EDIFIER MP260 Bluetooth Speaker Featured image

EDIFIER MP260 Bluetooth Speaker User Manual

Edifier logo

EDIFIER MP260 Bluetooth Speaker Manual

EDIFIER MP260 Bluetooth Speaker Product image

Important safety instruction

  • Please read the instructions carefully. Keep it in a safe place for future reference.
  • Use only accessories approved by the manufacturer.
  • Using the product in a 0-35°C environment is recommended. Shipping and storing the product in a 0-35°C environment is recommended.
  • To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
  • Do not use this product near water. Do not immerse the product in any liquid or have it exposed to dripping or splashing.
  • Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).
  • Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product.
  • Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric shock.
  • Keep sufficient clearance around the product to maintain good ventilation (a minimum of 5cm is recommended).
  • Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and is oriented in the right direction.

Warning

  • Keep the provided accessories and parts (such as screws) away from children to prevent them from being swallowed by mistake.
  • Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless of the cause of the damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately.
  • Before cleaning the product with a dry cloth, always turn off the product and disconnect the power plug first.
  • Never use strong acids, alkalis, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning.
  • The product must be used at an altitude of lower than 2000m.

Battery-powered products:

The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Never disassemble, hit with force, squeeze batteries, or dispose of batteries in a fire. Do not expose batteries to conductive materials, liquid, fire, or heat. Do not let metal objects contact two battery poles. If the battery looks swollen, leaking, discolored, odor, or has any abnormal appearance, stop using it.

Do not use the battery after being immersed in water. Improper use of the battery may lead to explosion or leakage, causing skin burns or other injuries; in the event of battery leakage, handle it with care and immediately dispose of the battery in a manner in compliance with applicable laws and regulations in your locality. The battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

For wireless products:

  • Wireless products may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment.
  • Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplanes, at gas stations, near automatic gates, automatic fire alarm systems,s or other automated devices.
  • Do not use the product in the vicinity of a pacemaker within a 20cm range. Radio waves may affect the normal operation of the pacemaker or other medical devices.

Product Description and accessories

EDIFIER MP260 Bluetooth Speaker FIG 1EDIFIER MP260 Bluetooth Speaker FIG 2

User guide

Clock settings

  • Press and hold the ” ” button for clock settings;
  • Press the ” ” ” ” buttons to switch among AM/PM mode, hour and minute, and press the ” ” ” ” buttons to adjust AM/PM status or hour & minute value;
  • Press the ” ” or ” ” button to exit and save the settings.

Alarm clock settings

  • Press and hold the ” ” button for alarm clock settings;
  • Press the ” ” ” ” buttons to switch among AM/PM mode, hour, minute, and alarm clock volume, and press the ” ” ” ” buttons to adjust AM/PM status or hour value, minute value, and alarm clock volume level;
  • Press the ” ” or ” ” button to exit and save the settings;
  • Press the ” ” button to turn on/off the alarm clock.
  • When the alarm clock rings, press any button to turn it off.

Tips
To use the alarm clock function, please ensure the product is always connected to the power adapter, so as to avoid failing to enable the alarm clock due to battery exhaustion.
Note: Images are for illustrative purposes only and may differ from the actual product.

Bluetooth connection

  • Turn this speaker on and press the ” ” or ” ” button to switch to Bluetooth mode;
  • Set your mobile phone to search for and connect to “EDIFIER MP260″, after pairing is successful, the ” ” icon will be steady shown on the display screen.

EDIFIER MP260 Bluetooth Speaker FIG 3

Specifications

  • Total watts (peak)… 40W
  • Total watts (RMS)… 20W (R/L: 4W+4W SW: 12W)
  • Frequency response… 53Hz-18KHz
  • Tweeter unit… 1 3/4 inch (45mm)
  • Bass unit… 2 3/4 inch (70mm)
  • Audio inputs… Bluetooth, AUX, microSD (TF) card, USB flash disk, USB audio streaming

Declaration for EU

Frequency Band… 2.402GHz ~ 2.480GHz
RF Power output… ≤20 dBm (EIRP)
There is no restriction of use.

Troubleshooting

No sound

  • Check if the speaker is ON.
  • Try to turn up the volume using the volume control.
  • Check if there is a signal output from the audio source.

Cannot connect via Bluetooth

  • Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect.
  • The effective Bluetooth transmission range is 10 meters; please ensure that operation is within that range.

Noise coming from speakers

EDIFIER speakers generate little noise, while the background noise of some audio devices is too high. speaker, then there is no problem with this product. To learn more about EDIFIER, please visit www.edifier.com.

Noise coming from speakers
EDIFIER speakers generate little noise, while the background noise of some audio devices is too high. Please unplug the audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with this product. To learn more about EDIFIER, please visit www.edifier.com For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms. USA and Canada: service@edifier.ca South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/ Portuguese) for local contact information.

REFERENCE LINK

https://www.edifier.com/product-mp260.html

DOWNLOAD PDF

2021121418172816394770484929_compressed

Leave a Reply