Hello Baby HB6256 2.4GHz Digital Video Baby Monitor Manual
Thank you for purchasing the HB26 Baby Monitor. With our baby monitor, you could see and hear your baby sleeping or playing in their room anytime. Please retain your original dated sales receipt for your records. For warranty service of your product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Please make sure the following included in your package
- Parent unit x 1
- Camera unit x 1
- User manual x 1
- Wall-mounting kit x 1
- Power Adapter × 2
SAFETY INSTRUCTIONS
CAUTION:
Keep the device away from children. Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (0.9m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. choking hazard: This product contains small parts, please be careful when unpacking and assembling the product. Read and keep to instructions: All the safety and operating instructions should be read before the video baby monitor is operated.
This product cannot replace responsible adult supervision. Water and moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping, or splashing. No objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water. DO NOT: Use the appliance if the cord or plug is damaged. If your baby monitor is not operating properly or has suffered any damage, contact the “Videotimes” service center to Rosset notion sed Rossie of the scale see le order to sued sou select rie.
WARRANTY TERMS
We offer a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact our after-sales service via email.
INSTALLATION GUIDELINES
- To use your parent unit and camera unit together, you have to establish a radio link between them, and the range will be affected by environmental conditions.
- Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors, or reinforced concrete between the baby and parent unit may block the radio signal.
- The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent lights, or dimmer switches.
- Use of other 2.4G Hz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1.5m) from such products, or turn them off if they cause interferences.
PLACEMENT OF THE BABY MONITOR
The camera can be placed on the desktop or mounted on the wall. Don’t place the baby monitor on soft quilts or blankets or in the corners of cupboards, shelves, etc; Keep the baby monitor away from heat sources such as radiators, chimneys, cookers, and direct sunlight; Keep the baby unit away from TV sets, microwave oven, and radios. If interference occurs, move the camera elsewhere; * Place the camera within 6 feet (2 meters) of the area being monitored for optimum performance.
PRODUCT OVERVIEW
PARENT UNIT OVERVIEW:
BABY UNIT OVERVIEW:
KEY OPERATION
TURN ON/OFF
Press and hold the power 
UP 
KEY
Press once to tilt the camera up by one step. Press and hold to tilt continuously.
DOWN 
KEY
Press once to tilt the camera down by one step. Press and hold to tilt continuously.
LEFT 
KEY
Press once to pan the camera left by one step. Press and hold to pan continuously.
RIGHT 
KEY
Press once to pan the camera right by one step. Press and hold to pan continuously.
CAMERA VIEW/SCAN
Press the scan 
key to view/scan the camera; during scan mode, the scan icon will be displayed on the top of the screen. Each camera’s video will be displayed on the LCD for around 10 seconds then change to the next camera:
DIGITAL ZOOM
Press and hold the key for around 2 seconds to operate Zoom in/ out;
Two Way Talk
Press and hold 
the key to enter two-way talk mode. A microphone icon & will be displayed in the corner of the LCD screen. Release the key to stop. Note: When you are in the two-way talk mode, the parent unit speaker is muted.
ADD CAMERA
- Press the MENU
key then the menu will pop up; - Press the
key until the camera icon 
is selected by the red box; - Press the OK6 key to enter into sub-menu, then press the
key to select your desired camera; - Press OKor key to enter into the sub-menu; Press
key to select 
+ then press OK key;
key then the menu will pop up;
key until the camera icon 
is selected by the red box;
+ then press OK key;VOX SETTING
This mode allows you to control the sound activation of your baby unit. If there is no sound around the baby unit within 30 seconds, it will stop audio transmission and turn off the screen of the parent unit. When the baby unit detects any sounds louder than the sensitivity level, it will start transmitting the signal to the parent unit again and turn on the screen of the parent unit. To change the VOX level, please follow the below instructions.
- Press the MENU6 key then the menu will pop up;
- Press the key until the VOX icon
is selected by red box. - Press OKor key enter into sub-menu, then press
key to select desired level; - Press OK(6) key to confirm;
- Press the
kevto Exit.
is selected by red box.
key to select desired level;
kevto Exit.Note:
Is Low sensitivity level, the baby has to make a lot of sounds before the VOX function will be activated; in the middle sensitivity level; is High sensitivity level, the baby doesn’t have to make a lot of sounds before the VOX function will be activated.
MAINTENANCE
- Clean your baby monitor with a slightly damp or anti-static cloth.
- Never use cleaning agents or solvents.
DISPOSAL GUIDE FOR BATTERY AND PRODUCT
- Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit;
- Remember to dispose of the product in an environmentally responsible way;
- For proper collection and processing of these products, take them to the collection points designated by local authorities. You can also contact the store where you purchased the product.
Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause personal injury or damage to property. Use only the types of batteries which are indicated in this manual.
CAUTION:
Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45 degrees C or Incinerate.
Follow the Manufacturer’s Instructions.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. -The battery shall not be exposed to excessive heat such as sunshine, fire, or the like;
FFCC& ISDE Statement
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Cet appareil est conformeà la partie 15 des règles de la FCC et aux normes RSS exemptées de licence ‘Industrie Canada. Le fonctionnement est soumis aux deuxconditions suivantes: (1)cet appareil ne doit pas causer d’interférences nuisibles, et (2)cet appareil dot accepter toute interférence reçue, y compris les interferences pouvant entraîner un fonctionnement indés. Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, user can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l’exemption des limites d’évaluation courante dans la section 2.5 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l’exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
Continued
The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. ISED RF Exposure Information and Statement The SAR limit of Canada(ISED) is 1.6 W/kg averaging over one gram of tissue. Device types: The monitor has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the Monitor kept 0mm from the body.
To maintain compliance with ISED RF exposure requirements, use accessories that maintain an 0mm separation distance between the user’s body and the back of the Monitor. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements and should be avoided.
REFERENCE LINK
https://www.hellobaby-monitor.com/
