Kogan KAPWBKEYMUA Keyring Charger with Memory User Manual
IIIustration
- USB connector
- Power indicator
- Output connector
- Power switch
- Key chain
Features
- Battery: Li-polymer
- Capacity: 800mAh
- Dimension: 71 x 31 x 12mm
- Weight: 40g
- Input: 5V 500mA (micro); 1A (iPhone)
- Output: 5V 500ma (micro); 1A (iPhone)
- Self-charging timer: 1.6 hours
- Recharge cycles: Full charge > 500 times
- Protection functions: Built-in protection functions for short circuit, overcharge/discharge, over current, stabilized voltage.
- Memory: 8GB
Instructions
- Charging mobiles via Keyring charger : Connect the keyring charger with mobile and hold the power button for 2-5 seconds to charge your phone. Press again to stop charging.
Charging the Keyring charger : Connect the keyring charger to your PC or AC charger. It will get charged automatically while the LED indicator lights up in blue.
Using the Flash drive : Connect the keyring charger with the PC and press the power button once. The indicator light will light up in green, which means the flash drive is on and active. Press again to turn it off.
How to use as a data cable : Connect the keyring charger with both the mobile and PC simultaneously. The mobile will get charged automatically. To get the data mode working, please ensure the flash drive is off. See pic . Note: Please don’t turn the keyring charger on before or after connection, otherwise the data connection will fail.
Charging the Keyring charger : Connect the keyring charger to your PC or AC charger. It will get charged automatically while the LED indicator lights up in blue.
Using the Flash drive : Connect the keyring charger with the PC and press the power button once. The indicator light will light up in green, which means the flash drive is on and active. Press again to turn it off.
How to use as a data cable : Connect the keyring charger with both the mobile and PC simultaneously. The mobile will get charged automatically. To get the data mode working, please ensure the flash drive is off. See pic . Note: Please don’t turn the keyring charger on before or after connection, otherwise the data connection will fail.
Care & Maintenance
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty. Keep the device dry. Rain, humidity and all types of liquids or moisture which contain minerals that will corrode electronic circuits. If the device does get wet, turn it completely
dry. Do not use or store the device in dusty or wet conditions that may damage or destroy the internal electronic components. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and/or warp and melt the casing. Do not store the device in cold areas. When the device temperature rises back to a normal temperature, moisture and condensation can form inside the casing, damaging the circuit board. Do not drop, knock or shake the device. Rough handling can break its sophisticated structure. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the equipment. If the product does not work, contact the Kogan customer support team for further assistance.
DOWNLOAD PDF
Kogan KAPWBKEYMUA Keyring Charger with Memory User Manual
