Table of contents
show
Machenike K600S-B100W Mechanical Keyboard
DEVICE LAYOUT
- USB TYPE-C PORT
- POWER INDICATOR
- NUM LOCK INDICATOR
- CONNECTION MODE
- CAPS LOCK INDICATOR
- BATTERY INDICATOR
TECH SPECS
GETTING TO KNOW YOUR KEYBOARD
1. CONNECTING VIA US
- Toggle the Mode Switch to Cable mode
- Connect the keyboard via USB cable to the device’s USB port.
2. CONNECTING VIA 2.4GHz
- Toggle the Mode Switch to 2.4G mode
- Hold Fn+4 for 3 seconds till the light flashes fast in yellow, the keyboard is ready to pair
- Insert the 2.4G dongle to your device, the 4 key stops flashing turns to solid yellow and the connection is done
3. CONNECTING VIA BLUETOOTH
- Toggle the Mode Switch to BT mode
- Hold Fn+1/2/3 for 3 seconds till the indicators flashes fast in blue/green/pink, the keyboard is ready to pair.
- Turn on your Bluetooth device and find “K6005-B100W 3.0” or “K600S-B100W 5.0”, then connect. When the keyboard is connected to the Bluetooth device, the indictor turns solid.
- d Press Fn+1/2/3 to toggle between the Bluetooth devices 1/2/3.
4. LIGHTING
- FN+Ins: Press to switch the cycle 20 lighting effects
- FN+ENTER: Press to switch the cycle 8 lighting effects colors. ( The light color can only be modified under the specified light effect.)
- FN+ 1 / V : Backlights Brightness +/-, When set to the limit, NUM, CAP 2 lights flash 3 times, levels adjustable.
- FN+-/->: Effect Speed -/ +, When set to the limit, NUM, CAP 2 lights flash 3 times, 5 levels adjustable.
5. RECORD CUSTOM LIGHTING EFFECTS
- Press FN+BACKSAPCE to enter the record state, and press FN+ BACKSAPCE again to start to record.
- Select the key and press to choose the backlight color you want. ~ After finishing recording press EN+BACKSAPCE to save the effects
6. LOW POWER/CHARGING INDICATION
- Battery voltage < 3.3V: Light effect automatically off, there is a key action when the power indicator slow flashing red light.
- Battery voltage < 3.0V: Keyboard auto shut-off.
- Charging: The power indicator light is always on in red, and the four power indicators in the upper left corner keep flashing in order. Each power indicator represents 25% of the electricity newer
7. POWER SAVING MODE
Keyboard in no operation 1 minute after the backlight off into the standby state, not operated 30 minutes into the Sleep state.
8. RESET
FN+ESC: Press and hold 3 seconds, Restore the lighting effect to factory settings, clear all macro settings and paired devices
WINDOWS SHORTCUTS
PACKING INCLUDE
User manual *1, Certificate of conformity *1, Type-C *1, Switch puller *1, keycap puller *1, additional switches *2
