Table of contents
show
HDSPCAM Mini Hidden Camera User Manual
Download Install “HDSPCAM“ APP
- Method 1: Search and download“HDSPCAM” in the Google App market (for Android) /App Store(for iPhone), and install it on your phone.
- Method 2: Scan below QR code below and download the “HDSPCAM“App
Operation Instruction
- Power On
- Step 1: Press “ON/OFF” constantly for 2 seconds.
- Step 2: The yellow and blue light up together.
- Step 3: The yellow and blue flash together
- Step 4: The blue lights up or flashes
- Step 5: AP Hotpot is available
Note: After all of the above are finished, please check whether the TF card is inserted. The blue will light up if not, and the blue will flash slowly and start
- Power off: Press “ON/OFF” constantly for 3 seconds.
- Forced shutdown: If the device is stuck or unable to shut down and restore the factory settings, please press both buttons to shut down the power.
- Restore factory settings: Press “RESET” constantly for 3 seconds. (The password will be reset to the original factory settings and the device status will be switched to AP mode when remote.)
Lights instruction:
The yellow and blue light up: Startup The yellow and blue flash: Network is connecting The blue light flashes: AP mode, and start record The blue lights up: AP mode, and non-work The yellow flash: Network mode, and start record The yellow lights up: Network mode, and non-work The red lights up: Being charged
Add Device
- After the device starts, please find the hotspot and connect (HDSPCAM_XXXXXX) in the WLAN setting.
- Open APP ‘HDSPCAM’, click”+”, add new unconnected router device
- Input initial password: a12345678 (letters are lowercase)
- Click √ to finish adding a router
- Automatically note whether the router is connected or not.
WIFI Mode
If you click“YES”, means the system enters a remote network configuration
- Step 1: Choose one Wi-Fi network and input the corresponding password.
- Step 2: Click connection and the system restarts automatically. (About 30 seconds)
- Step 3: The blue on the device lights up when the device is online, supporting the remote view phone app.
AP Mode
If you click“NOT”, means the system enters AP mode, and the phone will be connected to the device’s AP hotspot. In this situation, the AP mode supports viewing live video on the phone app under no network. ( Please keep the effective distance of viewinginAPmode within 30 meters.)
- Step 1: Open the APP, click”+”, Choose one Wi-Fi network, and input the corresponding password.
- Step 2: You can watch the monitoring screen remotely After the.
Button introduction
Frequent Q&A
- Q: Press “ON/OFF” constantly, the red and blue don’t light up.
A: Low power, The device needs to be charged. - Q: Why do the red and blue light up constantly and the device is dead after device start-up?
A: Press both buttons(ON and OFF) and restart the device. - Q: Forget password, what I should do?
A: Press “ RESET ” for 3 seconds constantly and the device will go to factory settings. The device factory password