TREBLAB HD-Max Big Loud Bluetooth Speaker User Guide
SAFETY RULES
- Don’t disassemble or modify your speaker for any reason. Doing this may cause the speaker to malfunction or become combustible. The damage to your device can void the manufacturer’s warranty.
- Do not let your device get wet – liquids can cause serious damage. Water damage to your device can void the manufacturer’s warranty.
- Avoid exposing TREBLAB HD Max to extreme temperatures (below 37° F / 3°C or above 112° F / 45°C). Extreme temperatures can cause the deformation of the HD Max components and reduce the battery life and the lifespan of your new speaker.
- Don’t put the device’s LED lights close to humans’ or animals’ eyes.
- Do not use HD Max during a thunderstorm. Thunderstorms can cause serious
WHAT’S IN THE BOX
- TREBLAB HD Max speaker
- Carrying strap
- User’s manual
- Type-C charging cable
- Round TREBLAB logo sticker
- Insert card
- 3.5 mm audio cable
BUTTONS AND PARTS
SPEAKER FUNCTION
SETTING UP YOUR HD Max
Turn ON
Press and hold the POWER button for 3 seconds. You will hear the sound cue, the battery level indicators will light up and the BLUE LED light will start flashing.
Turn OFF
Press and hold the POWER button for 3 seconds. You will hear the sound cue, and the RED LED will light up and go OFF. The battery level indicators will be ON for another 10 seconds and will go OFF as well.
WIRELESS PAIRING
Make sure TREBLAB HD Max is fully charged and that the 3.5 mm audio cable is not plugged in.
- Turn ON your speaker by pressing and holding the POWER button for 3 seconds. You will hear the sound cue, the battery level indicators will light up and the LED will start flashing BLUE, meaning that the speaker is in pairing mode.
- Activate the Bluetooth mode on your device (smartphone, tablet, laptop).
- Select TREBLAB HD Max from the Bluetooth devices list. Keep it within 3 feet/1 meter of the speaker while pairing.
- If necessary, enter passcode 0000.
- Once HD Max is successfully paired and connected, the LED will stop flashing and stay BLUE.
REPAIRING
After the initial pairing, the speaker will automatically connect to the previously paired device when turned ON again. If reconnection does not happen automatically, the speaker will start looking for any other previously paired device within the effective distance range. TREBLAB HD Max can remember up to 8 recently paired devices.
TRUE WIRELESS STEREO (TWS)- PAIRING TWO SPEAKERS
The TWS technology allows you to use two speakers paired wirelessly to create a wireless dual-channel system, delivering a true stereo sound effect.
- Select the Master speaker and pair it to the smart device following the steps from the WIRELESS PAIRING section. Then turn this speaker OFF.
- Turn OFF the Bluetooth on the smart device.
- Place the Master and Slave speakers near each other (the distance should not be over 3 feet /1 meter).
- Turn ON both speakers. You will hear the sound prompt, and the LED indicator will flash BLUE.
- Double click the POWER button on the Master speaker. The LED indicator will start flashing BLUE and GREEN, indicating pairing with the Slave speaker.
- Turn ON the Bluetooth on the Wireless device.
AUDIO PLAYBACK
- To pause and resume playback when connected wirelessly, press the PLAY button.
- To adjust the volume, press the VOLUME + or the VOLUME – button while listening to music.
- To change the track on the HD Max, press and hold the VOLUME + or the VOLUME – button for 2 seconds.
SOUND MODES
TREBLAB HD Max speaker supports three audio modes: Outdoor, Indoor and Bass Boost. In the Outdoor mode, treble is enhanced which ensures higher volume at open spaces. Indoor mode will be suitable for indoor application. In the Bass Boost mode, low frequencies are enhanced for better listening experience. To switch between the modes, double-press the PLAY/ PAUSE button when the speaker is ON. To change the sound profiles in TWS mode double-press the PLAY/ PAUSE button on any speaker. The changes will apply for both speakers.
PHONE CALLS
TREBLAB HD Max can be used to make and receive phone calls when connected wirelessly. Audio playback will be paused during calls.
| To answer/ end a call: | Press the PLAY/ PAUSE button. | ||
| To reject a call. | Press and hold the PLAY/ PAUSE2 seconds. | button | for |
| To redial: | Press and hold the PLAY/ PAUSE2 seconds. | button | for |
CHARGING
One full battery charge provides up to 5 hours of playing time at maximum volume, and up to 20 hours at 30% volume. When the battery is running low, you will hear a sound signal. To charge the speaker, plug one end of the supplied cable into the TYPE-C charging port under the rubber cover at the side of the speaker. Plug the other end of the charging cable into a standard USB port. It takes up to 5.5 hours to fully charge. If the speaker is turned OFF, the LED light will turn on RED. If the speaker is turned ON and connected to the device, the PURPLE LED will light up.
BATTERY LEVEL INDICATION
The HD Max speaker is equipped with the battery level indicators – LEDs. The current charge level is displayed while charging, when the speaker is used as a power bank and after the POWER button is pressed in OFF state.
- Charge level is between 0% and 30%: one LED is ON (flashing during the speaker charging or in the power bank mode).
- Charge level is between 30% and 70%: two LEDs are ON (flashing during the speaker charging or in the power bank mode).
- Charge level is between 70% and 100%: three LEDs are ON
POWER BANK MODE
- Connect your device to the speaker by plugging your device’s charging cable into the USB 2.0 output port under the rubber cover at the side of the speaker.
- If the speaker is in OFF state, press the POWER button to start charging. In case the speaker is ON, it will start charging instantly after you connect the device to the USB 2.0 output port.
- Please pay attention to your device’s battery charge indicator during the charging time.
TROUBLESHOOTING
SPECIFICATIONS
- Battery: Up to 20 hours playtime (30% volume) Up to 5 hours (100% volume), 12000mAh 3.7V, rechargeable
- Charging time: 12000mAh 3.7V, rechargeable Li-Ion
- Bluetooth version: 5.5 hours
- Supported profiles: 4.2
- Frequency response: HFP, A2DP, AVRCP, GAVDP, AVDTP, SPP, AVCTP 80 Hz-16 kHz
- Signal range: 33 ft/10 m
- Speaker size: 2 x 31 mm , 2 x 70 mm
- Output power: 50W
- Water resistance: IPX6
- Charging port: TYPE-C
- Audio port: 3.5 mm jack
- Dimensions: 4.72 x 4.72 x 12.4 inches/120 x 120 x 315 mm
- Weight: 5.62 lbs/2550 g
