iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-featured-img

iRobot 600 Series Roomba Vacuuming Robot User Manual

IRobot-Braava-Jet-240-Mopping-Robot-User-Instructions-Image

iRobot 600 Series Roomba Vacuuming Robot User Manual

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-prduct-img

Important Safety Instructions

  • Heed all warnings on your robot, and its parts.
  • WARNING: Risk of electric shock, use indoors in a dry location only.
  • Your robot is not a toy. Do not sit or stand on this device. Small children and pets should be supervised when your robot is operating.
  • Store and operate your robot in room-temperature environments only.
  • Do not use this device to pick up sharp objects, glass, or anything that is burning or smoking.
  • Do not use this device to pick up spills of water bleach, paint, other chemicals, or anything wet.
  • Do not spray or pour liquids on your robot.
  • Before using this device, pick up objects like clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects. If the device passes over a power cord and drags it, there is a chance an object could be pulled off a table or shelf.
  • If the room to be cleaned contains a balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation.
  • Do not place anything on top of your robot.
  • Be aware that the robot moves on its own. Take care when walking in the area that the robot is operating in to avoid stepping on it.
  • Do not operate the robot in areas with exposed electrical outlets on the floor.
  • Do not use non-rechargeable batteries. Use only the rechargeable battery supplied with the product. For replacement, purchase an identical iRobot battery or contact iRobot Customer Care for alternative battery options.
  • CAUTION: Only charge one of the following iRobot batteries: maximum 14.8V, max 3000mAh Ni-MH, or maximum 3300mAh Li-ion battery. Another type of battery may burst causing injury. Always contact Customer Care for the correct replacement of your battery.

About your Roomba

Top View 

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-1

Home Base

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-2

Buttons & Indicators

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-3

Bottom View

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-4

Using your Roomba

Positioning the Home Base®
Place the Home Base in an open, uncluttered area leaving the following distances around the Home Base:

  • At least 1.5 feet (0.5 meters) on each side of the Home Base
  • At least 4 feet (1.2 meters) in front of the Home Base, and at least 4 feet (1.2 meters) away from the stairs
  • At least 8 feet (2.4 meters) from Virtual Wall Barriers Always keep the Home Base plugged in.
Use Instructions
  • Turn your robot over and remove the battery pull tab. Then place Roomba on the Home Base to charge the battery.
  • To fully charge the battery before the first cleaning cycle, allow Roomba to charge on the Home Base for 3 hours.
  • Manually wake Roomba up by pressing CLEAN once. To start a cleaning cycle, press CLEAN again.
  • To pause Roomba during a cleaning cycle, press CLEAN.
  • To resume the cleaning cycle, press CLEAN again.
  • To end the cleaning cycle and put Roomba in standby mode, press and hold CLEAN until Roomba’s indicators turn off.
  • To send Roomba back to its Home Base during a cleaning cycle, press DOCK on Roomba. This will end the cleaning cycle.
  • To use SPOT Cleaning, place Roomba on top of the localized debris and press SPOT on the robot. Roomba will thoroughly clean the area by spiraling outward about 3 feet (1 meter) in diameter and then spiraling inward to where it started. Note: After each use, empty the bin and clean the filter.
  • Always store Roomba on the Home Base so it’s charged and ready to clean when you need it. If storing off of the Home Base, remove the battery first and then store Roomba and the battery in a cool, dry place.

Battery and Charging
Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check the status of the battery by pressing the CLEAN button to illuminate the Battery Indicator or the CLEAN button. Use this chart to determine the status of the battery while charging.

Indicator ColorBattery Status
AmberCharging
Solid greenFully charged

 

Scheduling

You can schedule Roomba to clean once per day, up to seven times per week. You must set the time before setting a schedule.

To Set or Change the Cleaning Schedule

  1. Press and hold SCHEDULE.
  2. While holding SCHEDULE, use the DAY, HOUR, and MINUTE buttons to set the schedule.
  3. Release SCHEDULE. Roomba will beep to indicate that the schedule has been set.

To Delete a Scheduled Cleaning Time

  1. Press and hold SCHEDULE.
  2. While holding SCHEDULE, press the DAY button to cycle through scheduled cleaning times.
  3. When Roomba displays the scheduled cleaning time you’d like to delete, press and hold DAY for five seconds.
  4. Release SCHEDULE.  Roomba will beep to indicate the cleaning time has been deleted.

Accessories

The Dual Mode Virtual Wall Barrier

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-5

The Dual Mode Virtual Wall barrier keeps Roomba in the places you want to be cleaned — and out of the ones you don’t. In between cleaning cycles, you can leave the device operating in its position on the floor. You can set your device to one of two modes to fit your home’s cleaning needs: Note: Under normal use, batteries will last 8-10 months. If you are not planning on using your Virtual Wall device for an extended period of time and you would like to store it, be sure to switch it to the “Off ” (middle) position.

