Cocoon HE160232 8 Camera Home Security System Instruction Manual

Table of contents show

Cocoon-HE160232- 8-Camera-Home-Security-System-Image-1

Before installing the Home Security System, it is essential to plan where to locate the DVR unit. Below are a few points to consider:
The DVR unit should be positioned in a central location with easy access to mains power,cameras and installed cables
If you plan to use remote viewing features, the DVR unit should be located near your modem /router or Ethernet network point
The DVR unit should be installed in a secure location to avoid tampering
Do not place heavy objects on top of the DVR unit
Do not block ventilation holes on the top and sides of the DVR unit or use in an enclosed area as this may cause overheating
Plan out where you would like to place your cameras and test all connections BEFORE permanently installing cables and cameras.
Cameras should be placed covertly indoors where you do not want to see them every day
Outdoor Cocoon HE160232 8 Camera Home Security System can be placed in plain sight to act as a deterrent to would-be intruders.

Single – Switch to single view mode. Select the camera to view
Multi – Switch to split screen mode
TIP: Alternatively, use the mouse and double click with LMB on the image to switch between the two modes
Stop/Start Scan – Automatically changes the single camera view at a selected interval. See 4.4.2 Live for more details
Colour – Adjust the colour settings of the selected camera
E-Zoom – Click and drag to draw a box in the bottom left window to zoom-in on the selection, right-click to return to full screen mode