Altec Lansing IMW1400 Hydra Boom Speaker User Manual
Thank you for purchasing an Altec Lansing product. It’s our goal to make sure you are happy. Share your happiness: with our customer concierge.
A Closer Look
Powering On, Bluetooth Pairing
True Wireless Pairing
Turn on the first speaker and connect it with a Bluetooth-compatible device. Turn on the second speaker and press the 
Press and hold the button for 2-3 seconds on the first speaker. The first spoaker will now connect to the second so they both play in sync. The Link Buttons will eliminate the groom. To end TW5 press & hold the power button on the speaker. There are two modes: Mode 1 Dual Stereo, both play stereo for parties etc. Mode 2: Wide Stereo, one plays left and the other right. Briefly press the button to switch between the modes.
Light Chang Mode
- Multicolor slow transition
- Single color pulse to music
- Multi-color pulse to music
- Single color slow fade
- Single color
- Multicolor cycle changed
- Multicolor quickly changed with the background color
- Multicolor slow fade
- Four-color slow fade
- Four-color rotation with pulse to music
- Four color rotation
In the Box
Charging
Place a Qi-compatible device on the wireless charging pad to charge it
- Make sure that your device is positioned correctly on your charging pad.
- Make sure that there are no other objects on the charging pod.
- Make sure to remove the phone covers before using the wireless charging.
- When using Cl charging if the volume is >50% it will be automatically reduced to 50% 1o conserve battery.
Speaker Controls Voice Assistant/Rese
Horizontal & Vertical Listening
The speaker will automatically switch modes based on its position (horizontal or vertical).
FFC STATEMENT
Changes or medications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FOC Rules. Operation is subject to the following two conditions 1| This device may not cause harmful interference, and (2) this device must accept any interference received, holding interference that may
This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to 1o Part 15 of the FCC Rules. Then miter terence in de drone satant section gainst generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance wan the instructions, may cause harmful interference to radio communications. However, there is no current internet unit rating Hate Santa
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
- Recrient or relocate the receiving antenna.
- Increase the separation between the equipment and recedes
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
