MINISO K616-833 Wireless Keyboard and Mouse User Manual
Features:
- The keyboard and mouse share a USB receiver and both the keyboard and mouse have their receiver storage compartment to prevent loss
- 2.4G connection, 10 meters stable transmission distance
- The bottom bracket design of the keyboard can adjust the angle of the keyboard for easy use
- Low power consumption, automatically enters power saving mode when not in use
- Mute mouse buttons
Specification Description:
Mouse:
- Size: 9.8cmx5.8cmx3.7cm
- Color: pink
- Connection: 2.4G
- Number of keys: 3 keys
- Working voltage: 1.5V
- Working current: 25mA
- Working temperature and humidity: -25～55℃/<85%RH
- Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
keyboard:
- Size: 36.6cmx13.1cmx2.4cm
- Color: pink
- Connection: 2.4G
- Number of keys: 100 keys
- Working voltage: 1.5V
- Working current: 20mA
- Working temperature and humidity: -25～55℃/<85%RH
- Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10
Instructions:
Open the battery cover at the bottom of the keyboard, take out the receiver, insert the receiver into the USB port of the computer, put a AA battery (AA battery) into the battery slot, cover the keyboard battery cover, and then open the battery cover of the mouse to put a battery Insert AA batteries (AA batteries) into the battery slot and then cover the mouse battery cover to use.
Precautions:
- Do not expose the battery to humidity and high temperature, and avoid contact with conductive materials or liquids
- Do not short circuit
- Do not disassemble or attempt to repair this product by yourself.
- If the product does not operate normally, please contact the after-sales department in time to obtain relevant services or maintenance
storage method:
Power off storage, do not expose to humidity, high temperature environment
Receiver information:
- Current: 20mA
- USB interface: Compatible with USB 1.1/2.0/3.0
- Product size: 18.5*14.5*5.5mm
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
