Asus ROG Harrier GT300 Gaming Mouse User Manual
Package contents
Replacing the switches
Setting up the wireless receiver/charging dock
Device Features
- Right button
- Scroll wheel
- DPI button
- USB Type-C® connector
- Left button
- Forward button
- Backward button
- Programmable thumb buttons
- Rubber cover
- Optical sensor
- Mouse charging connectors
- Power switch
- Pairing button
- Wireless receiver/charging dock
- Dock charging connectors
- Pairing button (Dock)
- USB Type-C® to Type-A cable
- Dock LED indicator
Connecting your Gaming mouse
Setting up your gaming mouse as a wired mouse
Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and a USB port on your computer
Setting up your gaming mouse as an RF wireless mouse
NOTE: Download the driver from https://www.asus.com and install it on your computer.
- Connect the bundled USB Type-C® to Type-A cable to your wireless receiver/charging dock and a USB port on your computer. NOTE: Your gaming mouse comes paired by default. Please follow steps 2 – 5 only if you need to pair your gaming mouse again.
- Press the Pairing button for 3 seconds on the rear of your wireless receiver/charging dock, and the Dock LED indicator should begin blinking green.
- Slide the Power Switch to turn on your ROG SPATHA X gaming mouse.
- Press the Pairing button for 3 seconds on your ROG SPATHA X gaming mouse, the LEDs should begin blinking green.
- The Dock LED indicator and gaming mouse LEDs will return to their original lighting effects when your ROG SPATHA X gaming mouse has successfully paired.
NOTE: Click on the left button to wake your ROG SPATHA X gaming mouse from sleep mode.
Battery Status
The LEDs on your gaming mouse will turn red (breathing) when the battery power is below 20% in RF 2.4G mode. You may charge your gaming mouse by using the bundled USB cable or wireless receiver/charging dock.
Using the DPI On-The-Scroll tuning function
The DPI On-The-Scroll tuning function allows you to customize the DPI of your gaming mouse without using Armoury Crate.
- Press and hold the DPI button for 3 seconds until the LEDs on your gaming mouse light up.
- Scroll the scroll wheel forwards or backward to adjust the DPI. The LED color hue on your scroll wheel will differ depending on the DPI adjustment.
NOTE:- The DPI increments at 50 DPI per scroll forwards and decrements at 50 DPI per scroll backward.
- The DPI ranges from 100 DPI (blue) to 19000 DPI (red).
- Press the DPI button once you have finished customizing the DPI value to save the changes made.
Updating the gaming mouse and wireless receiver/charging dock
- Connect your gaming mouse or wireless receiver/charging dock to your computer using the bundled cable.
- Download and install the Armoury Crate software from https://rog.asus.com/Mice-Mouse-Pads/Mice/Ergonomic-Right-Handed/ROG-Spath-X-model/helpdesk/.
- Follow the software instructions to update your gaming mouse’s firmware.
- Customize your gaming mouse using Armoury Crate.
REFERENCE LINK
https://www.asus.com/us/supportonly/gt300/helpdesk/