Escort MAX360C Laser Radar Detector User Manual

Escort MAX360C Laser Radar Detector User Manual

Controls & Features

Using MAX 360c

• Plug small end of SmartCord USB into modular jack on MAX 360c and large end of SmartCord USB into your car’s lighter/accessory socket.
• MAX 360c should power on automatically. If not, press the device’s power button.

Using Wi-Fi Connect

To connect MAX 360c to your connected vehicle’s Wi-Fi network.

• Follow the directions on page 3 to register your MAX 360c, download the ESCORT Live app and pair the MAX 360c to your smartphone.
• In the ESCORT Live app press Settings, select Wi-Fi Settings then Connect to Wi-Fi Network.
• Enter your connected vehicle’s Wi-Fi network password.

After successfully connecting and when powering up, MAX 360c will briefly display the connected Wi-Fi network’s name. The speed limit indicator will be white when receiving Escort Live data from Wi-Fi (see page 6).

Using SmartCord USB

• Mute Button:
• Press to mute the audio for a specific alert.
• Press three times to lock out a false alert.
• Press twice while receiving a locked-out alert to unlock.
• When connected to ESCORT Live press and hold mute button on unit or cord to manually report to other users a verified X or K-band alert, or a police officer observing traffic.
• Alert Light: Blinks red when receiving a radar or laser alert.
• Power Light: Lights green when receiving power.
• USB Charging Port: Charge smartphones, tablets and other USB-charged Devices.

Installation

Your new detector comes with our latest EZ Mag Mount™. Simply tilt the display end of the detector up and slide it onto the mounting bracket. The magnetic mount holds the detector  in place. To remove the detector from the mount, simply lift the display end of the detector and the detector releases from the mount.

Mounting Tips:

• Center of windshield between driver and passenger.
• Ensure clear view of road ahead and sky above.
• Avoid windshield wipers and heavily tinted areas.

To mount the detector in your vehicle:

• Remove paper backing from EZ Mag Mount™ StickyCup.
• Ensure the locking clamp is open.
• Firmly press EZ Mag Mount™ StickyCup onto windshield and close the locking clamp to secure.
• To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel to secure.
• Tilt the display end of the detector slightly upward and engage with the flanged edge of the mounting bracket. The EZ Mag Mount™ magnet holds the detector in place.
• To remove the detector, simply lift the display end of the detector upward. The detector will release from the mount.
• To remove mount from windshield, release locking clamp and pull tab on top of StickyCup. EZ Mag Mount™ Care Instructions: Should the EZ Mag Mount™ StickyCup accumulate debris and lose its stickiness, simply rinse under warm water, gently wipe off debris and allow to air dry

Registration andESCORT Live

Before downloading ESCORT Live, you must first register your device. Be sure to have your device nearby, as you will need its serial number.

• Visit www.EscortRadar.com and click Product Registration.
• Click the “Registration for all devices” link.
• Follow the onscreen instructions to register your device.
• Be sure to write down the username and password you create, as you will need this information to access and download ESCORT Live. (You will also receive an e-mail with this information, once you have registered your device.)

For iPhone:

• Ensure MAX 360c power is ON
• Open the App Store on your iPhone and search for ESCORT Live Radar.
• Follow the onscreen instructions to download ESCORT Live Radar and then open the app.
• When prompted, enter the username and password you created when registering your product at EscortRadar.com.
• Press the Settings button then select Devices.
• You should see MAX 360c listed with Not Connected underneath. Press the MAX 360c device entry and when prompted select Pair.
• The Bluetooth icon on the MAX 360c display will appear to confirm that it is paired to your iPhone.

For Android based smartphones:

• Ensure MAX 360c power is ON.
• On your smartphone go to Bluetooth® Settings and make sure that Bluetooth® is ON.
• Press Scan for devices and wait for the device
  list to populate, MAX 360c Live should appear under Available devices.
• Press the MAX 360c device entry.
• The Bluetooth icon on the MAX 360c display will appear to confirm that it is paired to your smartphone.
• Open Google Play on your smartphone and search for Escort Live Radar.
• Follow the onscreen instructions to download Escort Live Radar and then open the app.
• When prompted, enter the username and password you created when registering your product at EscortRadar.com.
• Open the app, walk through the tutorial, and you’re ready to hit the road!

