Bass Jaxx HP-0377 Wireless Headphone User Manual
Introduction
Congratulations, and thank you for choosing the Tempo Wireless Headphones. This manual will help you operate the Tempo Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Tempo Wireless Headphones.
Safety Rules
| Please follow the rules depicted in this manual closely to ensure your safety. Before using these Bluetooth headphones, we would strongly encourage you to read through this user manual. |
| Be more wary of any edges, uneven surfaces, metal parts, accessories and packaging so as to prevent any possible injury or damage. |
| Do not modify, repair or dismantle these Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty. |
| Do not use an diluent or volatile liquid to clean the Bluetooth headphones. |
| Do not use the Bluetooth headphones in a hazardous location. |
Packaging Contents
Connection Diagram
How to use
General Functions
| Turn on & Enter the pairing mode |
Press and hold the MFB for 3 seconds. After turning on, the LED indicator flashes red/blue. |
|
Pairing | Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator slowly blinks with blue. |
| Turn off | Press and hold the MFB for 3 seconds. |
| Charging | Plug the Micro USB to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off. |
| Answering a Call | Press MFB to answer a phone call, and press MFB again to end call. Press and hold 2 seconds to reject call. Double-click to redial last call. |
| Play / Pause Music | Press MFB to play music and press it again to pause music. |
| Active Noise Cancelling On / Off | Press and hold the On/Off button for 1 second to activate or deactivate the ANC function |
Pairing to Mobile phone or other device
To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones are paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
- Turn on your phone and ensure the Bluetooth function is activated.
- Turn on the headphones, and enter the pairing mode. Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
- After a few seconds, the phone will list the “BT TEMPO HP” as a discovered device.
- Select it and follow your phone’s instructions to select this pairing.
- Your phone will confirm the pairing, and then press Yes/OK.
Charging your headphones
For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. *Make sure to keep the headphones charging for a minimum of 2 hours before initial use.
Warning:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth headphones if it has not been used for more than 6 months.
Product Specification
- Driver Diameter: 40 mm x 2
- Impedance: 32 Ohms
- Frequency Response: 20 Hz – 20 KHz
- Sensitivity: 102 dB +/- 3 dB
- ANC: -18 dB
- Power Supply: Li-ion Battery 3.7V 200 mAh
- Playing Time: 3 – 4 Hours
- Charging Time: 2 Hours
- Bluetooth Range: 32.8 Feet
Micro USB Charging Cable Included
FAQ
- Why is there no power even when the headphones are turned on? Ans: Ensure the battery has been charged for up to 2 hours for initial use.
- There is no sound when playback. Ans: Check the connection between headphones with your phone or computer, if the connection is not established, please connect again. Make sure the headphones are paired and connected with your target phone or other master device.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
REFERENCE LINK
https://www.amazon.com/bass-jaxx-headphones/s?k=bass+jaxx+headphones
