Airthereal LF500M AROMA DIFFUSER User Manual
SAFETY PRECAUTIONS
- When the room temperature is below 32°F / 0°C, please empty the water tank. If the water is allowed to turn to ice it can damage the components.
- Please use purified or distilled water so that your atomizer will not be damaged due to impurities in the water. If you use normal tap water you may notice a white buildup of calcium or lime in the diffuser.
- The maximum water volume is 16.9 oz/500 ml. Exceeding the max capacity line will affect the atomization effect or cause water leakage and damage to the machine.
- Do not let water splash into the base to avoid damaging the internal parts.
- After use, you must pour out the remaining water in the water tank to prevent damage to the atomizer. Do not leave water sitting in the tank for several days without use.
- When cleaning or adding water to the device, always remove the AC adaptor from the outlet. Do not insert or remove the AC adaptor with wet hands. Doing so may cause electric shock or injury.
- Do not replace the power cord without authorization.
- In case of abnormality, do not attempt to disassemble or repair the device by yourself. Doing so could cause fire, electric shock, injury, or malfunction. Please stop operation and send an email to support for help.
PARTS
Note:
The accessories in the package are exclusively used for the product. The appearance and quantity may be different for different batches. Please contact support if you have any questions.
SPECIFICATIONS
Model | LF500M |
Rated Voltage | DC 24V 1.5A |
Rated power | 12W |
Water Tank Capacity | 500 ml / 16.9 oz |
Mist Output | 35 – 65 ml/hr |
Timer Setting | 1 – 8 hours |
Weight | 2.0 lbs |
Dimensions | 9.4 x 3.9 x 6.3 in |
OPERATION
- Remove the top cover.
- Add water to the max fill line. Add 2-5 drops of scented essential oil directly to the tank if you wish.
Note:
- The maximum water volume is 16.9 oz/500 ml. Exceeding the max capacity line will affect the atomization effect or cause water leakage and damage to the machine.
- Please use purified or distilled water so that your atomizer will not be damaged due to impurities in the water. If you use normal tap water you may notice a white buildup of calcium or lime in the diffuser. While not harmful, these deposits may cause a white powder to form when the mist dries or inside the machine. These deposits can be cleaned with distilled white vinegar.
CONTROL
Function selection
function selection | |
Switch | Power on / Power off |
Timer | 1-8 hours |
Light brightness | 1: Low 2: Medium 3: High |
Lighting effect | • Full light • Breathing light • Flashing light |
Mist level | 1: Low (soft flame effect) 2: High (violent flame effect) Lights out (sleep mode) |
Low water icon | The unit automatically powers off |
Notes:
- After powering on, there will be a beep sound
- There will be a beep each time you press a button.
- When there is no water in the tank you will hear 2 beeps over 5 seconds and the diffuser will automatically power down. The low water icon will also illuminate
- When the timer is up you will hear a long beep sound before the diffuser automatically shuts down.
CLEANING INSTRUCTIONS
- Drain the water remaining in the water tank. Ensure the air outlet side is facing up during draining to avoid moisture getting inside the unit.
- Do not use any benzene, paint thinner, alcohol, or other types of chemicals during cleaning. Doing so may cause damage to the machinery.
- If using detergent, always use mild kitchen detergent. Chlorine, acid, and enzyme-type detergents remaining inside pose the danger of emitting noxious gasses. Distilled white vinegar is recommended for cleaning.
- If you do not intend to use the product for an extended period of time, clean it and dry it thoroughly before storage.
TROUBLESHOOTING
Symptom | Possible Causes | Approach |
The power-on indicator does not light up and the diffuser cannot be started | No power | Reconnect the power adapter and try again |
The indicator light is on, but there is no mist produced | If the water tank is short of water or has too little water, the low water icon will illuminate | Add purified water to the tank |
Too much water | Pour water lower than the max capacity line. Exceeding the max capacity line will affect the atomization effect | |
The humidifier emits a weird smell |
| Remove the lid of the water tank and place it in a cool place for more than 12 hours to ventilate. Clean the water tank with white vinegar and refill with pure water |
Too little mist produced | Clean the water tank and add pure water | |
Too much water | Pour water lower than the max capacity line. Exceeding the max capacity line will affect the atomization effect | |
The diffuser is too noisy | Too little water | Add water to the tank |
If the above methods cannot be improved, please consult the customer service hotline for assistance |
LIMITED WARRANTY
We provide a 1-year warranty. For more information please visit www.airthereal.com/warranty.
- What’s covered? Defects due to faulty materials and/or workmanship of the product.
- What’s not covered?
- Damage caused by the owner when attempting to fix or alter the product by himself or herself.
- Damage caused by misuse, abuse, neglect, alterations, or unauthorized repair.
- Natural depreciation.
- Warranty Period Warranty becomes effective from the date of original purchase and will last for 1 year.
- Who’s covered? This limited warranty is only effective for the original purchaser, it is non-transferable.
- How to request warranty services? To obtain the benefit of this warranty, please email support@airthereal.com. Our customer service will address your issue as soon as possible!
Always here to help you
www.airthereal.com
Produced for: West Ryder Technology LLC
2330 Paseo Del Prado STE C304 Las Vegas, NV 89102 USA