Lasko BD-76P 150 PPD Commercial Dehumidifier User Manual

Lasko BD-76P 150 PPD Commercial Dehumidifier User Manual

GENERAL INFORMATION
Packaging Please

DO NOT dispose of any packaging until you have checked the appliance is operational. After removing the packaging ensure the contents are intact and complete. In the unlikely event of missing parts; contact your retailer. DO NOT leave children unattended with any of the packaging since it is a potential source of danger.

Disposal of all packaging must be carried out responsibly & safely and in accordance with your local authority regulations. ALWAYS recycle the packaging material where possible. When using any electrically powered product, basic safety precautions should always be followed. PLEASE READ THE INSTRUCTIONS CAREFULLY AND IN FULL BEFORE USING THE PRODUCT.

IMPORTANT INSTRUCTIONS

WARNING – to reduce the risk of fire, electrical shock, or injury to persons or property:

1. Always operate the product from a power source of the same voltage, frequency, and rating as indicated on the product identification plate.
2. Close supervision is necessary when any product is used by or near children the elderly or the infirm.
3. Do not allow children to use the appliance as a toy. Do not operate this product with a damaged power cord plug. If the supply cord is damaged it must be replaced by qualified personnel or other similar qualified persons in order to avoid hazard.
4. To reduce the risk of electric shock, do not expose the unit or flexible cord to moisture of any kind.
5. Switch off and unplug from the power socket when not in use, before assembling, or before cleaning.
6. Do not place objects on the product or allow objects to obstruct the inlet or outlet openings, or operate in close proximity to walls or curtains, etc.
7. The use of attachments or accessories not recommended or sold by the product distributor may cause injury to persons or damage to property.
8. This product is intended for normal light commercial use only.
9. Do not attempt to dismantle the appliance.
10. Do not operate the appliance on a metal surface.
11. Do not use the appliance in artificially hot or humid conditions or allow it to be used in a hazardous environment.
12. Do not clean the appliance with an organic solvent.

PRODUCT IDENTIFICATION

1. Metal Handle
2. Control Panel
3. Wheels
4. Water pipe bracket
5. Air Outlet Grille
6. Air Inlet Grille
7. Power Cord
8. Water Pipe

SETTING UP INSTRUCTIONS

IMPORTANT
Place the dehumidifier in the upright position. When transporting a dehumidifier to the site, allow the dehumidifier to stand for 30 minutes before switching ON. This is necessary to allow the refrigerant system to stabilize and avoid system damage.

SETTING UP THE DEHUMIDIFIER:
Operate the dehumidifier in an enclosed area, as this creates a drying chamber. Close all doors, windows, or areas that open to external areas, to maximize the dehumidifier’s water removal efficiency. Keep traffic through the drying chamber to a minimum. Place the dehumidifier in the center of the room away from walls and furnishings. DO NOT allow the airflows to be obstructed.

DRAINAGE:
The dehumidifier pump connects to a plastic drainage hose. The hose is stored on the back of the appliance. Uncoil the entire hose ensuring there are no kinks or restrictions and place the unattached end into a water vessel or run outdoors. Ensure that water that runs outdoors does NOT create a slip hazard. Water vessels MUST be checked regularly where used.

CONTROL PANEL

1. ON/OFF Key
2. UP AND DOWN Key
3. Purging Indicator
4. Defrosting Indicator
5. PURGE Key
6. HUMIDITY AND TIME Display
7. TIME Key
8. Operating Indicator

• TIME: Display working hours and totally working time After turning on the operation, it can display setting humidity(left) and current humidity(right), and humidity could be changed by pressing “Up and Down”. for the current time, and the time unit is based on minutes, for example, if it displays “0000:50”, it means that it has worked for 50 minutes this time. If you want to view the totally working time, please press “T” once more, and it will show for 10s and return automatically to the original working hours. If you press “T” before it has lasted for 10s, it also can turn to the original working hours. If the unit is in power but not in operation, LED will display nothing, and in this condition, the working hours at the last time will be shown for 10s if “T” is pressed one time. But within 10s, if “T” is pressed again, the totally working time will be shown for also 10s, and within 10s, if there is no action, LED will automatically turn down. In addition, if “T” is pressed again when the LED displays the totally working time, the LED will turn down immediately. What’s more, the current working time will be deleted by pressing “T” for 5s continuously, and the time will be recounted, but the deleted time will be added to the totally working time.

