Table of contents
show
Corsair LL120 RGB Performance Fan Lighting Modes
Congratulations
The CORSAIR LL RGB series of fans give you high performance and individually customizable RGB LED lighting in one package. Personalize your system lighting and tailor your performance with PWM control.
Installation
- Connection Notes
- Connect the fans in sequential order from 1 > 2 > 3 > 4 > 5 > 6.
- Animations begin with fan 1 and proceed through fan 6.
- Any fan not connected in series will break communication and the RGB LED lighting function will not work.
- Mount the fan(s) to the location of your choice in the chassis.
- Find a location for the RGB LED hub that allows connection for all the fans RGB LED cables installed in your system to reach the hub.
- The CORSAIR Lighting Node PRO will also need to be plugged into the RGB LED hub for CORSAIR iCUE software control of the RGB
- LED lighting.
- Mount the RGB LED hub with the provided mounting strips.
Lighting Node PRO Installation
- Turn your system off prior to installing your Lighting Node PRO.
- Find a location for the Lighting Node PRO that allows the cable to reach the RGB LED hub.
- Mount the Lighting Node PRO with the provided mounting strip.
- Plug the mini USB cable into the back of the Lighting Node PRO then plug the 9-pin end into an available internal USB 2.0 header in your system.
- Connect the SATA power connector to any available SATA connector from your system power supply.
LED Hub Installation
- Plug the RGB LED cable into an available LED header on the Lighting Node PRO to connect the LED hub.
- Connect the SATA power connector to any available SATA connector from your system power supply
Download CORSAIR iCUE
- For the full CORSAIR iCUE experience, please download our latest CORSAIR iCUE software at www.corsair.com/downloads.
An internet connection is required for software download. CORSAIR iCUE is required for lighting control.
Download Link