Timex iConnect Pro By Timex User Manual
Important Safety Instructions And Warnings
- To prevent the risk of fire, chemical burn, electrolyte leak, and/or injury from the unit’s internal Lithium-polymer battery:
- Do not attempt to remove the case back or exterior shell of the unit, or to remove its non-user-replaceable battery.
- Do not leave the unit exposed to a heat source or in a high-temperature location (such as in the sun or in an unattended vehicle). To prevent damage, store the unit out of direct sunlight.
- Do not puncture or incinerate the unit.
- When storing the unit for an extended time, keep it in the 32°F to 77°F (0°C to 25°C) temperature range.
- Charge the unit only within the 50°F to 113°F (10°C to 45°C) temperature range.
- Use only the charging cable supplied with this product.
- This unit is not a medical device and is not recommended for use by persons with serious heart conditions. Always consult your physician before beginning or modifying an exercise program.
- Do not attempt to read the unit’s display while moving: this is unsafe and distracting and could result in an accident or collision. Read the display only when you can safely do so. See instructions for details.
Product Features
Notifications, Caller ID, Optical Heart Rate Monitor, Activity Tracking, Sport Mode, Sleep Tracking, Music Control, Camera Control, Alarm Clock, Sedentary Reminder, Weather, and Selectable Watch Faces.
Product Specifications
- Model: M 05 J
- Memory: RAM 256KB ROM 128Mb
- Capacitive touch screen 1. 3 360 360 pixels AMOLED IPS
- Bluetooth: version 5 .0
- Function: Heart Rate, Anti-lost, P pedometer, Sleep monitor, notification
- Battery: Lithium-ion 3.8V/310 mAh
Product Details
MODE button:
Press the MODE button from the time of day screen to enter the Sports Mode directly. Swipe the screen up and down to navigate different sports modes. Tap on the icon to select the corresponding sport mode and start the workout.
HOME button:
Press and hold the button for 5 seconds to turn on or shut down the watch. After the watch is on, short press the button from the time of day screen to turn off the display. Short press the button in the menu or sub-menu to return to the time of day screen.
MENU button:
Press the button from the time of day screen to enter the menu directly. Swipe the screen up and down to navigate different functions in the menu. Tap on the icon to select the corresponding function or enter the related submenu.
Features and Functions
Basic Operations
In the TOD screen, swipe the screen left to select different dial faces. Stay idle for 2 seconds after choosing the desired dial face to confirm the selection. In the TOD screen, swipe the screen right to enter the menu. Different functions in the menu are shown below.
- Daily activity Record the activity data of the current date.
- Heart rate Measure heart rate
- Message Check message pushed from the phone.
- Sleep Record the sleep of last night
- Weather Weather information
- Sports mode Different workout modes include Walking, Running, Hiking, and Biking.
- Timer Stopwatch
- Find the phone Find the connected phone.
- Setting Allow manually adjusting the screen brightness, enabling vibration, and showing system information.
- Shutdown Shut down the watch
In the TOD screen, swipe the screen down to show short cut icon of the menu item Setting, Always ON Mode, Fine Phone, Shutdown, and Timer. In the TOD screen, swipe the screen up to show new pushed messages. The screen will be off after being idle for about 10sec. Simply pushing the HOME button to light up the screen.
Watch Faces
Getting Connected
4.1 The iConnect By Timex 2 App
You have to download and install the “iConnect By Timex 2” App from APP Store or Google Play Store; iPhone with IOS 10.0 or higher and an Android phone with Android 6.0 or higher are recommended.
Connection and Synchronize Data
4.2.1 For Android: Open iConnect By Timex 2 – left slide menu bar – Pair my watch – select the corresponding device icon – search for the corresponding Bluetooth address pairing. Click OK and Click Pair to bind the watch as below.
Connect Step 1:
Open “iConnect By Timex 2”- left slide menu bar – Pair my watch – select the corresponding device icon – search for the corresponding Bluetooth address pairing
Connect Step 2: Now the Bluetooth menu interface displays iConnect Pro connected 5 successfully as shown below:
Main Features
4.3.1 Daily Activity
- Function introduction: The watch will display the user’s total number of steps on the day, walking distance, and calories burned on the same day, and the data will be cleared at 0 o’clock every day.
- Operation instructions: the main interface slides left and right, clicks the motion data to switch to the step counter interface and automatically stops the screen after 5S without operation.
Heart Rate
- Function introduction: Heart rate measurement: The watch will measure the user’s heart rate under the heart rate measurement interface. After the test is completed, the vibration will display the result. After no operation, the screen will automatically go out.
