iclever IC-GK03 Wireless Keyboard &Mouse Manual

iclever IC-GK03 Wireless Keyboard &Mouse Manual

Package Contents

• 1x Dual-mode Wireless Keyboard
• 1x 2.4G USB Receiver (for 2.4G connection only) 1X Keyboard Cover
• 1x Micro USB Cable 1x User Manual
• 1x Warranty Card

Specification of Keyboard

Indicator Light Description

1. Power Switch: slide right to turn on and left to turn off.
2. Bluetooth Channel Indicator: to indicate which Bluetooth channel 1/2 you are in.
3. 2.4G Wireless Channel Indicator: flash green after switching to the 2.4G wireless mode.
4. Caps lock Indicator: press “Caps lock” key to switch between uppercase and lowercase, and indicator will be green when switch to uppercase.
5. Charging Indicator: stay in red color when charging, and it will turn green after fully charged.When battery capacity is low, it will keep flashing red.
6. Micro Charging Port: for charging.

Pairing Steps

A-2.4G Wireless Connection

• Step 1. Plug the 2.4G USB receiver into the port of computer.
• Step 2. Slide right to power on the keyboard.
• Step 3. Press key ofF lto switch to 2.4G wireless mode.
• Step 4. Done. Ready to use.

If connection fail, please read the FAQ first, then follow below steps:

• Step 1. Slide right to power on the keyboard.
• Step 2. Press key oFf J to   switch  to 2.4G mode.
• Step 3.Press key of “ esc + I: I” 3 seconds simultaneously, then the
• 2.4G indicator will flash green quickly.
• Step 4. Immediately plug the 2.4G USB receiver into the computer within 1Os and keep the keyboard close to the receiver within 30cm (0.98 ft ).
• Step 5. The 2.4G indicator will turn to be green for 2 seconds and then to be off after connection successfully.

NOTE:

• Keep the keyboard off the
• lf re-pairing success.it is able to If failed.please repeat above steps again.

B. Bluetooth Wireless Connection

Pair with 1st device

• Step 1. Slide right to power on the keyboard.
• Step 2. Press key of ⁰¹ for 5 seconds to enter pairing mode in channel 1, and Bluetooth channel 1 indicator will quickly flash blue and start to search the available Bluetooth device.
• Step 3. On your Bluetooth device, find the Bluetooth name ” iclever IC-GK03″ and click to connect it.
• Step 4. The status indicator will be off after successfully paired.

Pair with 2nd device

• Step 1. Slide right to power on the keyboard.
• Step 2. Press key of 0 2 . for 5 seconds to enter pairing mode in channel 2, and Bluetooth channel 2 indicator will quickly flash blue and start to search the available Bluetooth device.
• Step 3. On your Bluetooth device, find the Bluetooth name ” IC-GK03 ” and click to connect it.
• Step 4. The status indicator will be off after successfully paired.

NOTE:

1. Re-connection function: when turn on the keyboard, it can connect with the last used device automatically.
2. lf fail to connect:
   1. restart both the keyboard and your devices;
   2. on your device, delete all the Bluetooth pairing records
3. on your device, turn off your Bluetooth function and turn it on again
4. repeat above “B.Bluetooth Wireless Connection” pairing procedures again

C-Switch among 3 devices

Press key of ( ]   /  0 1 0 2 to s witch among connected devices.

D-Re-pair the channel that already connected

If you already connect channel 1/2 with device A, and you want to use device B to re-connect channel 1/2, please pressing key of 0 1  . / 02 5 seconds to enter pairing mode, then on your device to find ” IC-GK03 ” to re-connect it.

Keys and Functions

Under 2.4g mode,for iOS users(iphone and ipad), use function keys by pressing F1- F12 key directly;For android, windows and Mac OS users, use function keys by pressing Fn + F1- F12 keys simultaneously. For windows and Mac OS users.use F1- F12 keys by pressing F1-F12 directly.

Sleep Mode
The keyboard and mouse will enter sleep mode if idle for 3 seconds. Press any key or move the mouse to exit sleep mode.

Charging the Keyboard

Step 1. Connect one end of the included USB cable to a USB charger, and connect the opposite end to the charging slot on the keyboard.
(Note: Output: DC 5.0 V / 500mA; USB charger is not included)
Step 2. The charging indicator will glow red while the keyboard is charging. A full charge takes approximately 2 hours.

Power Steps for Mouse
If the indicator light is not glowing, the batteries run out of power. Open the storage slot and replace the batteries.

FAQ

I can’t connect the keyboard and mouse to my device.

What should I do?

1. Make sure your device is on.
2. Make sure the 2.4G USB receiver is inserted into a USB port on your device.
3. Make sure your keyboard, mouse, and your device are powered.
4. Make sure the keyboard and mouse are within 10m (32.8ft) of your device.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Reference

https://iclever.com/

Download pdf

iclever IC-GK03 Wireless Keyboard &Mouse Owner Manual_compressed

Buy Related Product on Amazon

Buy on Amazon