Table of contents
show
IFox IFS303 Ultra Portable Wireless Bluetooth Speaker User Manual
Introduction
Thanks for choosing this iFox Creations Bluetooth Speaker. Please read this user manual carefully before operation.
Key Features:
- Bluetooth wireless
- Hands free talk support
- Redial the last phone number
- Aux line in function
- Aux line out function
- FM radio function
- TF card Function (MP3)
Product Description
- Bluetooth 3.0 wireless
- Bluetooth protocol: Support A2DP and AVRCP profile
- Frequency Range: 100Hz-20KHz
- Distortion: ≦0.5%
- SNR: ≧85dB
- Operating Voltage: 3.7V
- Charging Voltage: DC 5V
- Charge Time: approx. 3 hours
- Playing Time: approx. 6 hours
- Operating Distance: 10 Meters
- Compatible: for tablet pc/laptop/computer/smartphone and other Bluetooth devices
Bluetooth Pairing
Please make sure your cell phone (or media playing device) is Bluetooth-enabled. Specific pairing steps may vary with different devices. Please refer to the user manual of your device for further information.
- To pair, firstly, turn on the speaker in Bluetooth mode.
- Activate the Bluetooth function in your media playing device such as smartphone, tablet or other Bluetooth device.
- Choose the speaker ‘My speaker S303’ from the list of Bluetooth devices discovered and pair with the speaker.
- The blue LED light will flash regularly when its paired successfully and connected to the Bluetooth
- Once you have a device paired and would like to pair a different device with the speaker then press and hold down the play/pause button to cut off the connection. Then pair the new device.
Operation instruction
- Switch: Turn on/off
- (M)Mode: Press this button to switch between Bluetooth mode – TF Card mode – FM mode – Line in mode.
- Volume/Next song/Previous song button: Press once to play next/previous song. Press and hold down to increase/decrease volume.
- Play/Pause/Phone button: Press once to play or pause music. Press to answer and hang up a phone call. Press and hold to reject a phone call when a call is coming in. Double click to redial the last phone number. Press and hold to cut off the Bluetooth connection with a device or also if you wish to pair the speaker with a different device.
- The built in microphone supports wireless hands free calling. Press the phone button to receive and hang up calls
- When in Micro SD card mode use the previous and next button to switch songs.
- FM Radio configuration:
- Press M button with Bluetooth/TF/Line in to switch to FM Radio mode
- Press and hold for about 2 seconds the Pause/Play button and the speaker will automatically search for FM radio channels. The speaker saves these channels.
- Once searched you can then press the Next or Previous button to change the channels
- If the reception is poor please put the USB cable into the speaker and search again for FM stations. The USB cable acts as an antenna booster
- Line in: Playing music via audio cable
- Connect the micro USB end of the cable to the speaker;
- Connect the 3.5 mm end to a mobile/laptop etc. audio device
- Play the music on your mobile//laptop etc. audio device
- Line out: Put your earphone end to the 3.5 mm jack on the speaker, then can enjoy the songs
Charging the Speaker
- Connect the plug to the micro USB charging port of the speaker.
- Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. For first time use, a full charge is recommended.
Troubleshooting
- Symptoms Speaker can’t be powered on Not able to pair w/ the speaker
- Volume too low
- Causes Low battery level Speaker already on or not in pairing mode
- Battery is not charged up or Volume is not set to the maximum on the
- Solutions Recharge the battery
- Refer to “Bluetooth
- Pairing” section
- Increase the volume on Speaker.
- Increase the volume on the media player
Safety Instructions
- Do not use this device near any heat sources such as radiators, heaters, stoves, or other heat-producing machinery.
- Do not leave it in direct sunlight.
- Keep the speaker out of children’s reach to avoid a choking hazard.
- Clean with soft cloth. Do not use harsh chemicals to clean.
- Do not clean this device when it is charging. Always unplug from the power source before cleaning the device.
- Do not insert any metal object into the device. Risk of short circuit.
- Do not try to repair or open this device yourself.
- Thank you for buying from iFox Creations. We very much appreciate your custom.
- If you have any problems or questions at any time please contact us by replying to the emails we sent you, through the ‘contact seller’ button in Amazon or through our own ifoxcreations website. Our support team will assist you immediately.
REFRENCE LINK