Mojawa MOJO1 Wireless Bone Conduction Headphones User Manual

Mojawa MOJO1 Wireless Bone Conduction Headphones User Manual

Components

Quick Start

• Power on:
  Press and hold the Power button for 2 seconds.
• Pairing:
  Press and hold the Power button for 4 seconds to enter the pairing mode. On your phone, tap to search for the Bluetooth device named “MOJO1” to connect.

How to Wear

Identify the left and the right of the headphones by the Volume button and the LED indicator should be on the right side. Wear the headphones by putting it in the back of your head and make it firmly seat on your ears.

• Power On
  Press and hold the Power button for 2 seconds until it says “Power On”
• Power Off
  Press and hold the Power button for 2 seconds until the tone is heard and release the Power button then it will say “Power Off and the indicator flashes red for 1 second then off.
• Volume Up/Down
  Click Vol+/ Vol-. A tone will sound whenever click the button and there will be a special tone when the volume is set to the maximum.

Multi-function Button 

Function Action
Play/Pause music Click 1x
Skip to the next track Click 2x
Back to the previous track Click 3x
Answer a call Click 1x
Decline an incoming call Press and hold the button for 2 seconds
Cancel an outgoing call Click 1x
Hang up a call Click 1x

Continue to talk with A and decline B While talking to A, press and hold the Function button for 2 seconds to decline the incoming call from B
Hang up on the call from A and answer B Click the Function button twice to hang up on the current call with A and answer the incoming call from B.
Put A on hold and answer B
While talking on the call with A, click the Function button once to answer the incoming call from B.
Voice assistant Press and hold the button for 2 seconds.
Switch between your phone and headphones for talk
Click the button twice on the call.

About Charging

Charge the headphones with the included magnetic charging cable. The indicator will flash blue after it charged full.

Bluetooth Connection

With the headphones powered off, press and hold the
Power button for 4 seconds to enter the pairing mode.
The red and blue indicators flash
On your phone, tap to search for the Bluetooth device named “MOJO1”.
The headphones say “Power On” and “Pairing”, and alternately until the headphones say “Source
Connect automatically With the headphones (with a pairing history) powered off, press and hold the Power button for 2 seconds to reconnect the last-connected Bluetooth-enabled device. The headphones say “Power On” and “Source
Disconnect Disable Bluetooth on the phone for disconnection from the headphones. The headphones say “Source twice slowly.
Turn on Bluetooth With Bluetooth disabled, press and hold the Power button and the Function button simultaneously for 2 seconds for reconnecting through Bluetooth. The headphones say “Source Connected ”.

Turn off Bluetooth When Bluetooth connection is established, press and hold the Power button and the Functionbutton simultaneously for 2 seconds for disconnection of Bluetooth.
The headphones say “Source Disconnected ”.
Unpair Use the phone to cancel the pair with the headphones.
The headphones say “Source Disconnected Pairing” erable again.
Reconnect automatically With the headphones powered on,

• When the headphones have been paired with the phone, move the headphones outside the Bluetooth range for disconnection;
• When the headphones are moved back within the Bluetooth range within 10 minutes, the headphones automatically resume the connection with the last connected phone (if the headphones have been paired with several devices, the headphones automatically reconnect the last connected Bluetooth-enabled phone), say “Source Connected ”, and resume the fore the last disconnection.

Specifications

Model: MOJO1 Speaker:Bone conduction speaker
Frequency response: 2.4GHz Bluetooth range: 10 m
Microphone sensitivity: -36dB Bluetooth version : Bluetooth 5.0
Bluetooth protocol: A2DP 1.3, HFP (Hands- Endurance: Up to 8 hours
Battery type: Li-polymer battery Charging time: <=80 minutes
Standby time: The product will power off automatically when it is not connected for 3 minutes.
Power supply:5V 500mA
Weight: 34g(with Alula) Warranty period: 1 year
Charging voltage: 5±0.25 V Ingress protection rating: IP67
Speaker impedance: 8.0 ohm±20% Battery capacity: 150mAh
Bluetooth frequency range: 2.402-2.480 GHz Bluetooth output power: >=3dBm

