Jlab Talk Pro USB Microphones User Manual

Jlab Talk Pro USB Microphones

SETUP

1. Connect USB-C to Talk PRO microphone.
2. Enter your PC or Mac settings to make sure connection is established.
3. SETUP TALK PRO with PC / MAC

SETUP TALK PRO WITH PC (WINDOWS 7, 8, or 10)

1.  From the Start menu, select the Control Panel.
2.  From the Control Panel, select the Sound icon.
3.  Select the Recording tab and select “JLab Talk PRO”.
4.  Select the Playback tab and select “JLab Talk PRO”.

• SETUP TALK PRO WITH MAC (macOS 10.10 or HIGHER)

1.  Open System Preferences and select the Sound icon.
2.  Select the Input tab and select “JLab Talk PRO”.
3.  Select Output tab and select “JLab Talk PRO”.
4.  From this screen, set the Output volume to desired level.

CONTROLS

IN USE

• The Talk PRO works with almost any recording software installed on macOS, Windows, or Linux. Review in your software’s setting and adjust accordingly.
• No additional drivers/software are needed for the Talk PRO. Simply plug in and setup in device settings.
• Talk PRO will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.

YOUR WARRANTY

All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US

Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact

Download Pdf Link

https://cdn.shopify.com/s/files/1/0240/9337/files/Talk_PRO_Microphone_Manual.pdf?v=1621028683