You are currently viewing Honeywell T6 Installation Manuals 2024

Honeywell T6 Installation Manuals 2024


Honeywell T6 Installation Manuals 2024

Honeywell T6 product

Honeywell t6 installation manual is an extended worldly business that manufactures a huge range of consumer and manufacturing products, including plane engines, automobile tools, gas turbine power systems, and household gadgets. The company as well as gives provides security systems, energy management, and building automation. It is established in 1906, and its head office is in Charlotte, North Carolina.

The Package Includes 

  • The T6 Pro Thermostat, UWP Mounting System, and Honeywell t6 install manual Adapter (J-box adapter).
  • Honeywell Decorative Cover Plate – Small, size 4-49/64 in x 4-49/64 in x 11/32 in (121 mm x 121 mm x 9 mm).
  • Screws and Anchors
  • Includes two AA batteries, installation instructions, and a user guide.

Optional Cover Plate Installation

Use the optional cover plate when:

  • Attaching the thermostat to an electrical connection box
  • Or when you need to cover a paint gap caused by an old thermostat.
  • Separate the Junction Box Adapter from the Cover Plate. The Junction Box Adapter can be mounted to a wall or an electrical box using any of the eight screw holes. 
  • Insert and tighten the mounting screws supplied with the Cover Plate Kit. Don’t overtighten. Ensure the Adapter Plate is level.
  • Attach the UWP by hanging it from the Junction Box Adapter’s top hook and snapping the bottom in place. 
  • Snap the Cover Plate onto the Junction Box Adapter. Refer to Figure 4 for UWP Mounting System installation.
  • Before you begin, turn off the power at the breaker box or switch. Open the package to locate the UWP.
  • Position the UWP on the wall. Level and indicate the hole positions.
  •  To install wall anchors, drill holes and tap them into place using a hammer. Drill 7/32″ holes in the drywall.
  • Pull open the door and insert the wires through the UWP’s wiring hole..
  • Place the UWP above the wall anchors. Insert and tighten the mounting screws included with the UWP. Don’t overtighten. Tighten until the UWP stops moving. Close the door. 

Setting Slider Tabs

Set the R Slider Tab.

  • Use the built-in jumper (R Slider Tab) to distinguish between one or two transformer systems.
  • If there is only one R wire connected to the R, Rc, or RH terminal, move the slider to the up position (1 wire).
  • If one wire is attached to the R terminal and one to the Rc terminal, move the slider to the down position (2 wires).
  • The Slider Tab can be used to navigate between terminals. See “Setting Slider Tabs” above.
  • The THP9045A1023 Wire Saver Module is utilized on heat/cool systems that have only four wires at the thermostat and require a fifth wire for a common wire. 

Installer setup (ISU)

  • To enter the advanced menu, press and hold CENTER and buttons for around 3 seconds.
  • To enter ISU, press Select.
  • Press Select to go through the menu setting choices.
  • Press or to change values or choose from the available options.
  • Press Select to confirm your selections, or Back to ignore the changes and return to the ISU menu screen to adjust another setup parameter.
  • To end the setup process and save your settings, press Home to return to the Home screen.

Installer System Test

To run a system test:

  • To enter the advanced menu, press and hold CENTER and buttons for around 3 seconds.
  • Use to navigate to TEST. To enter System Test, use the Select button.
  • Use to toggle between Heat, Cool, Fan, Em Heat, and Ver (thermostat version). Choose Select.
  • Press to turn on one stage at a time, then press to turn it off.
  • To exit the system test, press the Home button. 

The honeywell t6 pro installation manual  Thermostat is expected to give you desirable comfort, energy performance, and easy. By following this installation guide, you should be able to easily set up your thermostat and begin enjoying its advantages. If you suffering any problems or have any issues, our customer service staff is here to help.

We hope your new Honeywell T6 Thermostat will be a helpful addition to your house. Thank you for choosing Honeywell, where our mission is to improve your living environment via creative and dependable solutions. Enjoy the comfort and peace of mind that comes with a well-managed environment in your home.

For More Manuals > Manualsclip

Leave a Reply