Marchland MC66 Tri-Mode Gaming Keyboard
WINDOWS SHORTCUTS
MACOS-SHORTCUTS
PAIRING BLUETOOTHE
FN+W/E/R Long Press for 3 seconds to pair Bluetooth device F+W/E/R Short Press to switch to last paired device Long press the FN+W/E/R for 3 seconds, the keyboard will start pairing and the blue/purple/green light of the channel 1/2/3 will flash quickly. Short press FN+W/E/R to switch to the Bluetooth channel 1/2/3.When switching, the blue purple green light of the channel trz3 flash slowly The blue/purple/green light will be always on after the connection is successful if it has never been paired. the blue/purple/green LED will flash slowly for 1 minute and then keyboard enters the sleep state
FN+T Switch to Wireless Mode
Short press FN+T to switch to 2.4G mode. When switching, the red light of the mode switching indicator flashes slowly
CHARGE INDICATOR I
Low power: LED rashes red when the battery voltage is lower than about 3.3V) Charging: Blue light is always on Fully charged: Green light is always on
KEYBOARD SLEEPING MODE:
when the keyboard is connected to the USB port, whether in Bluetooth mode or 2.4G modern he revote win or go to steep mode. When the keyboard is on Bluetooth mode or 2.4G mode, after the keyboard is left to stand for 300 seconds, the keyboard enters level 1 sleep, the backlight is turned off, press any key to restart the backlight. Then after the keyboard continues to stand for more than 30 minutes, the keyboard enters level 2 sleep. Press any key to connect back the keyboard
Push Straight
Down Please be gentle. Be sure the pins are ado neo win the stocks
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
instar Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
WARRANTY
MECHLANDS’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Mech Lands. We provide a 1 year warranty for our products when bought from our website (MECHLANDS.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
Download Pdf Link
https://epomaker.com/cdn/shop/files/Mechlands_MC66_Manual.pdf?v=16538438017634802665