HyperX Alloy FPS Keyboard User Manual

HyperX Alloy FPS Keyboard User Manual

What’s included:

• HyperX Alloy FPS Mechanical Gaming Keyboard
• Detachable USB cable
• 8x Gaming keycaps
• Keycaps puller
• Travel pouch

Keyboard Overview:

Keyboard Installation:

• Connect the Mini USB connector to the keyboard.
• Connect both USB connectors to the computer.

Function Keys:

LED backlight modes:

There are six LED backlight modes: Solid ► Breathing ► Trigger ► Explosion ► Wave ► Custom.

• Solid: Constant lightning (default setting).
• Breathing: Slow blinking that mimics breathing.
• Trigger: Individuals keys will light up when pressed and slowly fade after one second.
• Explosion: A lighting effect will radiate from individual keys when pressed.
• Wave: Keys will light up from left to right in a wave pattern.
• Custom: You can choose which keys you want to light up. Follow these steps to customize:
• Switch the backlight mode to custom.
• Hold + Right until the backlight turns off.
• Press the key or keys you want to have backlight ON.
• When finished, press + Right again to save your custom backlight profile.

6KRO and NKRO rollover modes:

Key rollover is a feature allowing every key you press to be correctly registered. 6KRO is enabled by default. This allows up to 6 keys and 4 modifier keys (Windows, Alt, Ctrl, Shift) to be registered at the same time. Switching to NKRO mode enables every key on your keyboard to be registered correctly at the same time.

Keyboard factory reset

If you are experiencing any issue with the keyboard you can perform a factory reset. You will lose your custom LED profile by doing this.

DOWNLOAD PDF LINK

HyperX_Alloy_FPS_User_Manual