MAX 360c Features

• Front and rear radar receivers offer 360° ticket protection.
• Threat direction arrows report the direction an alert is coming from.
• MAX 360c’s GPS location-based intelligence automatically locks out false alerts and allows you to mark locations for future reference.
• Using Wi-Fi, MAX 360c gives you wireless access to ESCORT’s DEFENDER Database, which warns you of verified speed traps, speed cameras, and red light cameras.
• MAX 360c with built in Bluetooth® and Wi-Fi technology, gives you access to ESCORT’s award-winning app, ESCORT Live. Our exclusive real-time ticket-protection network which warns you of upcoming alerts received and reported by other users in the area, and gives you access to local speed limit data for over-speed alerts.

Congratulations

• You’ve just purchased the MAX 360c with 360° directional arrows, GPS-based intelligence, plus Bluetooth® and Wi-Fi connectivity.
• Go to EscortRadar.com for the full featured MAX 360c Owner’s Manual. www.EscortRadar.com

Settings & Preferences

Press and hold the SEN and BRT buttons to access Preferences. To exit Preferences, simply wait a few seconds without pressing a button. The unit will display Completed to confirm your selections.

Press SEN to go from Press VOLUME + or – to change one category to the next your setting within a category User Mode Advanced* Access and customize all Settings and Preferences Novice Access and customize units and display color, (all other Settings are set to factory defaults)

NOTE: Switch back to advance mode to view all Preferences.

Pilot Scan Bar* Scanning Bar with Full Word
Full Word Full Word: Auto, Auto NoX, AutoLoK or Highway
Arrow Mode Single* Displays a single threat-direction arrow only for the primary alert
Multiple Displays threat-direction arrows for multiple alerts
Band Displays color-coded threat-direction arrows for multiple alert bands
X = green, K = blue, Ka/Laser = red
Display Color Blue*/Green/Red/Amber Set color to match your vehicle’s dash display
Speed Display On* Displays current speed
Off Displays battery voltage
Cruise Alert 20 mph* Offers double beep alert tones below specified speed
Off / 20-160 mph
Over Speed 70 mph* Reminds you when you exceed a specified speed
Off / 20-160mph
Over Speed Limit Speed Limit* Reminds you when you reach specified speed at or over the speed limit
Off / Speed Limit / 5 Over / 7 Over / 10 Over / 15 Over
Meter Mode Standard Displays primary alert band with front signal strength bar graph
Standard FR1* Displays primary alert band with front and rear signal strength bar graphs
Standard FR2 Displays primary and secondary alert bands with front and rear signal strength bar graphs
Spec FR1 Displays primary alert band with numeric frequency and front and rear signal strength bar graphs
Spec FR2 Displays primary alert band with numeric frequency, secondary alert band, and front and rear signal strength bar graphs
Expert FR Displays up to four alert bands with front and rear signal strength bar graphs for each
Simple Simple messages replace alert band and signal strength bar graphs:
Caution (if traveling below cruise alert limit)
Slow Down (if traveling above cruise alert limit)

Tones Standard* Standard alert tones
Standard+ Standard alert tones for primary alert and
double-beep tones for additional alerts
Mild Mild doorbell chime alert tones
AutoMute Low / Med* / High / Off Automatically reduces audio to preferred volume during alert
AutoLearn On* / Off Automatically stores and locks out false alarms
Units English* / Metric Units for distance and speed
Language English* / Espanol Language for voice and text
Voice On* / Off Voice announcements
GPS Filter On* / Off Enables GPS-powered features
AutoPower Off Power turns on or off depending on your vehicle’s ignition
type (constant power or switched)
1 Hour Powers off automatically after 1 hour
2 Hours Powers off automatically after 2 hours
4 Hours* Powers off automatically after 4 hours
8 Hours Powers off automatically after 8 hours

NOTE: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes without moving. Display screen will turn on automatically after you reach 10MPH.

