Asus Rog MA02 Wireless Gaming Keyboard User Guide
Keyboard features
Top view (US layout for reference)
Rear view
- RGB indicator
- Caps Lock indicator
- Scroll Lock indicator
- Win lock indicator
- USB Passthrough indicator
- Magnetic side cover
- Volume control wheel
- Programmable hotkeys
- Kickstand
- Magnetic dongle storage
- USB Passthrough port
- Power switch
- USB Type-C° port
Setting up your wireless gaming keyboard
Using the USB Type-C° to Type-A adapter
Getting started
- Connect the bundled USB Type C cable to your keyboard.
- Connect your keyboard to the PC.
NOTE: If your PC does not have a USB Type-C° port, refer to the Using the USB Type-C° to Type-A adapter illustration then connect vour keyboard to the res USB TV DE A port
- Download and install the Armory Crate software from https://rog.asus.com.
- Attach the ROG CLAYMORE II keypad to your ROG CLAYMORE
- wireless gaming keyboard, then follow the software
- instructions to update your keyboards firmware
- Customize your keyboard using Armory Crate
Setting up as a wireless keyboard
- Remove the wireless dongle from the keyboard.
- Insert the wireless dongle to a USB port on the PC.
- Set the power switch to ON.
Battery Status
The RGB indicator on your gaming keyboard will turn red (breathing) and the LEDs for all the other keys will switch off when the battery power is below 25% in wireless mode. You may charge your gaming keyboard by using bundled USB Cable.
Passthrough / Fast charging mode
To use the passthrough mode or fast charging mode, ensure connect your wireless gaming keyboard to a USB Type-(* port on your with the bunded cable
NOTE:
- When charging the wireless gaming keyboard, the power output may vary according to the Us port you connect your gaming keyboard to.
- The charging speed will be faster when Passthrough abled
To use the passthrough mode:
Enable Passthrough mode (default enabled) by pressing Fn+F12, the US8 Passthrough indicator should light up when USB Passthrough it successfully enabled.
IMPORTANT!
- The Passthrough mode will be disabled if the wireless gaming keyboard is connected to a U$8 2.0 port, ensure to connect to a USB 3.2 Gen 1 or higher USB port if you wish to use the rassthrouch mode
- If the USB Passthrough indicator is blinking after enabling Passthrough mode, ensure the connected devices power consumption does not exceed 500mA
Key combinations
ROG CLAYMORE II
ROG CLAYMORE II Keypad
Media Control
Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.
Notices
Limitation of Liability
Circumstances may arise where because of a default on ASUS part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASS’ suppliers and its reseller. It is the maximum for which ASS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING:
- THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES;
- LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR
- SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMI CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Proper disposal
DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the device in fire. DO NOT short circuit the contacts. DO NOT disassemble the device.
Lithium-lon Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Service and Support
Visit our multi-language website at https://www.asus.com/support/.
DOWNLOAD PDF LINK
Q20900_MA02_ROG_CLAYMORE_II_QSG_V4_WEB
https://rog.asus.com/keyboards/keyboards/aura-rgb/rog-claymore-ii-model/
