HYPER-TOUGH-HT19-401-003-11-Cordless-Chainsaw-Guide-prduct-img

HYPER TOUGH HT19-401-003-11 Cordless Chainsaw Guide

HYPER TOUGH logo

HYPER TOUGH HT19-401-003-11 Cordless Chainsaw Guide

HYPER-TOUGH-HT19-401-003-11-Cordless-Chainsaw-Guide-prduct-img

Quick Start Guide

CHARGING PROCEDURE

HYPER-TOUGH-HT19-401-003-11-Cordless-Chainsaw-Guide-fig-1

Connect the battery charger to the power supply and the indicator light should turn to green. Slide the charger base on the battery pack to make connections and the indicator light will turn red to show that the charging has started. When charging is completed, the light will turn green.

INSTALLING THE BATTERY PACK

HYPER-TOUGH-HT19-401-003-11-Cordless-Chainsaw-Guide-fig-2

After recharging, insert the battery pack into the battery port. A simple push and slight pressure will be sufficient until a click is heard. Check to see if the battery is fully secured.

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

Grip the chain tensioning the outer rim and turning it anti-clockwise to loosen the chain. Hold and depress the cover tightening stick, turning it anti-clockwise to remove the chain cover.

0PERATION

HYPER-TOUGH-HT19-401-003-11-Cordless-Chainsaw-Guide-fig-4

Use both hands to grip the saw. Always use your left hand to grip the front handle and your right hand to grip the rear handle. Use a firm grip. Thumbs and fingers must wrap around saw handles.

HYPER-TOUGH-HT19-401-003-11-Cordless-Chainsaw-Guide-fig-5

Hold the chain saw at the right-hand side of your body.

HYPER-TOUGH-HT19-401-003-11-Cordless-Chainsaw-Guide-fig-6

Do not operate the chain saw with arms fully extended, attempt to saw areas which are difficult to reach, or stand on a ladder while sawing.

REFERENCE LINK

https://hypertough-warranty.com/

Leave a Reply