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-6

Virtual Wall Mode: When the switch is in the “up” position (iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-7 ), the device functions as a Virtual Wall. This means that you can set it to block openings of up to 10 feet (3 meters). It creates an invisible, cone-shaped barrier that only Roomba can see. Note: This barrier gets wider as it gets further from the device (refer to illustration).

Halo Mode: When the switch is in the “down” position (iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-7 ), the device creates a protective zone that Roomba will not enter. This prevents Roomba from bumping into items you want to protect (e.g. a dog bowl or vase) or crossing into undesired areas (e.g. a corner or under a desk). The Halo is invisible and reaches approximately 24 inches (60 centimeters) from the center of the device.

Regular Robot Care
To keep Roomba running at peak performance, perform the following care procedures. If you notice Roomba picking up less debris from your floor, empty the bin, clean the filter and clean the brushes.

Robot PartCare FrequencyReplacement Frequency
BinAfter each use
FilterOnce per week (twice per week in homes with pets)Every 2 months
BrushesOnce per week (twice per week in homes with pets)Every 6-12 months
Front Caster WheelOnce every two weeksEvery 12 months
Side Brushes Cliff Sensors

Charging Contacts

 

Once per month

 

Note:
iRobot manufactures various replacement parts and assemblies. Purchase replacement parts by visiting www.irobot.com/Roomba600. If you have questions regarding replacement parts, please contact iRobot Customer Care for more information.

Emptying the Bin

Press the button and pull to remove the bin.

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-8

Cleaning the Filter
Pull the filter to remove it. Tap the filter against the rubbish container to clear the debris. Reinstall the filter.

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-9

Replace the filter every two months.

Cleaning the Brushes 

  1. Open the brush guard by lifting both tabs.
    iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-10
  2. Remove the brushes and remove any hair or debris.
    iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-11
  3. Remove and clean the hair and dirt from the brush bearings.

iRobot-600-Series-Roomba-Vacuuming-Robot-User-Manual-fig-12

Troubleshooting

Problems While Cleaning
If the battery is low, the Battery Indicator or CLEAN button will illuminate red. Please charge immediately. Place the Roomba on the Home Base to charge. If the Roomba encounters an error while cleaning, the Troubleshooting Indicator or CLEAN button will blink and you will hear an audible error message. Follow the audible instructions. The message can be repeated by pressing CLEAN. If the problem persists, visit global.irobot.com to contact your local customer support center.

Problems While Charging
If Roomba encounters an error while charging, the Troubleshooting Indicator will blink and you will hear an audible error message. Check charging contacts on the robot and Home Base to ensure that they are clean and free of debris. If you continue to experience problems while charging, visit global.irobot.com to contact your local customer support center. If you have questions or comments about this product, please contact iRobot before contacting a retailer. Visit the iRobot Owner’s Center site at global.irobot.com for support tips, frequently asked questions and information about accessories and other iRobot products.

Lithium Ion Battery

Important: Lithium-ion batteries and products that contain lithium-ion batteries are subject to stringent transportation regulations. If you need to ship this product (with the battery included) for service, travel, or any other reason, you MUST comply with the following shipping instructions:

  • Remove the lithium-ion battery from the product
  • Turn the robot over and remove the side brush screw and then remove the side brush by pulling gently.
  • Unscrew the four screws on the bottom cover and lift off the bottom cover.
  •  Remove the battery.
  • Place a piece of tape over the battery’s metal charging contacts
  • Reinstall the battery (with the tape on it) in the product and secure the battery door
  • Package the product in its original packaging or in your own packaging that prevents any movement during transportation
  • Ship via ground transportation only (no air shipping)

iRobot Customer Care

USA & Canada
If you have questions or comments about your Roomba, please contact iRobot before contacting a retailer. You can start by visiting www.irobot.com/support for support tips, frequently asked questions, and information about accessories. Should you still need assistance, call our Customer Care team at (877) 855-8593.

iRobot Customer Care Hours:

  • Monday to Friday, 9 AM – 9 PM Eastern Time
  • Saturday and Sunday, 9 AM – 6 PM Eastern Time

Outside USA & Canada
Visit global.irobot.com to:

  • Learn more about iRobot in your country
  • Get hints and tips to improve your Roomba’s performance
  • Get answers to questions
  • Contact your local support center.

For EU Declaration of Conformity information, visit www.irobot.com/compliance

©2017 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA. All rights reserved. iRobot, Roomba, iAdapt, Home Base and Virtual Wall are registered trademarks of iRobot Corporation. AeroVac and Dirt Detect are trademarks of iRobot Corporation.

REFERENCE LINK

https://about.irobot.com/sitecore/content/north-america/irobot-us/home/roomba/600-series

Leave a Reply