Occiam K23 True Wireless Sport Headphones User Manual
What’s in the box?
Note:
Please Remove Protective Films of The LED Power Display and Charging Contacts Before Using It.
Overview
Product Parameters
- Bluetooth Version: BT5.0
- Supports: HSP/HFP/A2DP/AVRCP
- Charging Port: Type-C
- Battery Capacity: 75mAh Charging case: 500mAh
- Battery Life: Twin Earbuds will last 8 hours on a single full charge(Actual battery life changes with the song types and volume requirements)
- Standby Time: Up to 100 hours
- Charging Time: 1-1.5 Hrs for earbuds / 2.5Hrs for charging case
- Transmission Range: 33 feet (with no obstacle)
Bluetooth Connection with Mobile Phone.
(Prior to first use – Please be sure both the Earbuds and the Charaina Case are fully charged.)
Step 1- The twin earbuds can be automatically powered on and paired when they are taken out of the charging case. [If the earbuds are not connected to your device for over 3 minutes, the earbuds will power off automatically. Turn on the earbuds manually by pressing down the MFB button for about 3 seconds at the prompt “power on” and one beep sound.]
Only one earbud LED indicator flashes white which means both earbuds get paired with each other successfully and enter dual ear mode. Step 2 – Activate the Bluetooth setting on your phone, search, and choose “K23” to connect. [ There should be a voice prompt “connected” from both earbuds if you wear them. And the indicators of both earbuds will turn off.] In dual ear mode, if you only want to use one earbud for music or call, just put another earbud into the charging case.
Mono Mode Connection with Mobile Phone.
Each earbud can work independently at mono mode, setting as below: (Before below steps, please empty all the bluetooth name K23 on your mobile phones, turn off the bluetooth of your phones.) One earbud connects the mobile phone A Step 1. Power on: Take one earbud out of the charging case. Step 2. Reset: Click the MFB button three times to clear the previous pairing memory. The earbud will power off. Press 3 seconds to turn on the earbud manually at the prompt “power on” and “pairing”, the indicator of the earbud will flash white light once every 0.5 seconds.
Step 3. Mono mode setting: Double-click the MFB button, the earbud LED indicator flashes quickly for a while, then flashes slowly, that means the earbud enters mono mode. Step 4. Connect with mobile phone: Open the bluetooth of your mobile phone, search “K23” on the mobile phone, and click to connect. When the connection is successful, you can hear the voice prompt “connected”, and the earbud’s indicator will turn off.
One earbud connects mobile phone B
Repeat the above 4 steps to connect another earbud to your mobile phone B. Note: Please Remove Protective Films of The LED Power Display and Charging Contacts Before Using It.
How to reset earbuds?
If you hope both earbuds recover dual ear mode from mono mode, please reset the earbuds. Before the below steps, please empty all the Bluetooth names K23 on your mobile phones, and turn off the Bluetooth of your phones. (1) Take out both earbuds from the charging case, quick-press 3 times on each earbud, and you can hear the voice prompts “du” and “power off”, the previous pairing memory is cleared, and both earbuds are powered off.
(2) Long-press the button of each earbud to turn on the earbuds manually. Then quick-press 2 times on the button of each earbud, and wait for a while. If only one earbud LED indicator flashes white while another earbud led indicator turns off, that means both earbuds get paired with each other sucessfuly and enter dual ear mode. (3) Now open the Bluetooth on your device, and search “K23” to connect.
How to wear the earbuds correctly?
Take out the “R earbud” to wear on the right ear.
The ear hooks are adjustable, you can bend them to fit your ears tighter if needed.
How to place headphones
Functions
For music
- [Functions on “R Earbud”]
- Play/Pause: Click Once
- Next track: Long Press MFB
- Volume + : Quick Double-Click
- Siri: Quick Triple- Click
Note: at single channel mode, the R earbud only supports the next song and volume +.
- [Functions on “L Earbud”]|
- Play/Pause: Click Once
- Previous Song: Long Press MFB
- Volume – : Quick Double-Click
- Siri: Quick Triple- Click
Note: at single channel mode, the L earbud only supports the next song and volume +.
For Call
- Answer Call: Click Once
- End a call: Click Once
- Reject an incoming call: Long Press 25
- Siri: Quick Triple-Click
If there is a new incoming call when you’re already on the first call: (1) Click once to answer a new incoming call, but your first call ended. (2) Long press the button, go on with the first call, new incoming call ends.
