Monster Light Up Reindeer Gold Stag Instruction Manual
SPECIFICATION
PRODUCT DESCRIPTION
The Monster Light Up Stag is a flat pack, easy to assemble, light up reindeer ready to bring you Christmas cheer! Our gift to you is a special timer to help you save money and the planet!
PRODUCT SPECIFICS
LED Colour: Ice White (24000k)
24v Plug in transformer
8m clear wire
IP44 Indoor & outdoor use
Metal frame coated in weatherproof white paint
Metal pegs (included secure figure into ground)
DIMENSIONS
H 110cm x W 70cm x D 19cm
PARTS LIST
When first unpacking your reindeer, check each part against this list to ensure that they are all present. If any are missing contact us before attempting to assemble.
- Reindeer with attached legs (4x) & Tail
- Leg Bars (2x)
- Wing bolt (4x)
- Pegs (6x)
- Cable ties 8cm (50x) Approx.
- Cable ties 12cm (x25) Approx.
- UK Timer Plug. (x1)
- EU Timer Plug. (x1)
PRODUCT FEATURES
- IP44 Indoor and Outdoor use
- UK & EU timer plug
- Ice white 24000k LEDs
SAFE WORKING PRACTICE
Please read through the Safe Working Practice to ensure prevention of injury or damage to the device.
Please ensure the plug and controller (if fitted) is plugged into the mains power supply indoors. Unless if connected to a moisture protected power outlet. Do not immerse the product in water. Do not use in damp conditions. Do not connect electrically to other light sets. The cable on this light set cannot be replaced, if it is damaged – then dispose of this LED set. Turn this product off if it starts to produce excess heat. Do not connect this set to the electrical supply while in its packaging. This product may contain glass handle with care. This set is fitted with non-replaceable bulbs. Do not attempt to repair the product yourself, repairs should be carried out by a qualified technician.
ASSEMBLY INSTRUCTIONS
- Remove packaging, check all parts are present.
- Attach connected legs to adjacent mounting points. Line up Hole in underside and screw in wing bolt (C) ensuring they are finger tight repeat for each leg.
- Insert tail, male part into corresponding female part. (friction fit)
- Attach Head, 4 male parts in the base of the head should fit with corresponding female parts in the body. (friction fit)
- If required, use cable ties to tidy/ arrange cabeling.
- Attach power cable to UK or EU timer plug. (G) or (H)
- Plug in.
- To set timer press the white button on the plug.
- First press, green light on. lights are set ON
- Second press, green light off. Timer is set (6 Hours ON then 18 Hours OFF)
- Third press, green light off. Lights are OFF
- Forth press returns to start.
TROUBLESHOOTING
WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?
If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.
DOWNLOAD PDF LINK
https://manuals.plus/m/e1268a9b4dc73f33329df8c7fd4a6cfa5ab5f12977d38cd9fb3748132b2a36ce_optim.pdf
https://www.monstershop.co.uk/large-light-up-stag-doe-reindeer-set