Band Enables Default* Default Settings
Modified Band Enables have been modified from their default settings
Press BRT to go from one Press VOLUME + or – to change
Band category to the next your setting within a category
X Band On* / Off
K Band On* / Off Freq: 24.050 – 24.250 GHz
NOTE: When K Band is off, you can select separate segments of the band to turn on or off.
KN1 On* / Off Freq: 24.050 – 24.110 GHz
KN2 On* / Off Freq: 24.110 – 24.175 GHz
KN3 On* / Off Freq: 24.175 – 24.250 GHz
KN4 On / Off* Freq: 23.950 – 24.050 GHz
Ka Band On* / Off Freq: 33.400-36.000 GHz
NOTE: When Ka Band is off, you can select separate segments of the band to turn on or off.
KaN1 On / Off* Freq: 33.400 – 33.700 GHz KaN6 On / Off* Freq: 34.800 – 35.160 GHz
KaN2 On / Off* Freq: 33.700 – 33.900 GHz KaN7 On / Off* Freq: 35.160 – 35.400 GHz
KaN3 On* / Off Freq: 33.900 – 34.200 GHz KaN8 On* / Off Freq: 35.400 – 35.600 GHz
KaN4 On* / Off Freq: 34.200 – 34.600 GHz KaN9 On / Off* Freq: 35.600 – 35.840 GHz
KaN5 On */ Off Freq: 34.600 – 34.800 GHz KaN10 On / Off* Freq: 35.840 – 36.000 GHz
Ka-POP On / Off*
Laser On* / Off
TSR On* / Off Automatically rejects traffic flow sensors-monitoring false alarms
Marker Enables Default* Default Settings
Modified Marker Enables have been modified from their default settings

Press BRT to go from one Press VOLUME + or – to change
Marker category to the next your setting within a category
Other On* /Off Other location
Redlight On* / Off Red light camera
Red & Speed On* / Off Red light & speed camera
Speed Cam On* / Off Speed camera
Speed Trp On* / Off Speed trap
Air Patrol On / Off* Known aircraft patroled areas

NOTE: User cannot mark an air patrol location.

Clear Locations Marked Clear all user Marked locations. Press MUTE button to confirm
Lockouts Clear all lockouts. Press MUTE button to confirm
Defender Clear all DEFENDER data. Press MUTE button to confirm
Format Clear DEFENDER database, all markers, and all lockouts
Press MUTE button to confirm
Wi-Fi On* /Off Turns Wi-Fi Connect on or off
Bluetooth On* / Off Turns Bluetooth on or off
Auto Update Off/Defender/ Automatically checks for selected updates when detector is powered on Software/All*
Perform Update Defender Perform Defender update. Press MUTE to confirm
Software Perform Software update. Press MUTE to confirm

Default Setting

Notes for Settings & Preferences
For descriptions of features and functions available when connected to ESCORT Live, visit EscortRadar. com and download the MAX 360c Owner’s Manual. To view serial number and software revision press MRK and MUTE while powering on detector. To restore MAX 360c to its original factory Settings, press and hold MRK and BRT while turning the power on. A “Restored” message will display, acknowledging the reset.

Software Updates
In its factory default settings MAX 360c automatically receives software updates from your connected vehicle’s Wi-Fi network. See Using Wi Fi Connect on page 6 for connection instructions. The MAX 360c operating firmware and red light and speed camera database can also be updated using a USB A/Mini B cable (not included) connected to a computer using our detector software tools found on our web site. In order to have access to these updates, please register your MAX 360c at www. EscortRadar.com

Warranty

Warranty exclusions: This warranty does not apply to your product under any of the following conditions: 1.The serial number has been removed or modified. 2. Your product has been subjected to misuse or damage (including water damage, physical abuse, and/or improper installation). 3. Your product has been modified in any way. 4. Your receipt or proof-of-purchase is from a nonauthorized dealer or internet auction site, including E-bay, U-bid, or other non-authorized resellers. 5. You are not the original purchaser of the Product from an authorized dealer or did not receive it as a gift from the original purchaser of the Product from an authorized dealer.

REFRENCE LINK