LASKO Ultrasonic Digital Humidifier User Manual
PRODUCT SPECIFICATIONS AND PARTS
SPECIFICATIONS
Model Number: H3010
Humidifying Mode: Combination
Power Supply: AC120V, 60Hz
Power Consumption: 140W (40W at cool humidification)
Humidity Capacity: About 350 cc/hr. (at highest setting and warm humidification)
Tank Capacity: 1.4 gallons
Successive Humidity Hours: Up to approximately 72-hours depending on environmental conditions
Dimensions: Width 14.5 inches – Height 12 inches – Depth 9 inches
Weight: 8.8 pounds (not including packaging)
CONTROL PANEL BUTTON FUNCTIONS
Night Light/Lamp
provides a soft ring of blue light with ON/OFF switch.
Select/Set
Change between programming mode and normal mode.
Hour
Select the hour for timer start/off or clock (actual time).
Minute
Select the minute for timer start/ off or clock (actual time).
Power
Turns humidifier on/off for normal usage and programming mode.
Warm or Cool Mist Selection
Select humidifying temperature based on need. Warm humidity will use more power but will humidify your room quicker.
Spray Control
Adjusts spray between low, medium, high and turbo.
Display On/Off
Turns off display lights.
Water Shortage Indicator
When the unit is low on water the Refill LED on the front panel will light up, and the unit will shut off. Simply add more water to continue use.
ADDITIONAL FEATURES
Silver Clean Technology
Unlike other humidifiers that grow slimy mold and mildew, the pureguardianTM ultrasonic humidifier uses
Silver Clean technology embedded in the tank to fight the growth of mildew and mold on the surface of
the water tank.
Silent Operation
Uses ultrasonic technology for quiet operation while you sleep.
WARNINGS
This product should be used only in accordance with the specifications outlined in this manual. Usage other than what has been specified here may result in serious injury.
- Disassembly, repair or remodeling by an unauthorized person may result in serious harm.
- Do not use if plug is damaged or loose.
- Keep this product out of the reach of children and away from pets.
- Be careful not to put water in the humidity spout.
- Before filling or cleaning the unit, make sure it is unplugged.
- Once the humidifier has been turned on, do not move it.
- Do not move when in operation.
- Do not remove the water tank from the unit while it is on.
- Do not handle the adapter plug with wet hands.
- Do not excessively bend, twist or pull the power cord.
- Avoid placing this product where the humidity is pointed directly at an electrical object.
- Do not directly inhale the humidity.
- Do not place this product on a sloped or unstable surface.
- When not in use, unplug the unit.
- Do not fill the water tank with hot or boiling water.
- Do not use this product in direct sunlight, or near a gas stove or heater.
- Do not use if the water tank becomes cracked or damaged.
- Do not keep this product running for an extended period of time.
- Do not clean the unit or water tank with detergents or chemicals of any kind.
- Do not use this product near any other electronic device.
- Do not cover the humidity opening at any time during use.
- Do not use this product near a sink.
- Do not drink water from the water tank.
- Do not place this product on an absorbent surface (ie carpet, towels, blankets, etc).
- Do not pour anything but water into the water tank.
- Children cannot recognize the hazards associated with the usage of electrical appliances. For this reason, always supervise children when they are near the humidifier.
- If the mist comes in contact with the floor prior to evaporating, the floor surface may be damaged. We do not accept any liability for damage in the case of the unit being placed incorrectly.
- The use of water additives, such as ethereal/essential oils, fragrances, eucalyptus, water conditioners, etc will damage the appliance materials and as a consequence the whole unit. Any use of such additives will void the manufacturer’s warranty.
- IMPORTANT: Neither humans nor animals can hear the high frequency vibrations. Failure to comply with the warnings listed above may result in electric shock or serious injury.
WARNING: DO NOT BLOCK ANY AIR VENTS LOCATED ON BOTTOM AND/OR SIDE OF UNIT.
DIRECTIONS FOR USE
Make sure the unit is unplugged.
- Separate the tank from the body of the unit.
- Open the tank lid, turning it to the left.
- Pour cool, clean water directly into the tank. Do not pour anything but water into the water tank.
- Close the tank lid, turning it to the right.
- Attach the tank to the body of the unit.
DIRECTIONS FOR USE IN NORMAL MODE (NO TIMER)
- Power Button
Before turning on make sure there is water in the unit. Press the Power Button.
- Warm or Cool Mist Button
Press to select warm or cool mist. Water temperature is maintained at room temperature for cool setting and 80 degrees for warm.
- Spray Control Button
When you press the Spray Control Button there are four options to choose from: Press once for WEAK Press twice for MIDDLE Press three times for STRONG Press four times for TURBO *You will notice the lights get higher as the spray increases.
- Light Options – Display Button
Press the Display Button to turn the display lights ON or OFF.
- Light Options – Night Light Feature
Press the Lamp Button at the top of the unit to illuminate the night light feature.
- Water Refill Button
When the Water Refill Button lights up it is time to refill the water tank.
DIRECTIONS FOR USE IN PROGRAMMABLE MODE
The programmable mode allows you to set the timer to turn the humidifier both on/off at a daily predetermined time. This mode also allows the clock to be programmed.
FIRST TURN POWER BUTTON ON.
Program Start
- Push Select/Set Button until “START” is blinking on display.
- While “START” is blinking, select the desired start time using Hour and Minute buttons (AM or PM as indicated).
- Select Cool/Warm preference.
- Select Spray Control preference.
- “START” indicator will remain lit once programmed.
Program Stop
- Push Select/Set Button until “STOP” is blinking on display.
- While “STOP” is blinking, select the desired end time using Hour and Minute buttons (AM or PM as indicated).
- “STOP” indicator will remain lit once programmed.
- To cancel program, press and hold select/set button for two seconds (START and STOP buttons will not be lit).
Clock Set
- Clock must be set in order for timer to work properly.
- Push Select/Set Button until “TIME” is blinking on display.
- Select actual time using Hour and Minute Buttons (AM or PM as indicated).
MAINTENANCE
- Always unplug the unit before servicing it in any way.
- The temperature of the water remaining in the unit after use may be HIGH.
- Do not submerse the unit in water, or allow water to enter anywhere on the unit except the designated water tank.
INSIDE THE BODY OF THE UNIT
Pour excess water out of the unit, but do not allow it to enter the hole where the water vapor comes out. Wash out the unit with fresh water, using the cleaning brush and a soft cloth as needed.
OUTER SURFACE OF THE UNIT
Wipe the surface of the unit with a soft, damp cloth if needed.
WATER TANK
If water spots remain in the water tank, wipe the inside with a soft cloth. DO NOT use soap or detergents.
AIR FILTER
Gently wipe away debris from the filter with a soft cloth. This filter does NOT need to be replaced.
ULTRASONIC DISK
Remove spray spout (Fig. 1) and use the enclosed cleaning brush to regularly remove build up and deposits from this area (Fig. 2). Diluted vinegar will help to prevent this build up.
STORAGE
- Fully dry the inside and outside of the unit before storing it.
- DO NOT leave water in the unit.
- Store in a cool, dry place.
TROUBLESHOOTING GUIDE
DOWNLOAD PDF Link