- Operating instructions: Heart rate measurement: slide to the left on the main interface and click the heart rate static icon to switch to the heart rate measurement interface. Once the interface is entered, the 7 measurements will start. “- -” is shown on screen when the watch starts the measurement. The measurement will take about 40sec to come up with a stable value to be displayed on the screen, which will be indicated with vibration on the watch. If no value is displayed, please return to the menu and re-enter the heart rate measurement interface and try again.
Message
After pairing the watch to the phone, notifications from your phone will be sent to your watch. It is necessary to switch on the supported message-sending software in the App in advance on the Notification Settings page. Please note that the notifications are shown in characters but not in words. Emojis are not supported on notifications.
Sleep
- Function introduction: The watch will display the user’s sleep time of the previous night. The default sleep measuring period is from 21:30 on the current day to 12:00 on the next day.
- Check measured Sleeping time: Drag the TOD screen to the right side. Tap on the Sleep icon to enter the sleep interface. “Monitoring……” on the screen indicating the watch is still measuring the sleeping time. Once the watch detects valid activity after sleep, the sleeping time counting will stop and the measured sleep time of the previous night will be displayed on the screen.
Find phone
Single tapping the Find phone icon to attempt to find the paired phone. The phone vibrates and rings indicating the phone is found. A Disconnect icon shown on the watch screen indicates the watch has not been connected successfully to any phone.
5.2 Heart Rate Monitoring.
The watch will automatically monitor your heart rate in 5-minute intervals s and the measured HR value will be synced to the App automatically. The measured value will be shown on the Heart Rate block in the Dashboard of the App In the App, you can initiate real-time measurement of heart rate. Tap on “Start” to start heart rate monitoring and the measured heart rate will be shown in a graphical manner. Tap Close to end monitoring.
Step History
Tap on the block “Today’s steps” or “Activity data” will enter the “Step History” page. The user is allowed to adjust the goal of the step by tapping on the “set up” located at the top right corner. The step count recorded per day and the accumulated step count will be shown under Step History.
My Friends
Add friends to compete in daily activities with each other. Enter “My Friend” in the Navigation menu. Tap on the “add friend” icon at the top right corner to enter the “Add Friend” page. Type the email address of desired friend and search. The users with the name searched will be listed. Tap on the “Add friend” button to add the friend.
Motion Record
Tap on the Motion Record icon at the top right corner of the dashboard page. Then, tap on the “Start” button to enter the workout page. There are several workout choices, Walking, running, Biking, Hiking, Run Indoor, and Trial Run, available in Motion Record. Choose a desired workout mode.
Features in the iConnect By Timex 2 App
5.1 Sleep Monitor.
Wearing the watch at night will allow you to monitor your sleep schedule and analyze the quality of your sleep according to your nocturnal movements.
Heart Rate Monitoring.
The watch will automatically monitor your heart rate in 5-minute intervals and the measured HR value will be synced to the App automatically. The measured value will be shown on the Heart Rate block in the Dashboard of the App In the App, you can initiate real-time measurement of heart rate. Tap on “Start” to start heart rate monitoring and the measured heart rate will be shown in a graphical manner. Tap Close to end monitoring.
Step History
Tap on the block “Today’s steps” or “Activity data” will enter the “Step History” page. The user is allowed to adjust the goal of the step by tapping on the “set up” located at the top right corner. The step count recorded per day and the accumulated step count will be shown under Step History.
Other Safety and Precaution
Notices Bluetooth® Wireless Technology
Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility. The device can communicate with other Bluetooth devices (e.g. BT headsets) within a range of approximately 10 meters (33 feet).
Recycle
Always return your used electronic products, batteries, and packaging materials to dedicated collection points.
Battery and Charger Info
Your device has an internal, non-removable, rechargeable battery. Do not attempt to open the back cover or remove the battery, as you may damage the device. To replace the battery, take the device to the nearest authorized service facility.
Aircraft, Hospitals
CAUTION: The device’s Bluetooth radio must be switched to OFF in airplanes, hospitals, or other public locations where handheld wireless and other electronic devices are prohibited.
Driving Precautions
Responsible, safe driving is your responsibility when operating a vehicle. Using a mobile device or accessory for messaging while driving may cause distraction and could result in death or injury to you or others. Using a mobile device or accessory may be prohibited or restricted in certain areas; always obey the laws and regulations on the use of these products. While driving, NEVER:
- Read messages
- Review on-screen data
- Perform any other functions that divert your attention from driving.
FCC Notice (U.S.) / IC Notice (Canada)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
This Class [B] digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