LED Indicator

Flashes blue for 1 second Power on
Flashes red for 1 second Power off
Flashes blue slowly Connectable
Flashes red and blue 3 times every second Ready to pair
Flashes blue for 1 second Connected
Incoming call

When the battery level is lower than 30%, the indicator flashes red at an interval of 1 second. When the battery level is between 30% and 80%, the indicator flashes green at an interval of 1 second. When the battery level is between 80% and 100%, the indicator flashes blue at an interval of 1 second. When the battery is fully charged, all indicators turn solid blue simultaneously.
Charging
The indicator flashes red for 0.05 seconds every 10 seconds for two times.
Low battery
The indicator flashes red for 0.5 seconds and then off for 0.5 seconds, repeating for three times.
Reset to factory default settings

Storage and Maintenance

• The headphones should be stored in a cool and dry place. It should be used at the ambient temperature between 5°F (-15°C) and 131°F (55°C) and charged at the ambient temperature between 32°F(0°C) and 104°F(40°C). The lifespan of the battery may be reduced when it is operated in extreme environment where it is too cold, hot or damp.
• When left unused for a long time, the headphones must be recharged before use.
• The headphones may be cleaned regularly, but the microphone may not be flushed or immersed, otherwise, its performance may be affected.
• Clean the headphones with a soft and dry cloth.
• Please do not charge the headphones immediately after sports as any residual sweat at the charging port may damage the circuit of the headphones.
• A dry charging port helps to reduce the damage risk of your headphones during charging.

Important Safety Instructions

Use manufacturer-designated accessories and supplies only.

Warning/Caution

• The headphones should be kept out of the reach of children and pets to avoid swal- lowing it in accident. There is a Li-polymer battery in the headphones, which can potentially cause a hazard. If the part is swallowed, seek medical care immediately. The unused headphones should be kept out of the reach of children and pets.
• Do NOT use the headphones at a high volume for an extended period.
• To avoid hearing damage, use the headphones at a comfortable, moderate volume level. Your hearing may be damaged and the sound may also be distorted at a super high volume.
• Turn the volume down on the headphones before placing it in your ears, then turn the volume up gradually until you reach a comfortable listening level.
• Use caution and follow applicable laws regarding the use of phone and head phones if using the headphones for phone calls while driving. Some jurisdictions the headphones for any other purposes while driving.
• When you need to use the headphones while engaging in an activity needing con struction site or railroad, please beware of your safety and follow relevant laws regarding the use of headphones.
• This product contains small parts which may be a choking hazard. It is not suitable for children under age 3.
• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
• Do not make unauthorized alterations to this product.
• Use this product only with an agency approved power supply that meets local reg- ulatory requirements (e.g., UL, CSA, VDE, CCC).
• Do NOT expose products containing batteries to excessive heat (e.g. from storage in
• Do not charge this product during thunder and lightning.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
• Apple, the Apple logo, iPad, iPhone, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries/regions. App Store is a service mark of Apple Inc. Use of the veloper to meet Apple performance standards. Apple is not responsible for the operation of this product or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
• Android, Google Play, and the Google Play logo are trademarks of Google LLC.

Optional Accessories

Earplugs
When traveling by plane or train, you may use ear earplugs to block out background noise and enjoy better bone conduction sound.

Adjustable clip

Alula clip is suitable for different adjustable clips for varying grip. Safety Reminder: When you wear the headphones with an Alula in a dark enAlula, which will serve as a reminder to warn the driver to pay attention to safety driving.

Reset to factory default settings

Press and hold the Power button and Function button simultaneously for 4 seconds. The headphones will be reset. All the pairing history will be deleted and the volume is reset to the initial value, 8.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

REFRENCE LINK

https://mojawa.com/