Otium Mini Wireless 4.1 Music Receiver User Manual
Specifications:
- Bluetooth Version: 4.1
- Frequency Range: 2.4GHZ
- Output Power Category: Class2
- Bluetooth Mode: HFP/HSP/A2DP/AVRCP
- Bluetooth Range: Up to 30 feet
- Working Time: Up to 8 hours
- Working Current:15 mA (MAX)
- Charge Voltage: DC 5.0V
Product Diagram
- Power ON/OFF;Pause/Play; Answer/Hang Up
- Microphone
- Next Song/Volume Up
- Previous Song /Volume Down
- USB Charge
- Indicator Light
- Audio Output
Power On
Long press the button”” about 2s, it will power on automatically, the red light will stay on for 1 second then turn blue, flashing slowly.
Power Off
Long press the button”” about 3s, the red light will stay on for 1 second then power off automatically.
Instruction:
- Connect the device to your Headphone/Home Speakers or Car Stereo System with a 3.5mm audio cable.
- Pair the receiver with your phone.
- Now you can enjoy your music through your Headphone,Speakers, Home Stereo System/ Car Stereo System, or hands-free calling.
Pair to your phone:
- For the first time using the device as a receiver, you should pair it to your mobile phone.
- When powering on, long press the button”” about 5s till red and blue light flash alternately it will enter into pairing state.
- Open your phone Bluetooth.
- Search for the Bluetooth device “Otium-BTO9” and connect it.
- Enter the code “0000” if needed.
- If the pair is successful, the indicator light will spasmodically blink.
Answering a call:
When there is an incoming call, short press the button “
Rejecting a call
Long Press the button “” about 1s.
Select audio output:
When get through, long press ” “1s you can choose to answer the call through Bluetooth or phone.
Connect Two Cellphones
- Pair the Bluetooth receiver with the first phone.
- After pairing successfully, turn off the first phone’s Bluetooth.
- The receiver will enter pairing mode again.
- Pair the Bluetooth receiver with the second phone
- After pairing successfully, turn on the first phone’s Bluetooth. Select “Steamboat Mini” and click “Connect”.
- Two phones will both connect to the Bluetooth receiver.
Notice
The receiver will connect to the last connected phone automatically when it turns on. (Please make sure that your phone bluetooth is enable before turn on the receiver.)
Answer two calls at the same time:
When you are answering the call with the first phone which is paired with the Receiver, if there is a new call incoming on your second phone which is paired with the Receiver: Long press the button” “about 1s, receive the second phone call through Bluetooth, the call of the first phone will switch to answer through the phone. Long press the button” “about 1s again to switch between the two calls.
Play Music
- Play/Pause: Short press the button” “
- Next Song: Short press the button” + “
- Previous Song: Short press the button”
- Volume Up: Long press the button” +
- Volume Down Long press the button”
Call/Voice Assistant Mode
- Volume Up: Short press the button” + “
- Volume Down: Short press the button”
- Mic Unmute: Long press the button” +
- Mic Mute: Long press the button” –
Low Power Warning
When the device is in a low power state, it will alarm automatically, the red light flashes quickly; it will power off automatically if the voltage is below 3.0V.
Charge the Device
When the device is in a low-power state, please charge it through USB charging port with DC 5V. input, When finish charging, the red indicator will turn blue. Please use the micro USB cable to charge the device.
Notes
- Please charge it when in low battery or do not use it regularly, in case it won’t normally work or damage the battery.
- Bluetooth signal be blocked by surrounding objects and would influence the audio quality, please put it in the right position without a barrier between the adapter and your phone(or other devices)
Tech Support:
- Website: www.otiumobile.com
- Email: support@otiumobile.com
- Facebook: www.facebook.com/otiumobile