Table of contents
show
Insignia NS-BC130GP1 130-Can Cooler
PACKAGE CONTENTS
- 130-can beverage cooler
- Quick Setup Guide
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this appliance near water.
- Clean only with a damp cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, wall outlets, and the point
where they exit from the appliance. - Do not attempt to modify or extend the power cord of this appliance.
- Unplug this appliance during lightning storms or when it will not be used for long periods of time.
- Make sure that the available AC power matches the voltage requirements of this appliance.
- Do not handle the plug with wet hands. This could result in an electric shock.
- Unplug the power cord by holding the plug, never by pulling the cord.
- Do not turn the appliance on or off by plugging or unplugging the power cord.
- Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any way, such as when the power-supply cord or plug is damaged, when liquid has been spilled or objects have fallen into the appliance, or when the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of fire or electric shock, do not expose this appliance to rain, moisture, dripping, or
splashing, and do not place objects filled with liquid on top of it.
Grounding requirement
This cooler must be grounded. This cooler is equipped with a cord that has a grounding wire and plug. The plug must be inserted into an outlet that is properly installed and grounded. Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood or if doubt exists as to whether thecooler is properly grounded.
FEATURES
- 130-can, 4.6 cu. ft. capacity holds your favorite drinks
- Flexible 34–50°F (1–10°C) temperature range chills drinks perfectly
- Touch controls and LED display for easy control
- 3 removable wood-trimmed shelves for additional storage options
- Reversible glass door for convenient entry options
- Adjustable legs keep your cooler stable
- Auto defrost prevents ice and condensation build-up
- White LED light makes it easy to find your drinks
Control panel/display
USING YOUR COOLER
Setting the temperature
- Press the temperature up ( ) or down ( ) buttons to increase or decrease the temperature by one degree. The temperature range is 34–50° F (1–10° C).
- Press and hold the temperature up ( ) and down ( ) buttons at the same time for three seconds to switch between Fahrenheit and Celsius.
- Note: If you experience a power outage, your cooler will resume cooling at
the temperature it was set to before the outage when it is turned on again.
Using the display
- When you plug in your cooler for the first time, the display screen turns on for three seconds, and you hear a start-up buzzer.
- In normal mode, the display shows the set temperature.
Lighting your cooler
- Press the light ( ) button to turn the light on or off. The buzzer sounds when the light is turned on or off.
Entering standby mode • Press and hold the standby ( ) button for three seconds. The buzzer sounds and the display turns off. - To return to normal mode, press Standby ( ) again.
Reversing the door
- See the online User Guide for steps on reversing the door.
CLEANING YOUR COOLER
- Turn off your cooler and unplug it from the wall outlet.
- Remove all beverages.
- Wash the interior with a damp, warm cloth.
Note: It is recommended that you soak your cloth in a baking soda solution before washing the interior. Mix one quart of warm water and twotablespoons of baking soda. - Clean the door gasket (seal) so the door closes properly.
- Dry the interior and exterior with a soft cloth.
TIPS ON SAVING ENERGY
- Place your cooler in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight.
- Do not overload the cooler, because it forces the compressor to run longer.
- Do not open the door too often, especially if the weather is very hot. Close the door as soon as possible to prevent cool air from escaping.
- Make sure that the door seals completely to keep your cooler running efficiently.
- Make sure to keep the door gasket (seal) clean to keep your cooler running efficiently.
- Make sure that your cooler is sufficiently ventilated and is in a room with adequate air circulation.
SPECIFICATIONS
- Dimensions (W×D×H): 21.4 × 22.2 × 33.6 in. (54.5 × 56.5 × 85.5 cm)
- Weight: 94 lbs. (42.5 kg)
- Power requirements: 115 V~60 Hz-70.5 W
- Current: 1.2 A
- Ambient operating temperature: 50 ~ 85°F (10 ~ 30°C)
- Power cord length: 5.4 ft. (1.65 m)
- Cooler temperature range: 34 ~ 50°F (1 ~ 10°C)
TROUBLESHOOTING
Fault indication
If a fault is detected, the display shows one of the following codes:
- E1: Temperature sensor fault
- E4: Defrost sensor fault
If either of these error codes appears on the display, please contact your local dealer or service
center. Do not try to repair the cooler yourself.
Download Link
https://www.insigniaproducts.com/pdp/NS-BC130GP1/6405496
