Kogan KAHTP22AUTA 2000W Smart Electric Panel Heater Guide
BEFORE USE
Read and follow all the instructions in this manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product. Retain in the event that warranty service is required. NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading tests. Normal use, or the use of other recommended attachments, may draw significantly less power.
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should always be followed. WARNING-to reduce the risk of fire, electrical shock, or injury to persons or property:
- Read all instructions before using this appliance and keep them for future reference.
- Use only the voltage specified on the rating plate of the heater.
- Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the appliance may overheat and become a fire risk.
- Do not cover grilles, block entry, or exhaust airflow by placing the appliance against any surface. Keep all objects at least 1 meter from the front, side, and rear of the appliance.
- Do not place the appliance close to a radiant heat source.
- Do not operate in areas where gasoline, paint, or other flammable liquids are used or stored.
- This appliance heats up when in use. To avoid burns, do not let bare skin touch a hot surface. Switch off and let cool before moving.
- Do not use the appliance to dry clothes.
- Do not insert or allow foreign object or metal utensils to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.
- Do not immerse in liquid or allow it to run into the interior of the appliance, as this could create an electrical shock hazard.
- Do not reach for an appliance that has fallen into the water. Switch off at supply and unplug it immediately.
- Do not operate any appliance with a damaged cord, or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Return to the Kogan customer service team for examination, electrical or mechanical adjustment, service, or repair.
Overview of the appliance
Specifications:
- Rated Power: 2000W/1000W
- Rated Voltage: 240V 50Hz
- Dimensions (mm): 830*75*400
Guide to the control panel
Control panel
- Power On/Off button
- Mechanical/automatic mode choose
- Mechanical/automatic mode timer setting.
- Confirm button
- Downwards adjustment
- Upwards adjustment
- High/low power selected
- Power indicator light
- Day
- The heating element working indicator light
- Low power
- High power
- Negative ion indicator – (This model has no negative ion function)
- Mechanical control
- Automatic control
- Timer
- Hours display
- Minutes display
- Real-time temperature display
- Temperature unit display ( C)
Operation Guide
Power on/off
Plug in the unit and you will hear a short buzz, then the red power indicator “8” will always light up. The LCD display will light up for 12 seconds and then turn off. Press “1” (Power) to turn on the device with a short buzz. The day, time, room temperature, and temperature unit will be displayed. One of the power settings (“HI” or “” LO”) and the model (“M” or “A”) will be on. The setting temperature is factory set at 24. The memory is ℃ held in the event of power interruption.
Temperature setting (mechanical mode is the same as the automatic mode):
temperature units are measured in. ℃ When the device is powered on, press “5” or “6” and the temperature will flash, then press “6” or “5” again to set the desired temperature. The highest setting temperature is 30 and the lowest temperature is 5. Press ℃ ℃ “4” to finish the temperature setting, or the system will return to the operation state without operation in 5S. When the newly set temperature stops flashing the room temperature will show on the LCD screen.
Time setting
When using the device for the first time, the time on screen may not be the same as the actual time, so please adjust the right date and time (mechanical model and automatic mode would be the same). Day: When the device power is on, press the “3” and “4” at the same time for 3 seconds, the day “9” will flash. Press “5” or “6” to choose the right day and press “3” to finish. ”9” will stop flashing. Hour:
After setting the right day, the hour “17” will flash. Press “6” or “5” to set the right hour and press “3” to finish. “17” will stop flashing. Minute: After setting the right hour, the minute “18” will flash. Press “6” or “5” to set the right minute and press “3” to finish. “18” will stop flashing. Second: After setting the right minute, the second “19” will flash. Press “6” or “5” to set the right second and press “3” to finish. “19” will stop flashing. –After setting the right second, press the button “3” again or “4” to finish the time setting. All time symbols will stop flashing.
To set the running time in one week:
There are two ways to set the running time in one week: After you have set the first day, you can press “4” for 3 seconds to copy and save the data to the following days, or after you have set the first day and confirm, you can press “4” for 3 seconds (within 12 seconds) to copy the data to the following days. Please notice that the data can only copy for the following days, (eg, when you are setting the
Wednesday running time and press “4” for 3 seconds, Thursday to Sunday would be in the same running time, but Monday and Tuesday could not copy the data.) After you have set the first day, it can go onto the following day’s setting, you can set the different running times according to method ②. ④ After setting the running program: Press “4” to save and the heater will operate in accordance with those on and off times.
If not currently within the running time, the device will turn off after 10 seconds. Mechanical “M” mode timer setting (the timer is just for the current day) Press “2” select the mechanical mode and the LCD will display “M”. Press “3” to set the timer, and “17” will flash, press:’6” or “5” to adjust the hour, then press “3” again to set the minute. Press “4” to confirm the timer and “16” will light up. If you press “3” when setting the minute that means.
Electronic locking
When the device power is on, pressing buttons “+” and “-” at the same time for 3 seconds will lock all function controls, which will be displayed on “19” as a square for 5 seconds, and then change to real temperature display. If any button is pressed, the display will show the square for 5 seconds with no buzzing sound, then change to the real temperature display. Methods to unlock: ① Cut off the electric supply to the device ② Press “+”and “-” at the same time for 3 seconds,
Safety feature
The unit is equipped with a high-temperature limit switch, and the heater will automatically shut off if it is in an over-heating condition. The heater will automatically come back on when it has cooled down.
User tips
CLEANING INSTRUCTIONS:
Always ensure the heater is clean behind. Press down the two top catches “P” (please refer to the diagram below) on the back of the heater to pull the heater forward. After cleaning the heater you must return to the fixed in the normal position. The heater requires regular cleaning to ensure trouble-free operation:
- Unplug the heater from the main supply before cleaning.
- Ensure that the heater has been allowed to cool down completely before cleaning.
- Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
- Use a vacuum cleaner to remove dust and fluff from around the grilles.
- Ensure the heater is dry before plugging back into the mains supply.
Storage:
If you do not plan to use the heater for extended periods of time, it is recommended that the heater is cleaned and then stored (preferably in its original packaging) in a cool dry place.
WALL MOUNTING GUIDE
REFERENCE LINK
https://assets.kogan.com/files/usermanuals/KAHTP22AUTA-A.pdf
