Monster MS32105 STINGER Gaming Wearable Speaker Manual
Product Overview
- Speaker Unit
- USB-C Charging Cable
- Quick Start Guide & Warranty Letter.
Power/Charging
For better enjoyment, fully charge the speaker before use. A USB-C charging cable (charge only) is included for standard USB-compatible devices. Please use a 5V/1A or above power adapter (not included). Caution:
- Use a compatible standard 5-volt power adapter ONLY.
- Other incompatible chargers may cause damage.
- Do not use it if the connector or device is wet or damaged.
Power On/Off
To turn on the speaker, press and hold the Power On/Off Button for 2 seconds, you will hear a power on tone. To turn off the speaker, press and hold the Power On/Off Button for 2 seconds, you will hear a power off tone. Caution: If no Bluetooth device is connected, the speaker will turn off in 15 minutes.
Pairing
The first time you “power on”, the speaker will enter pairing mode automatically. When the speaker is not connected to any Bluetooth device, the pairing mode will start automatically. In pairing mode, turn on the Bluetooth function on your phone and search for “Monster Stinger” for pairing. When the speaker is connected, a prompt tone will be heard, the blue RGB light will stop flashing and remain on.
Volume Control
Short press the Volume Button “˄” or “˅” to turn the volume up or down.
Music Mode Play/Pause:
Press the MFB to play or pause. Next song: press and hold the “˄” button for 2 seconds. Previous song: press and hold the “˅” button for 2 seconds.
Call
- Answer call: Short press MFB.
- Reject call: Press and hold the MFB for about 2 seconds.
- End call: Short press MFB.
Light Mode:
When the speaker is on, press the MFB for 3 seconds to alternate various light settings. Press the MFB twice to turn off the light.
Power Saving Setting
Power saving mode is activated when the speaker is turned on. If no device is connected or no music playback or data transmission via Bluetooth, the speaker will turn off automatically in 15 minutes.
RGB Indicator Guide
| Status | Description | Voice/Tone |
| Power On | RGB light on | Opening Tone |
| Power Off | RGB light off | “Goodbye” |
| Pairing | RGB light flashing | “Discovering” |
| Bluetooth connected | RGB light on | “Your device is connected” |
| Battery low | – | “Battery low” |
| Charging | Red RGB lights when charging, turn off and fully charged | – |
Reset the Paired Device List
When power is on and no music playback, press both the “˄” and “˅” buttons simultaneously for the factory default.
Caution
- Self-replacement of battery is prohibited.
- Do not expose the battery (battery pack or battery pack combination) to direct sunlight, fire, or high temperatures.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
