MAYFLASH PodsKit Bluetooth Adapter User Manual
Introduction
Thank you for purchasing the MAYFLASH PodsKit Bluetooth Audio Adapter for Nintendo Switch, PS4 and PC! Please read this manual thoroughly before using the PodsKit for the first time, and retain this manual for future reference
System Compatibility
Quick Start
Switch (handheld mode), Switch Lite, and PC (with an available USB-C port): Plug the PodsKit into the USB-C port of your Switch console / PC.
Switch (docked mode), PS4, and PC (with an available USB-A port): Attach the USB-C to USB-A adapter (included) before plugging the PodsKit in
The USB-C to USB-A adapter would cover the next USB port of the Switch Dock /PS4, to a better-using experience, an additional USB-C to USB-A cable is included that replaces the USB-C to USB-A adapter
- Set your Bluetooth headphones/earphones to “pairing” mode (please consult the operating manual of your Bluetooth device for guidance).
- Enter pairing mode on the PodsKit by holding button 1 or button 2 for four seconds
- The LED on the PodsKit will begin flashing white to indicate it has successfully entered pairing mode.
- Pairing is successful when the LED on the PodsKit changes from flashing white to constant white
- You are now ready to enjoy high-quality sound through your Bluetooth headphones/ earphones!
Connecting a Second Bluetooth
Device PodsKit supports connection for two pairs of Bluetooth headphones/earphones simultaneously
- To connect a second pair of headphones/earphones, please repeat steps 1-4 above.
- If you used pairing button 1 to connect the first Bluetooth device, please use pairing button 2 to connect the second device (and vice versa).
Notes on Bluetooth connection:
- Once a device has been paired with the PodsKit, it will reconnect automatically the next time you turn to use it.
- PodsKit stores pairing data for up to four devices.
- Headphones/earphones may need to be re-paired with PodsKit if they were subsequently paired with another Bluetooth device.
Microphone
To enable voice functionality using the included microphone:
Nintendo Switch / Switch Lite
- Plug a microphone into the 3.5mm audio jack on the console.
PS4
- Plug a microphone into the 3.5mm audio jack on the DualShock™ 4 controller.
- To set up the microphone within the PS4 settings menu: Settings → Devices settings → Audio Devices → Output device → USB Headphones (Podskit).
Product Specifications
About Bluetooth Protocols
PodsKit supports the following Bluetooth protocols (lower latency = better audio synchronous transmission): SBC: 220ms ± 50ms aptX™: 70ms ± 10ms aptX LL™: ≤40ms
Notes:
Bluetooth headsets with AptX LL™ or AptX™ technology are recommended for music/rhythm games. Low Latency transmission is available only when both the Bluetooth adapter and headset support aptX LL™ or AptX™ technology. To activate low delay transmission using atpX™ or aptX LL™ protocols, the Bluetooth headset and Bluetooth transmitter must both be equipped with aptX™ or aptX LLT™ technology. Due to the particularity of Bluetooth signal transmission and size limitations,
TWS earphones normally have weaker signal strength and anti-interference ability compared with ordinary Bluetooth earphones. Due to the specific wireless technology built into individual Bluetooth headsets, users may experience temporary disconnection or sound delays caused by electromagnetic interferences in the air. When this happens, please reduce the distance between the Bluetooth headset and the Bluetooth transmitter, and/or move to a new location.
