Table of contents
show
Kodak Mini Shot Instant Camera User Manual
Before Start
- Mini Shot has built-in battery. Charge Mini Shot before using it.
- How to change cartridge.
Take a Photo
- Turn on Mini Shot by pressing power button.
- Press shutter button to take the photo after positioning the subject in LCD screen.
Power, Shutter and Active Status
- Shutter Button : Take a Photo
- Power ON : White / Power OFF(2 Sec) :
- Off/ Printing : White flickering
- F.W Upgrade : Pink flickering / No Cartrige,
- Error : Red Flickering
- Waiting,Cooling : White
- Charging : Red
- Green Connecting : Blue Blink
- Bluetooth Complete : Green
Control Panel
- Menu: You can select Borders, Filters, Flash or Language
- Print : Print image on LCD.
- Arrow Button: You can go to left or right in the menu.
- Arrow Button: You can go to left or right in the menu.
- OK: Confirm the setting or selected menu.
Menu
- Border : You can select border of printed image.
- Filter : You can select filters when you take the photo
- Flash : You can set Flash Auto or O.
- Language : You can set language
Taken photos are deleted when the camera is powered OFF.
Note:
- Photo Paper will go in and out 4 times (Yellow, Magenta, Cyan, Overcoating).
- Do not touch the paper during printing process for best image quality
- Do not pull paper out by force during printing.
- Do not place an object in front of the paper exit slot.
- Use the latest application for best print quality. Check the latest app version from Google Play Store and Apple App Store.
- Printer has built-in battery. Charge the printer before using.
- Handle with care during charging to prevent electric shock
Smartphone App Installation
- Go to Play Store or App Store in smartphone.
- Search “Kodak Mini Shot”
- Install it to your smartphone
Bluetooth Connection
- Turn on Bluetooth in your smartphone.
- Turn on Mini Shot.
- Go to Bluetooth setting in your smartphone and select “KODAK Mini-XXXX” (’XXXX’ are 4 digits combination of numbers and letters.)
NFC Connect
- Turn NFC on in your smart phone.
- Turn on Mini Shot.
- Tap the phone on the top of printer. Google Play Store app installation page will show up.
- Install the app into your smartphone from the store.
Troubleshooting
Symptom | Cause / Solution |
Paper Jam | Power o and Power On again. Paper will be automatically ejected If not, please contact customer service. |
Image quality is not good. | Print quality could be less if your photo source has low resolution. |
Over 1280 x 2448 pixel is recommended for best image quality. | |
Mini Shot is not responding | RESET Press Reset button with sharp tool like pin. |