OPERATING INSTRUCTIONS.

A, Operation for general use:

1. Press the ON/OFF key to turn the unit on it will get into working mode automatically.
2. After using, press ON/OFF key to turn the unit off, while the water pump will turn on automatically for 40 seconds to drain the rest water, and turn off automatically.
3. key lock function If the keys of ‘T” and “purge” are pressed for 2s at the same time, the defrost light will keep shining, and all the keys on the control panel will be in the lock, but they can be unlocked by the same action again.
4. Pipe function As to a much wetter space, use a plastic pipe with a diameter larger than 6.7in and tie the pipe to the hood, it will be much faster and more effective to make it dry.

Attention:
DO NOT switch the power OFF by disconnecting at the main socket outlet. To avoid water spillage; DO NOT move the dehumidifier for at least three minutes after turning the power OFF.

Maintenance

CLEANING THE AIR FILTER
Ensure the dehumidifier is turned OFF and the plug is removed from the power socket before maintenance is carried out. The working performance of the dehumidifier will be greatly reduced if the filters become blocked

1. Remove the filter as shown in the diagram above.
2. Vacuum any debris from the filter using the vacuum hose and nozzle attachment.
3. Using lukewarm water and a mild detergent wash the filter and allow it to dry.
4. Once dry, re-install the filter into the dehumidifier.

REPLACING THE BATTERY

1. Remove the screws in the four corners of the control panel.
2. Once the screws are removed, carefully lift the control panel to access the PCB.
3. On the PCB is a 6F22 9V battery. Remove the battery and replace it with a new one.
4. Refit the control panel onto the PCB.
5. Refit the four screws.

BLUEDRI’S WARRANTY POLICY

1-Year Coverage Subject to the conditions stated below, BLUEDRI offers a limited warranty on parts and labor on the following equipment, parts, and accessories to be free from defects in material and workmanship for a period of one year to the original purchaser. 10-Year Coverage Subject to the conditions stated below, BLUEDRI warrants parts and labor on rotationally molded polyethylene tanks/housings and injection molded vacuum head assemblies to be free from defects in materials and workmanship for a period often years to the original purchaser.

Continued

Wear items exempt from warranty consideration include but may not be limited to power cords, transport wheels, castors, handle grips, filters, screens, brushes, and carbon brushes. Subject to the conditions and exceptions stated in this warranty, BLUEDRI warrants the BLUEDRI products to be free from defects in material and workmanship, under normal use and service, for the periods listed under the warranty policy to the original purchaser. At any time during the warranty period, BLUEDRI will furnish replacement parts for the BLUEDRI products to the original purchaser.

Such parts will be furnished and charged including transportation costs, to the original owner. If the original part is returned within the warranty policy period from the date of delivery for inspection by BLUEDRI and is found to be defective, the owner will be credited for the cost of replacement parts plus shipping and handling. Replacement parts that have become defective through wear or abuse are not included in this warranty. This warranty does not apply to damage or defect caused by accident, misuse, negligence, fire, or to any

BLUEDRI product that has been serviced or repaired by other than an authorized BLUEDRI Service Distributor or BLUEDRI factory personnel. This warranty is void if products are used for any purpose other than that which was intended. There are no other warranties expressed or implied. In no event shall BLUEDRI be liable for incidental or consequential damages or any damage to a person or property. (Please note some states do not allow the exclusion or limitations for incidental and consequential damages.)

REFERENCE LINK

DOWNLOAD LINK

Lasko BD-76P 150 PPD Commercial Dehumidifier User Manual