Soundcore-Motion-Speaker-fig-featured

Soundcore Motion+ Speaker User Manual

Views: 107
Table of contents show

Soundcore-logo

Soundcore Motion+ Speaker

Soundcore-Motion-Speaker-fig-product

Safety Instructions

  • Avoid dropping.
  • Do not disassemble.
  • Soundcore Motion+ can be immersed in water up to 1m for up to 30 minutes.
  • Avoid extreme temperatures.
  • Do not use the device outdoors during thunderstorms.
  • Do not use any corrosive cleaner / oil to clean.

What’s IncludedSoundcore-Motion-Speaker-fig-1At a GlanceSoundcore-Motion-Speaker-fig-2

  1. Bass Indicator
  2. Bass Button
  3. Volume – Button
  4. Multi-function Button
  5. Volume + Button
  6. Bluetooth Button
  7. Bluetooth Indicator
  8. Power Button / Power Indicator
  9. USB Type C Port
  10. 3.5mm Audio Input Port

Using Your Soundcore Motion+

  1.  Turn On / OfSoundcore-Motion-Speaker-fig-3

Soundcore Motion+ is equipped with High-Resolution Audio. This specialty gives the speaker a better sound quality by referring to digital processes that allow playback of music using higher sampling rates.

Note: Soundcore Motion+ supports Qualcomm® aptX™.

Bluetooth mode Soundcore-Motion-Speaker-fig-4Soundcore-Motion-Speaker-fig-5

With True Wireless Stereo technology, you can pair your Soundcore Motion+ with another Soundcore Motion+ to explore the best sound effects with left and right sound channels separated on both speakers.

MusicSoundcore-Motion-Speaker-fig-6Soundcore-Motion-Speaker-fig-7Mobile phoneSoundcore-Motion-Speaker-fig-8

When turned on, Soundcore Motion+ will automatically connect to the last connected device if available. If not, press the Bluetooth button to activate pairing mode. To pair a different device, press the Bluetooth button to re-enter pairing  mode. Then repeat the pairing steps.Having connection problems? Remove Soundcore Motion+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

AUX-In modeSoundcore-Motion-Speaker-fig-9

Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.

Charging your Soundcore Motion+Soundcore-Motion-Speaker-fig-10Soundcore-Motion-Speaker-fig-11

Use the included USB cable to charge your Soundcore Motion+ and make sure it is fully charged before its first use. USB type C cable only supports charge in, it does not support charge out. Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods. When not in use, store your speaker in a cool place.Soundcore-Motion-Speaker-fig-12

Specifications

  • Input: 5 V 2 A
  • Audio output: 30 W
  • Battery capacity : max.6700mAh
  • Charging time : Approximately 4 hours(When power is off and the adapter must be at least 5V/2A)
  • Playtime (varies by volume level and music content): 12 hours
  • Size: 257 x 79 x 81 mm / 10.1 x 3.1 x 3.2 inch
  • Weight (without packaging): 1050 g / 37 oz
  • Bluetooth version: V 5.0
  • Bluetooth range: 30m/99ft
  • Sound Frequency Range: 50Hz~40kHz

Download Link

https://dix7fd4yse9rd.cloudfront.net/s/Soundcore/product/6109030547646/files/1608603719981_soundcorea3116manualmulti20201125v02.pdf

Tags: , , , , ,

Leave a Reply