Soundcore Life P3 Headphone User Manual
Charging
- Fully dry off the earbuds and the USB port be fore charging.
- Use a certified USB-C charging cable and charger to prevent any damage.
- Fully charge both the earbuds and the charging case before the first use.
- Place the earbuds in the charging case and close it.
- Connect the charging case to the power supply by using a USB-C charging cable. Alternatively, position the charging case at the center of your wireless charger for wire less charging.
- The LED indicators on the charging case indicate the charging status.
Wearing
- Choose the Ear Tips that fit you rears best.
- Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.
- Your earbuds come with multiple pairs of Ear Tips, among which Medium-sized are pre-installed
Powering On/Off
- Open the charging case, the earbuds will automatically power on. To power off, place the earbuds in the charging case and close it.
- The earbuds will automatically power off after 30minutes if no device is connected.
Bluetooth Pairing
- Open the charging case, the earbuds will automatically enter the Bluetooth pairing mode.
- The 3 LED indicators on the charging case will flash white in sequence continuously.
- Select“SoundcoreLifeP3” on your device’s Bluetooth list to connect. When successfully connected, the LED indicators on the charging case will turn white for3 seconds.
- Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
- Each time you power on your Sound core earbuds, they will automatically connect to your last successfully connected device if available with in the Bluetooth range.
- Mono mode: When Bluetooth connected, you can use either on e of the earbuds only by placing the other one into the charging case.
- When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
- When you are on a call, place either one of the earbuds in to the charging case, and the microphone in the other earbud will be activated.
Controls
Sound core App
Download the Sound core app to enhance your experience.
User interface customization: In stereo mode, all of the controls(e.g. adjust volume, control playback, activate Siri) can be customized in the app.
EQ settings: There are more than 20 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
Noise cancellation: Choose an active noise cancellation mode to reduce ambient noise according to your surroundings.
- Transport: Target slow-end frequencies like engine and road noise for peaceful journeys and commutes.
- Outdoor: Reduces ambient sounds in cities for less distractions.
- Indoor: Reduces voices and mid-frequency noise from coffee shops and other inside spaces.
Earbuds firm ware upgrade: You will be informed once the new version of firm ware is detected when you connect the earbuds with the app. Ensure the earbuds are placed in the charging case and the case remains open until the firm ware upgrade is completed. During the upgrade, ensure the earbuds are being charged and avoid any operation.
Reset
You might need to reset the earbuds if you experience any connectivity problems or function issues.
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the case for 10 seconds until the 3LED indicators flash white for 3 times and then flash white in sequence continuously. This confirms that the reset was successful and your earbuds can be connected normally.
Specifications
- Specifications are subject to change with out notice.
DOWNLOAD PDF
Homedics Soundcore Life P3 Headphone User Manual
