Poly M55™ Bluetooth Hand Free User Guide
TAKE A GOOD LOOK
CALL BUTTON
- Take a call (1 tap or say “Answer”)
- Reject a call (1-second press or say “Ignore”)
- Redial (2 taps)
- Initiate phone’s voice-dialing (2-second press until tone is heard)
- Reconnect lost Bluetooth® connection (1 tap if the headset doesn’t automatically reconnect)
- Activate pairing mode after initial set up (press until red/white LED flashes)
- Exit Deep Sleep™ mode (1 tap)
POWER SWITCH
- On (slide back)
- Off (slide forward)
VOLUME BUTTON
- Volume presets (1 tap per level change)
INDICATOR LIGHT (LED)
- Charging (solid red until charged)
- Very low battery (3 red flashes at powering on)
- Pairing mode (repeating red/white flashes)
MICRO USB CHARGING PORT
- Use with the AC wall charger: 1 hour before first use 2 hours (full charge)
- Do not use headset while charging
CONNECT TO YOUR PHONE
“Pairing” is the set-up process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth-enabled phone. “Multipoint” lets you pair this headset with two phones so you can answer a call from either phone.
- READY
First Time, Right Out of the Box:
Turn on the headset. The LED flashes red/white to indicate pairing mode.
Pair New or Second Phone:
Turn on headset. Press Call button until the LED flashes red/white. - SET
Activate the Bluetooth feature on your phone, then use phone menus to “add,” “search” or “scan” new Bluetooth devices. For Example: iPhone: Settings > General > Bluetooth: On (starts the search for devices)
BlackBerry®: Settings/options > Bluetooth: On > Search for devices Android™: Settings > Wireless & Networks > Bluetooth: On > Scan for devices - CONNECT
Select “PLT_M55” from the list of Bluetooth devices shown on your phone. If phone asks for a passcode, enter four zeros (0000). You may see **** on screen.Some phones also ask to confirm headset connection after pairing. Headset LED will stop flashing red/white once successfully paired/connected. You can now make a call using your phone’s keypad or voice-dialing feature.
TRY IT ON
The loop of the gel ear tip tucks into the back curve of your ear for a stable fit. Try on the headset. The ear tip is positioned to suit most people, but you may want to rotate it to best fit your left or right ear. The gel ear tip and speaker click into matching grooves so the eartip doesn’t move out of place during use. For best voice pickup, always check that the headset points towards the corner of your mouth.
TIPS
Stay Near Your Phone
Bluetooth has a working “range” of up to 33 feet between the phone and headset before audio degrades and the connection is lost.
Try Deep Sleep
If you leave your headset powered on but out of range from your paired phone for more than 90 minutes, your headset will conserve its bat-tery power by entering into Deep Sleep mode. This power-saving mode keeps your headset charged for up to 5 months so it’s ready when you need it. Once back in range with your phone, tap the Call button to exit Deep Sleep mode. If your phone is also ringing, tap the Call button again to answer your call.
Know How to Reconnect
Your headset tries to reconnect a lost connection. If it can’t, then tap the Call button once or manually reconnect via the phone’s Bluetooth device menu. If your headset remains out of range for more than 90 minutes, the Deep Sleep mode will activate.
Turn Off Voice Commands
If you prefer not to use the voice-answer feature, you can disable it and just use the Call button.With the headset powered on, simultaneously press the Call button and Volume button until you see the white LED flash twice. To reactivate the feature, just repeat the steps and you will see the white LED flash twice.
Use an iPhone to Check Headset Battery
An icon representing the battery level of your headset is automatically displayed on-screen beside the phone’s battery level icon.
Listen to Music and More
If your phone also has the Bluetooth “A2DP” stereo music feature, then your music, podcasts, favorite internet radio and other streaming audio can be heard through this headset.
Use Multipoint One Call at a Time
Once you have paired your two phones, it’s easy to answer calls from either phone. When already on a call, you will hear a ring-tone notification of the incoming call from the second paired phone. To answer a second call from the other phone, you must end the current call (tap Call button) so new call automatically answers.
If you choose not to answer the second call, it will go to voicemail.
SPECIFICATIONS
Talk Time Up to 11 hours
Standby Time Up to 16 days
Deep Sleep Mode Up to 150 days
Operating Distance (Range) Up to 33 feet (10 meters), Class II
Headset Weight 8 grams
Charge Connector Micro USB charging
Battery Type Rechargeable non-replaceable lithium ion polymer
Charge Time (Maximum) 2 hours for full
Power Requirements 5V DC – 180mA
Bluetooth Version Bluetooth v3.0
Bluetooth Profiles A2DP, Hands-Free (HFP) Profile 1.6 and Headset (HSP)Profile 1.2
Operating Temperature 32°F – 104°F (0 – 40°C)
Storage Temperature 32°F – 104°F (0 – 40°C)
Charging Temperature 32°F – 104°F (0 – 40°C)
DOWNLOAD PDF
Poly M55™ Bluetooth Hand Free User Guide
