DYMO Mobile Labeler Bluetooth Label User Manual
Inserting the Label Cassette
Your label maker uses DYMO D1 label cassettes.
To insert the label cassette
- Press at the bottom of the cover and lift to open the cover.
- Make sure the tape and ribbon are taut across the mouth of the label cassette and that the tape passes between the label guides. If necessary, turn the ribbon rewind spool clockwise to tighten the ribbon.
Inserting the Battery
The label maker uses a rechargeable lithium-ion polymer (LiPo) battery and is shipped partially charged.
To insert the battery
- Insert the battery into the battery compartment as shown.
- Close the cover.
- Press to turn on the power. Fully charge the battery as soon as possible. The battery will take approximately 2.5 hours to fully charge.
To charge the battery
- Plug the power cord into the power adapter.
- Plug the power adapter into the power connector and plug the power cord into a power outlet.
Pairing the Label Maker
Pair the label maker to your mobile device using Bluetooth® settings on your device.
![DYMO-Mobile-Labeler-Bluetooth-Label-User-Manual-Image-5](https://manualsclip.com/wp-content/uploads/2023/08/DYMO-Mobile-Labeler-Bluetooth-Label-User-Manual-Image-5.png)
Pairing with an iOS® device
- In Settings, turn on the Bluetooth setting.
- Tap DYMO ML xxxx under OTHER DEVICES.
Pairing with an Android™ device
- In Settings, turn on the Bluetooth setting.
- Tap DYMO ML xxxx under Available devices.
Getting the DYMO Connect App
Download and install the DYMO Connect mobile app available on the Apple® App store or Google Play™ store.
Printing your First Label
To print your first label
- Tap to open the app.
- On the Home screen, tap Create new label.
- Enter some text.
- Tap to print. The label is cut automatically after printing.
- Remove the paper backing from the label and place the label on a clean, dry surface.
Rechargeable Battery Safety Precautions
Battery type: LiPolymer 7.4V 1500mAh 11.1Wh Inaccurate handling of a lithium-ion polymer rechargeable battery may cause leakage, heat, smoke, an explosion, or fire. This could cause deterioration of performance or failure. This may also damage the protection device installed in the battery. This could damage equipment or injure users. Thoroughly follow the instructions below.
Danger
- Use the battery only in the Mobile Labeler label maker.
- Battery can only be charged while inserted in the label maker using the charging adapter provided (9V/4A).
- Do not connect directly to an electric outlet or cigarette lighter charger.
- Do not store battery close to fire or inside the car where temperature may be over 60°C.
Warning
- Stop charging the battery if charging is not completed within three hours.
Removing the Battery
Make sure all cables are disconnected before handling the LiPo battery.
To remove the battery
Unplug the USB and power cables. Press at the bottom of the cover and lift to open the cover. Remove the battery from the battery compartment. Store the battery in a cool dry place.
2-Year Limited Warranty
This commercial warranty applies in addition to any applicable statutory guarantee. DYMO will repair or replace your product free of charge on the following conditions:
- Products returned under this warranty must be accompanied by a description of the defect together with a copy of the product’s proof of purchase and your full contact and delivery details: name, telephone, complete address – street, house number, postal code, city, country.
- Products returned to DYMO must be adequately packaged. DYMO will accept no liability for goods lost or damaged in transit from the customer.
- DYMO will have no liability for defects caused by accident, misuse, alteration or neglect.
- This warranty does not cover any malfunction or damage caused by the use of third-party labels.
- This warranty does not affect your statutory rights as a consumer.
DOWNLOAD PDF
DYMO Mobile Labeler Bluetooth Label User Manual