Cocoon IT414078 6 Zone Wireless Alarm Kit User Manual

Cocoon IT414078 6 Zone Wireless Alarm Kit User Manual

Warranty Details

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.

Safety Instructions

•  Do not expose this product to water, rain, moisture or dust. Electronic products of this kind should never be subjected to moisture or extreme temperatures.
•  There are no user-serviceable parts inside this product.
•  Do not repair the unit yourself. If your device is not functioning correctly, disconnect the product from power, remove batteries, and contact after sales support.
•  Supervise young children to ensure they do not play with the product.
•  Do not expose to water, dust, moisture, chemicals, oils or other liquids.
•  Do not expose to naked flames or other heat sources.
•  Do not drop or subject the device to undue shock.
•  Keep device away from magnets at all times.
•  Keep away from direct sunlight.

Parts List

1. 1 X Control Panel
2. 4 X Door/Window Sensors
3. 2 x PIR Sensors
4. 2 x Key Ring Remote Controls
5. 1 x Getting Started Guide
6. 1 x Instruction Manual
7. 1 x Warranty Card
8. 3 x AA Batteries (Control Panel)
9. 6 x AAA Batteries (PIR Sensors)
10. 16 x LR44 Batteries (Door/Window Sensors)
11. 2 x CR2032 Batteries (Remotes)
12. 2 x Mounting Accessories
13. 6 x Screws & Screw Anchor Sets

Technical Specification

Remote Control

Battery Type:                               CR2032
Frequency:                                   433.92MHz ± 250KHz
Transmission Distance:                 ≥ 60 M (Open Area)

Door/Window Sensor

Voltage:                                         6V DC
Alarm Volume:                         ≈ 95dB
Frequency:                                   433.92MHz ± 250KHz Response Distance:                      ≈ 15mm
Alarm Time:                               ≈ 10 Seconds Transmission Distance:       50 m (Open Area)

Product Overview

 Product Features

Simple DIY installation and complete battery operation allows you to set up sensors to suit your needs.

•  2 x Passive Infrared Sensors detect motion up to 8m away.
• Wireless sensors for easy installation around your home or office.

 Item Overview

1. PIR Sensors
2.  Alarm Control Panel
3. Remote
4. Door/Window Sensors

Control Panel

1. Speaker
2.  Indicator Lights
3.  Mode Switch
4.  Code Button
5.  USB Port
6.  Mounting Point
7.  Battery Compartment

 PIR Sensor

1. Infrared Sensor
2.  Indicator Light
3. Mounting Point
4.  Battery Compartment

 Door/Window Sensor

1.  Sensor
2.  Speaker
3. Indicator Light
4.  Magnetic Strip
5.  On/Off Switch
6.  Battery Compartment

Remote

1. Lock Button
2.  Unlock Button
3. Home Button
4.  Emergency Button

Installation

Unpack

Unpack the Cocoon 6 Zone Wireless Alarm Kit from the packaging and check you have all the components:

•  1 X Control Panel
• 4 X Door/Window Sensors
•  2 X PIR Sensors
•  2 X Key Ring Remotes
•  1 X Getting Started Guide
•  1 X Instruction Manual
• 2 x CR2032 Batteries
• 3 X AA Batteries
• 6 X AAA Batteries
• 16 X LR44 Batteries
• 2 X Mounting Accessories
•  6 x Screws & Screw Anchor Sets
•  1 X Warranty Card

Control Panel Setup

1.  Remove back cover and remove plastic battery tabs to turn on device. Optional: Connect a Micro USB charger (Not Included) to power the unit
2. Fix control panel to an interior wall by using the mounting accessories included.

 PIR Sensor Setup

1.  Remove PIR Sensor back cover and remove plastic battery tabs to turn on device.
2.  Choose a location for each PIR sensor. An ideal location is one that an intruder is likely to walk past.
3. Determine installation height for each mounting bracket.
4.  After installation, walk close to the sensor and watch for the LED indicator to flash.
5.  Adjust the angle of the PIR sensor to achieve best detection coverage.

 Door/Window Sensor Setup

1.  Remove Door & Window Sensor battery cover and remove plastic battery tab to engage device.
2.  Choose a location for each Door/Window sensor.
3.  Carefully remove the backing of the adhesive tape and attach transmitter and magnetic bar to a clean, dry surface on the opening edge of door or window.
4.  Close the battery cover.

 Remote Control Setup

1.  The remotes will come ready to use and don’t require any setup.
2.  Keep the remotes in a secure location that allows you to easily arm and disarm the alarm. An example is to attach the remote control to your keys or in a drawer beside your bed.

 Arming The Alarm

“Out” Arm Mode: Press the on the remote control to arm. The control panel will emit a warning tone. In this mode, the Door/Window sensors and PIR sensors can be triggered. “Home” Arm Mode: Press the on the remote control to arm. The control panel will emit a warning tone.

Disabling The Alarm

Press the on the remote to turn off warning tone and exit arm mode.

Further Instructions

Alarm Types

The Cocoon 6 Zone Wireless Alarm Kit has different alarm modes to suit different needs:
Emergency Mode: If there is an emergency, press the button on the remote control. The control panel will emit an will alarm immediately.
Alarm Mode: The Control Panel will emit a loud alarm for 30 seconds after any of the sensors are activated.

 Code Pairing

At times you may be required to re-pair a sensor, or pair a new sensor. Follow this procedure to ensure all sensors are paired correctly:

1.  Press the CODE button on the side of the control panel. A warning tone (single beep) will indicate that pairing mode has begun.
2.  The process for pairing the sensors and remotes vary:

•  Remote Controls: Press any key on the remote.
•  Door/Window Sensors: Trigger the sensor by simulating a door opening.
•  PIR Sensor: Activate the sensor by waving your hand in front of it.

Resetting Pairing

1.  Ensure the Control Panel switch is set to “OFF”.
2.  Hold down the “CODE” button.
3. Release the “CODE” button.
4.  To re-pair the sensors/remotes, follow the steps under section 3.2.

Troubleshooting

DOWNLOAD PDF

Cocoon IT414078 6 Zone Wireless Alarm Kit User Manual

REFERENCE LINK

https://support.cocoonproducts.com.