Tecknet M009 Ergonomic Gaming Mouse User Manual

Tecknet M009 Ergonomic Gaming Mouse User Manual

Package Contents:

Button Instructions:

1. Right Click Button
2. Scroll Wheel
3. Left Click Button
4. M1 Button
5. M2 Button
6. M3 Button
7. M4 Button
8. M5 Button
9. DPI +Button
10. DPI – Button
11. Weight Tuning Set

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.

Technical Specifications:

Button Count: 10 Buttons
Resolution: 500/1000/2000/4000DPI (250-16400 by software)
Interface: USB version 2.0
Operating Voltage: 4.75V
Operating Current: ≤120mA
Cable Length: 1.8m
LED Color: Red, Blue, Green, Cyan, Yellow, Pink
LED Brightness: 5 levels adjustable
LED Breath Time: 4-8s adjustable intervals
Macro Settings: 12 macro settings and up to 32 buttons for each one
Support: 6 profile settings

System Requirements:

To use this mouse, your computer must meet the following hardware requirements and run one of the operating systems listed below.

Hardware:

• PC with a Pentium processor or equivalent AMD processors
• USB 2.01

Operation System:

Windows 98/ME/2000/XP/VISTA/Windows7/Windows8/WIN10

Note: The scroll wheel only works under the operating systems listed above. If you use the mouse under a different operating system, the mouse may either not work or lose its enhanced features.

DPI Switch:

The mouse supports 500/1000/2000/4000DPI. To switch to either setting, press the DPI button. The default setting is 1000 DPI. Click the “DPI +” button on the top of the mouse once to  upgrade the DPI, LED indicator would jump to next level. Click the “DPI -” button on the top of the mouse once to downgrade the DPI, LED indicator would drop to previous level.

Software Instructions:

Installation:

• Connect to your PC, insert the disc and double click the software icon, select a language.
• Press “Next Step”.
• Select “Run TeckNet M009 Driver”.
• Double click the software icon after installation is completed.

Button Setting:

Except Left Button must be selected as “Click”, Right Button, Scroll Wheel, Left Title Scroll, Right Title Scroll, DPI+, DPI-, M1, M2, M3, M4, M5 would be defined as: Click, Menu, Universal Scroll, IE Forward, IE Backward, Double Click, CPI Cycle, Multimedia, Hot Key, Windows, Single Key, Combo Key, Macro Key, Button Off, Left Title Scroll, Right Title Scroll.

Parameter Setting:

1. DPI Setting
   There are 4 levels DPI setting, default DPI is 1000, you can adjust the DPI within 250-16400 for each level. After finish the adjustment, click “Save” to save the setting.
2. Lighting Setting
   You can define the Standard, Respiration, and Neon if needed.
3. USB Report Rate
   You can define the Report Rate within125Hz-1000Hz.
4. Mouse Speed
   There are 11 levels speed for user setting.
5. Double Click Speed
   There are 11 levels speed for user setting.
6. Scroll Speed and Angle Snap
   You can define the scroll speed by selecting “The number of rows”(will input the digit directly) or Scroll one screen. Adjust the bar will change the angle snap.

Macro Setting:

TeckNet M009 software supports 12 macro settings. Each macro supports 32 keys.

Note: 32 keys includes key down, key up action.

• See co double click oN acro. 0-0 change tar name. Take “g” for example, input “g” then click “OK” to save it.
• Click “Start Recording” to set up the macro. Input the keys needed and click “Stop Record” to save. Then you can create a new macro or continue to define other settings. You can choose “Record delays between key” and “Loop Times”. Click “OK” to save.
• You can delete macro from the list. Simply select the captioned macro, click “Delete”. Then click “Save” to save the setting.
• After finish macro recording, go to main interface, choose the button needed, click “Macro” and the saved macro would appear. In addition, there are 3 options on the right for user to select. Click “OK” to save and macro for the captioned key is ready for use.

Profile Setting:

TeckNet M009 supports up to 6 profile.

• Click “Config” at the down left corner and click “New” to create new profile. “PROFILE_O” will appear under the Configuration.
• Click “PROFILE_O” to rename the profile. A drop-down menu will appear as below when you right click. You can delete, edit, copy, load or save the profile.
• Load the Profile. Select a profile and right click to active the drop down menu, click “Load” then you can choose the saved profile to load in the software.

Uninstallation:

Open the control panel and click “Procedures and Functions”. Select “TeckNetM009” and double click to uninstall.

Attention:

• Any attempt to disassemble, adjust or repair the mouse may result in exposure and other safety hazards.
• If not used, the mouse will drop into auto-sleeping mode within 3 seconds, press any key or scroll wheel to activate the mouse.
• Do not use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
• The mouse might not work smoothly on some special surfaces, such as smooth, dark or black, reflecting and 3D mouse pads surfaces.
• Please avoid using the mouse on a metal surface. Metals, such as iron, aluminium or copper, shield the radio frequency transmission and may slow down the mouse presenter’s response time or cause the mouse to fail temporarily.

Ergonomic Guidelines

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:

• Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the radio equipment type M009 is in compliance with Directive 2014/53/EU.
• The full text of the EU declaration of conformity is available at the following internet address: http://www.tecknet.co.uk/support

REFRENCE LINK

https://drivers.tecknet.com/download/drivers.html