Charging
Earbuds Charging
Earbuds start to charge only when you put the earbuds into the charging slot with right way.(You can charge the charging case and earbuds at the same time, or you can charge the charging case first and then charge the earbuds. 1)When being charged, the Earbuds’ LED light will illuminate white. 2) When fully charged, the charging case will automatically stop charging and the earbuds’ LED white light will go off.
Charging Warning
- After a period of time, the earbuds don’t charge or even can’t turn on because of an oxidized magnet connector. You can handle this problem by using an alcohol rag to clean the magnet connector on the earbuds and charging case.
- Earbuds can automatically turn off immediately, meanwhile, start charging when you put them back into the charging case. Also, they will automatically turn on and pair when being picked up.
Charging Case
Charging Type-C USB charging There is a Type-C USB charging cable in the package, please use it to charge the case directly. During Charging, the digital display will flash and display the battery in real-time. After a full charge, the number is displayed as 100.
Wireless Charging
Easy to charge your charging case without cables, just put your charging case on the wireless charging pad. If the charging case doesn’t start to charge, please try to reposition it (Wireless Charging Pad Not Included)
Signal Transmission
The maximum distance that the earbuds can receive the signal transmitted by your phone is 33 feet, but this is if there is no obstacle between the earbuds and the phone. Therefore, to ensure that the earbuds will not cut in or cut out during use, please minimize the distance between the earbuds and the phone and ensure that there is no obstacle between the earbuds and the phone.
Storage and Maintenance
- If the earbuds have been unused for more than 3 months, we recommend that you charge them.
- Please use chargers that are FCC(Federal Communications Commission) approved.
- Do not disassemble the Earbuds.
- Adult supervision is required for children aged 6 and under.
- Do not expose the earbuds in high or low temperatures, do not use the earbuds in a thunderstorm storm. Avoid falling or violent impact of the device. Keep the device away from fire, do not put the device in water.
- Do not use oil or any volatile liquid to clean this product.
FAQ
Q: Why the Earbuds Volume is too low? Even if I have adjusted the earbud’s volume to the MAX? I have tested iPhone and Android Phones.iPhone can do it, but Android can’t, Why?
A: Yes, Android can’t do it. Because the iPhone and Android have different system protocols, the iPhone system can overcome this, but Android can’t be consistent. If you are using an Android phone, you have double-clicked the “R” Earbud button to increase the volume to the maximum, you still think the volume is a little low, you can try to adjust the volume by your phone. Hope this answer will solve your confusion.
Q: Why is there only one earbud with sound after connecting, or both earbuds can’t connect with each other when take out of the charging case?
A: For these 2 issues, you need to reset the twin’s earbuds. The detail process follows: (1) Before using, please make sure the Earbuds are fully charged. Then forget all Bluetooth devices on your phone’s Bluetooth menu and turn off the Bluetooth on all your mobile phones. (2) Take out the twin’s earbuds from the Charging case at the same time, waiting for a while, if only one earbud flashes white light, It means the twin’s earbuds pair with each other successfully. (3) Open the Bluetooth of your mobile phone, and search “K23″ to connect, both earbuds will have the prompt ” connected”. Then both earbuds will have a music sound.
Q: Why do my Bluetooth earbuds keep cutting in and out?
A: There could be a few things that are causing the problem. For example, (1) low battery When the battery for your earbud is in low battery status, it’s going to cause more disconnections. Keeping it fully charged will prevent many of these issues from cutting out. You just need to charge it up. (2) beyond Bluetooth distance If you have too much distance between your Bluetooth headphones and the device you’ve connected it with, your connection can easily drop. Please do not let the distance between the earbuds and your mobile phone be more than 33 feet without obstacles).
(3) you’ve got too many apps going on Too many apps running in your background is a common and easy fix. When Bluetooth is trying to pair with them, it causes interference with the connection. Plus, some devices are rather limited in the number of apps that it can run at the same time. (4) something is interfering If you have another person in the room trying to access the same device, the Bluetooth will go with the primary connection. (5) give it a reset Sometimes, a simple reset is all it takes. Put your earbud back into the charging case, and after one minute, turn it back on and see how it performs. (6) reset your audio device too Sometimes, it’s just that your device is having trouble with the Bluetooth. Reset it by turning it off and then on again.
