NULEA M501 Wireless Trackball Mouse User Manual

NULEA M501 Wireless Trackball Mouse User Manual

Product Features

1. Trackball
2. DPI Switch Key
3. Move Backward Key
4. Move Forward Key
5. Scroll Wheel
6. Left Key
7. Right Key
8. Mode Key
9. BT 1/2 Mode
10. 2.4G Mode
11. ON/OFF Button
12. USB Receiver
13. Non-slip Rubber
14. Indicator Light

Specifications

Package Content

• 1 * Wireless Trackball Mouse
• 1 * User Manual
• 1* Type-C Charging Cable

Bluetooth Connection

Windows System(Take Windows 10 as an example)

1. Turn on the mouse.
2. Press the channel switch button to switch to Bluetooth mode.
3. Long press the switch button for 3-5 seconds, the LED light flashes rapidly and the mouse enters Bluetooth pairing mode.
4. Click the “Bluetooth devices” button on the computer.
   
5. Click the “Add or remove Bluetooth devices” button.
   
6. Search the Bluetooth “BT5.0 Mouse / BT3.0 Mouse”, and click the pairing button.
   
7. If the pairing is successful, the LED lights up for 5 seconds and then goes out.

Mac OS System
Please operate the Bluetooth installation steps(1~3) before pairing.

1. Click the “System Preferences” button on the Mac.
   
2. Click the Bluetooth button on the system preference folder.
   
3. Search the Bluetooth “BT5.0 Mouse / BT3.0 Mouse”, and click the Pairing button. If installed completely, the mouse could be used normally.

2.4G Connection

1. Turn on the mouse, shortly press the mode switch button to the USB mode, and the LED flashes slowly.
2. Take out the USB receiver from the bottom of the mouse.
3. Insert the USB receiver into the computer’s USB port. Note: Be sure to sufficiently check the connector orientation and the insertion location. If you feel a strong resistance when inserting the USB connector, check that the shape and orientation of the connector are correct. Using excessive force may damage the connector.
4. The mouse is ready to use.

Mode Switch

Light Indication

• DPI Switching: Red light
• Low Battery: Red light flickers
• Charging: Blue light
• Fully Charged: Blue light turns off

Charging

1. The low battery indicator flashes red. In order not to affect the experience and function of the mouse, please charge in time.
2. The charging indicator will glow blue while the mouse is charging. The indicator light turns off when fully charged.

Note:

1. Please use our included charging cable to charge the mouse.
2. Do not use a fast charger to charge the mouse. Using a high-power adapter to charge the mouse may burn out the mouse’s chip. (Directly use the computer USB port or a 5V charger to charge the mouse).
3. For your best experience, please fully charge the mouse before your first use.
4. The USB cable provided is for charging. It can’t be used as a wired mouse. When the mouse isn’t connected to the computer via 2.4G USB or Bluetooth, it won’t work even if you plug the USB charging cable directly into the computer port.

DPI Mode
There are 5 DPI levels, please press the DPI button to adjust for your preference. When you press the DPI button, the red light flashes once/twice/three times/four times /five times, corresponding to DPI 100-200-400-800-1200. If the maximum DPI still fails to meet the usage requirements, You can also adjust the DPI on your computer.

For Windows: Start Microsoft Mouse and Keyboard Center, select the mouse you are using, click basic settings, locate Sensitivity, and make your changes. For Mac: Open the System Preferences menu, click “Mouse”, and move the slider under “Tracking Speed” to adjust DPI.

Sleep Mode & Wake Up

The Nulea M501 Mouse features an intelligent sleep mode that keeps the mouse working for longer. In wireless connection mode, the M501 mouse enters sleep mode 30 minutes after you last used the mouse. If you need to use the mouse, you need to wake it up by clicking the left or right key (scrolling the trackball or moving the mouse will not wake up the mouse). Note: If clicking the keys doesn’t wake up the mouse, check the following reasons. ·Make sure the battery power of the mouse is sufficient. ·The pairing mode is on the channel that goes with it. ·Bluetooth is working fine on the terminal device. ·If the computer is in a hibernation state, please wake up the computer first and then click the keys to wake up the mouse.

Important Safety Instructions

Please Note: Long-term repetitive use of any keyboard and mouse could cause injury to the user. We recommend users avoid excessive use of this or any keyboard and mouse.

• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
• This product is suitable for moderate climates only.
• The maximum ambient temperature during the use of this product must not exceed 40 degrees.
• Open fame sources, such as candles, must not be placed on this product.
• Only use a dry cloth or brush to clean this product.

FAQS

How to Clean Your Trackball Mouse?
If your trackball mouse cursor is sticking or jumping around on your screen, or it’s just not moving smoothly, you can clean it for better performance. (1) Push the trackball from the bottom of the mouse. (2) Use a humid cloth to clean the trackball, the surface of the inner trackball housing, and the sensor. Then use a cotton swab to clean the dust on three white rollers. Note: Don’t clean the mouse and trackball with alcohol or wet wipes containing alcohol. When you clean near the optical sensor, please wipe it carefully to avoid damaging it.

How to Reprogram Mouse Buttons?

1. All keys are not programmable.
2. Forward/Backward buttons are not compatible with MAC OS

Why do I have to switch the ON/OFF button on the bottom to wake up the mouse every time?
(1) In general, you don’t need to switch the button to reconnect. If the computer is in a hibernation state, please wake up the computer first and then click the keys to wake up the mouse.

Troubleshooting

The mouse pointer suddenly does not work.

1. The mouse may enter Sleep Mode. It will go to sleep when not in use. You need to press the button to wake up. Rolling the trackball will not wake the mouse.
2. The mouse may be out of power. Please check the power. If the power is low, please charge in time.
3. Check whether the MODE switch on the back of the mouse is in the channel you are using.

The mouse cannot be charged.

1. Please use our standard charging cable to charge the mouse.
2. Please do not use a Type C-C cable to charge your mouse.
3. Use the output 5V charger or directly use the computer’s USB port to charge the mouse. Do not use the fast charger to charge the mouse.

The Bluetooth cannot be connected, and the device is delayed.

1. A low battery will affect the Bluetooth performance of the mouse. Check whether the mouse has sufficient power.
2. Check whether the MODE switch on the back of the mouse is in the channel you are using. The mouse can connect up to three devices, and one channel can only correspond to one device.
3. Avoid signal interference from other sources, such as wireless speakers, cell phones, Bluetooth speakers, etc.
4. Check if the Bluetooth setting on the computer is enabled.
5. Try to disconnect the mouse from Bluetooth on the computer and reconnect it.
6. If your computer has an external Bluetooth adapter, check if it is working properly and try to plug it back in again. (Since Bluetooth adapters are also external devices. They can sometimes break or stop working.

Note:
If it has been connected to all three channels, you can reconnect when you turn it on. If only one Bluetooth channel has been connected, and you accidentally press the mode switch button to a channel that has not been paired, the mouse will not respond.

The pointer moves slowly when moving the trackball. It is necessary to check whether the DPI button is pressed by mistake (DPI adjustment). If the maximum DPI still fails to meet the usage requirements, check whether the computer cursor speed is adjusted too low (Computer – Settings- Mouse Settings- Cursor Speed). If you still have any questions or problems to be solved, please do not hesitate to contact us: support@nulea.com

REFERENCE LINK