LTC AG-202 RGB Computer Speakers, Bluetooth User Manual

LTC AG-202 RGB Computer Speakers, Bluetooth User Manual

PERFORMANCE

• External wire controller, easy to use and quick to operate.
• Built-in high-efficiency digital power amplifier and DSP audio processing.
• GB multi-color atmosphere light circle, DJ music signal detection.
• Support multi-source mode Bluetooth, AUX, USB sound card, and headphone output function.
• With two 2.25-inch full-frequency drive speakers, the sound is pure and beautiful, and the sound effect is shocking.

NOTES

• Do not place the system in a high-temp and humid environment, prevent it from raining or rough handling and strong shock.
• In order to avoid electric shock and other accidents, do not open the back panel cover for repair without professional guidance.
• In case fragments or other liquids are accidentally sprinkled inside the cabinet, please switch off the power immediately.
• In case of repair, Please come to the professional maintenance for help.
• Switch off the power and take off the plug from the power jack when the system is not working.
• Keep it safe from water drops or splashing water, and no liquid container is allowed to be put on its top side.
• Keep the cabinet vent far from the wall by 20mm at least and the air vent should not be blocked.
• RF exposure information:
• The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of 20cm between the device and the human body.
• To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and the human body.

INSTRUCTIONS

OPERATING INSTRUCTIONS

1. Connect to the power supply connected to the computer or the 5V USB output port of the power adapter, the speaker will automatically turn on after the power is turned on.
2. Source
   a. Long press the Source key to switch the audio source mode: Bluetooth, USB sound card, and AUX audio input.
   b. In USB sound card and Bluetooth mode, short press to play and pause music.
3. Pair/Lighting
   a. At the Bluetooth mode, long press to enter the Bluetooth pairing state, and the blue indicator light flashes slowly.
   b. Light control, short press to adjust the light mode, respectively. DJ light mode-> seven color breathing->Red breath ->Green breath->Blue breath-> Light off.
4. USB Play
   a. Connect the USB cable to the computer.
   b. The speaker automatically turns on and switches to the USB sound card mode, and the red indicator lights up.
   Reminder:
   Users need to arrange driver software for which versions are below Windows 10.
5. Bluetooth mode
   a. Long press the Source button, and the blue indicator light flashes slowly, waiting for pairing.
   b. Use the Bluetooth of your mobile phone to search and connect to “AG-202” If the device prompts for a password, please enter “0000”.
   c. The indicator light is always on after the connection is successful.
6. AUX mode
   a. Long press the Source button to switch, and the indicator light flashes slowly in red and blue, that is, the AUX source is ready to be connected.
   b. It can be connected with mp3, mobile phone, computer, etc. Connect to the AUX interface on the wire controller through the signal cable.
   C. After the AUX signal cable is connected to the Audio, the indicator light will be steady red and blue.

PACKAGE CONTENTS

• Speakers 1pc
• User manual 1pc

SPECIFICATIONS

• Product model: AG-202
• 2.0 Computer Multimedia Speaker
• Output Power/RMS: 6W3Wx2)
• S/N ratio: 275dB
• Separation: 240dB
• Frequency response: 20Hz-20KHZ
• Power Input: 5V… 14
• Product size: 116(WIx114(DIx107 (H)mm

POWER

This product uses DC SV = 1A power supply.

1. Do not install this equipment in a confined or building-in space such as a bookcase or similar unit, and maintain a good ventilation condition. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
2. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on the apparatus.
3. CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
4. The batter (battery or batteries of a battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.
5. Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling
6. Frequency: 2.402GHz-2.48GHz
7. The Max. transmit power: 10 dBm 8. Operation temperature: 0-40°C

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

REFERENCE LINK