Honeywell Focus Pro 5000 Series Thermostat User Manual

Honeywell Focus Pro 5000 Series Thermostat User Manual

Installer System Test

Focus PRO® 5000 Series

1. To begin, press and hold the ▲ and ▼ buttons until the display changes.
2. Press ▲/▼ to turn system on/off.
3. Press NEXT to advance to next test.
4. Press DONE to terminate system test.
5. Proceed to Installer System Tests on page 8.

Installer Setup

Focus PRO® 5000 Series

1. To begin, press and hold the ▲ and FAN buttons until the display changes.
2. Press ▲ or ▼to change settings
3. Press NEXT to advance to the next function.
4. Press DONE to exit and save settings.
5. Proceed to Installer Setup Functions on page 4

Key Features

Intuitive Digital Display

The large, clear digital display ensures easy readability of temperature settings, fan modes, and system status. Users can quickly check current settings at a glance, making adjustments effortless.

Versatile System Compatibility

Compatible with a wide range of HVAC systems:

• 1 Heat/1 Cool Conventional Systems
• Heat Pump Systems (with or without auxiliary heat)
• Heat-only and Cool-only systems
• Systems using fan control

Simple Temperature Control

Adjusting your home’s temperature is easy using the up and down arrow buttons. Precise control ensures maximum comfort while helping save on energy costs.

Built-in System Test Mode

Quickly test heating, cooling, fan, and emergency heat systems with dedicated test functions. Ideal for installers and homeowners to ensure system components are functioning properly.

Compressor Protection Delay

The thermostat features a built-in compressor protection delay (default set at 5 minutes) to prevent rapid cycling and reduce wear and tear on your HVAC system.

Adjustable Filter Replacement Reminder

Never forget to change your HVAC filter again. You can set filter reminders at 30, 60, 90, 120, or 180-day intervals, ensuring optimal air quality and system efficiency.

Temperature Display Options

Users can select between Fahrenheit or Celsius, catering to both U.S. and international users.

Keypad Lockout Security

Prevent accidental or unauthorized changes with partial or full keypad lockout options. Great for commercial settings, rentals, or shared spaces.

Battery Powered or Hardwired Operation

The Honeywell 5000 can be powered by two AA alkaline batteries or hardwired to a 24V AC power source, providing flexibility during installation.

Room Temperature Calibration

Fine-tune the displayed room temperature up to ±3°F for enhanced accuracy, ensuring the thermostat reflects true room conditions.

Energy-Efficient Operation

The thermostat helps reduce unnecessary energy consumption with smart features like fan control options and compressor delay, making it eco-friendly and cost-effective.

Specifications

• Model Compatibility: Focus PRO® 5000 Series
• Power Source:
  • Two AA alkaline batteries
  • 24V AC (optional)
• Temperature Control Range:
  • Heating: 40°F to 90°F (4°C to 32°C)
  • Cooling: 50°F to 99°F (10°C to 37°C)
• Temperature Display:
  • Options: Fahrenheit (°F) or Celsius (°C)
• System Compatibility:
  • 1 Heat/1 Cool Conventional Systems
  • Heat Pump Systems (with/without auxiliary heat)
  • Heat-only Systems (2-wire, zone valves, etc.)
  • Cool-only Systems
  • Systems with fan control
• Compressor Protection Delay: Adjustable from 0 to 5 minutes (default: 5 minutes)
• Filter Replacement Reminder: Adjustable (Off, 30, 60, 90, 120, or 180 days)
• Keypad Lockout Options: None, Partial, Full
• Warranty: Check Honeywell’s official site for product warranty details.
• Certifications: Complies with U.S. and Canadian standards.

 Maintenance & Cleaning

Proper maintenance of your Honeywell 5000 Series Thermostat ensures long-lasting performance and helps your HVAC system run efficiently. Follow these simple maintenance and cleaning steps to keep your thermostat in top condition:

Regular Battery Replacement

The thermostat uses two AA alkaline batteries. Low battery power may cause the display to fade or result in unresponsive controls.

Recommended:

• Replace batteries once a year or as soon as the low battery icon appears on the display.
• Always use high-quality alkaline batteries for best results.

Clean the Thermostat Exterior

Dust and dirt can accumulate on the thermostat over time, affecting its appearance and button functionality.

Steps to Clean:

• Gently wipe the exterior using a soft, dry cloth.
• For stubborn dirt, slightly dampen the cloth with water (avoid chemical cleaners).
• Do not spray water or cleaners directly onto the thermostat.
• Ensure no moisture enters the internal components.

Inspect and Replace Air Filters

Though the thermostat itself doesn’t require filter replacement, it features a Filter Change Reminder to help you maintain your HVAC system.

• Check your HVAC air filter as per the reminder (every 30, 60, 90, 120, or 180 days, depending on your setup).
• Replace filters regularly to maintain good air quality and efficient airflow.

Check Temperature Calibration

If you notice temperature discrepancies, use the thermostat’s Temperature Offset feature (Installer Setup Function 39) to recalibrate the displayed room temperature by ±3°F.

Inspect Wiring Connections (If Applicable)

For hardwired units:

• Periodically check wiring connections to ensure they’re secure.
• Turn off power before opening the thermostat to inspect wiring.
• Seek professional assistance if you are unsure about handling wiring.

Troubleshooting Guide

Here’s a quick fix guide for common Honeywell 5000 thermostat issues:

Display is Blank

• Possible Cause: Batteries are dead.
• Solution: Replace with fresh AA alkaline batteries.

Thermostat Not Responding

• Possible Cause: Keypad lockout enabled.
• Solution: Access Installer Setup, check Function 15 (Keypad Lockout) and disable.

Temperature Inaccuracy

• Possible Cause: Calibration off.
• Solution: Access Function 39 in Installer Setup to adjust displayed temperature (+/- 3°F).

Heating/Cooling System Not Turning On

• Possible Causes:
  • System type incorrectly set.
  • Compressor protection delay active.
• Solution:
  • Recheck system type in Setup Function 1.
  • Allow 5 minutes for compressor delay.

Low Battery Warning

• Solution: Replace batteries immediately to avoid thermostat failure.

FAQS

DOWNLOAD PDF

d666b6a4ca143914d1dbc4917b07b06786d4768f1db81fefbb2e9c67814507f2_optim