction
- Stretch adjustment of the headband
- Earcap
- Mainline
- Volume down
- MIC switch [one-key reset]
- Volume plus
- LED light
- Microphone indicator light
- Headphone bow
Specification
- Plug Type: USB
- Speaker diameter: 50MM
- Sensitivity: 12013dB S.P.L. at 1KHz
- Frequency Response: 50-20000 Hz
- Rated Power: 20 mW
- PowerCapability : 30 mW
- Impedance: 320‡15%
- Mic Dimensions: Ф6 x 2.7mm
- Sensitivity: -38+2dB (0dB =1V/PA)|
- Directivity: Omni-directional|
- Impedance: ≤ 2.2K 0(Max)|
- Rated voltage: 5V
- Rated input current: 100~450 mA
- Cord Length: ≥2.2M|
Operating guide
- Insert headset USB cable to PC USB port, it is plug and play
- The headset backlight will be on after connecting to the PC
- In-line control of Volume and microphone-mute
- With mute indicator in RED LED
- The LED turns RED and twinkles indicating play music mode
Remark
- Do not put the headset in a humid and wet place.
- High volume for a long period may damage your hearing.
- Do not put your strength into pulling the cable.
