Coocaa MUC6100 Series HD LED TV User Manual

Coocaa MUC6100 Series HD LED TV User Manual

PREPARATION

Unpacking and Installation

Standard Accessories

Stand Installation

Step 1: Take out the TV and carefully put it (screen downward) on a stable and flat table with a soft cloth or cushion on it.
Step 2: Please check to make sure there are the same mark(A/B) on the TV back and the correct stand. This step is not available for the stands without any mark on it, or not available for the TV with one stand only.
Step 3: Fix the stands to the TV by using the matching screws provided in the box. The stands may vary depending on the region or model.

Important Safety Instruction

• Read these instructions: All the safety and operating instructions should be read before this product is operated.
• Keep these instructions: The safety and operating instructions should be retained for future reference.
• Heed all warnings: All warnings on the appliance and in the operating instructions should be adhered to.
• Follow all instructions: All operating and use instructions should be followed.
• Do not use this apparatus near water: The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
•  Clean only with dry cloth.
•  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as direct sunlight, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•  Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong.
•  Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.

Positioning the TV

• Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
• Fix the rear of enclosure to wall(only for some countries)

Warning:
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
• ALWAYS use furniture that can safely support the television set.
• ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
• ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
• NEVER place a television set in an unstable location.
• NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

Mounting on a Wall

• An optional wall mount can be used with your television. Consult with your local dealer to purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor.
• Disconnect the power before moving or installing the TV. Otherwise electric shock may occur.
• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
• If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized wall mount and contact the local dealer or qualified personnel. Otherwise it is not covered by the warranty.
•  Do not over tighten the screws as this may cause damage to the TV and void your warranty.

Precautions For Using Remote Control

• Use the remote control by pointing it towards the remote sensor. The items between the remote control and the remote sensor will interfere the normal operation.
• Do not make remote control vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in high humidity place.
• Do not place remote control under direct sunlight which will cause deformation of the unit by heat.
•  When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.
•  Before Bluetooth searching, please make sure you have turned external Bluetooth devices in the pairing mode. For the Bluetooth remote control supplied with the TV.

Precautions For Using Battery

1.  Please note the batteries’ polarity, to avoid short circuit.
2.  When the battery’s voltage is insufficient which affect the use range, you should replace new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
3.  Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose of batteries in compliance with relevant environmental protection regulations.

TERMINAL CONNECTION

AVIN
Receive audio and video signals from AV devices such as DVD.

ANTENNA IN
Connect a coaxial cable to receive signal from the antenna, cable or satellite.

USB
Connect a USB storage device.

HDMI
Receive HD input signal from HDMI devices such as DVD.

DIGITAL AUDIO OUT
Use an optical cable to output your TV’s audio signal to a compatible digital audio receiver.

REMOTE CONTROL

1. POWER: Turn the TV on or to standby mode.
2.  MUTE: Mute or restore the TV sound.
3.  Number buttons (0-9): Select the channel directly, or input a number
4. SOURCE: Select the input source.
5.  INFO: Access the INFO interface.
6. MENU: Access the menu of quick settings.
7. HOME: Access the home page.
8. Navigation Buttons: Navigate the menu to select the content you need.
9.  OK: Confirm, enter or execute the selected item, or show the list of Quick Button.
10.  EXIT: Exit the current operation.
11. BACK: Return to upper-level content, or exit the current screen.
12. Application Buttons: Access specific applications directly.
13. Program Up/Down (P 11/v): Switch channels.
14. Volume Up/Down (VOL+/-): Adjust the sound volume.
15. GUIDE: Access the EPG interface in DTV mode.
16. MIC ( •,, ): Start using the near field voice function.
17. ••• USB Play Control Buttons•••
18. Play: Start the playback.
19. Pause ( II ): Pause the playback.
20. Fast Backward ( .- ): Fast backward the playback.
21. Fast Forward: Fast forward the playback.
22. SUBTITLE: Turn on or turn off the subtitle menu.
23. AD: Turn on or turn off the function of audio description.
24. Color Buttons (R/G/Y/B): Execute the prompt function in specific mode.

BASIC OPERATION

E-Manual
E-Manual is built into your TV and can be displayed on the screen. To learn more about your TV features, access your E-Manual by referring to the following.

1. Press HOME button to access the home page.
2.  Press and OK button to select and enter “E-Manual” in “Apps”.

TV Control Button

 In standby mode:
Short press TV control button to turn on the TV

In working status without the source list:
Short press TV control button to call out the following menu of soft key board. Inside it, short press TV control button to move the cursor and select the desired item. Long press TV control button to enter or execute the selected item.

TROUBLE SHOOTING

Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.

General Problem / Solution

• Change the batteries.
• Check if batteries are installed correctly.
• Check if main power is connected.
• Check if there are some items between remote sensor and remote control.
•  Poor Signal
• This is usually caused by interference from electronic equipment or radio interference sources.

Picture & Sound / Solution

No picture, no sound
Check the signal source. Plug another electrical device into the outlet to check if it is working or turned on. Check if power plug is in good contact with the outlet.

No sound, picture OK
If no sound, unmute the sound or increase the volume. Open the sound menu and adjust ‘Balance’.

Abnormal picture
For no color or bad picture quality, you may:

1.  Adjust the color option in menu settings.
2.  Keep the TV at a sufficient distance from other electronic products.
3.  Try another channel. Bad TV signal (Display mosaic or snowflakes)

SPECIFICATION

REFERENCE LINK

https://coocaa.eu/support/