WISEQ Multifunctional Wireless Headphone User Manual

wiseq-logo

WISEQ Multifunctional Wireless Headphone User Manual

WISEQ Multifunctional Wireless Headphone User Manual

OVERVIEW

WISEQ-Multifunctional-Wireless-Headphone-2

 

BT Stereo Headphone EM Stereo Radio /Wired Headphone / MP3 PlayerWISEQ-Multifunctional-Wireless-Headphone-3

  1. LED indicator
  2. 0/M Multi-function button(power on/off. pairing. play/pause, auto search radio)
  3. Volume down(Long Press/Last song(Short Press)
  4.  /V+ Volume up(Long Press)/Nest song(Short Press)
  5. MP3/FM
  6.  answer/end calls, reject call, last number redial
  7. Micro SD/TF card slot
  8. Micro USB charging port
  9. Headset jack
  10. Microphone
  11. 3.5mm AUX cable
  12. Charging cable

Power on/off the headset

  • Power on: Press the multifunction button for about 2-3 seconds until the blue and red indicator light flash alternately
  • Power off: Press the multifunction button for about 2-3 seconds until the blue indicator light goes off

Pair to your mobile phone or other products

  • Press the multifunction button for about 2-3 seconds until the indicator light starts flashing red and blue alternately
  • Turn on the BT function of your phone or other products
  • Search for the BT devices and select” BT wireless:(Enter the code 0000′ if needed)
  • If paring is successful the blue light indicator starts flashing (the headset said: the BT is connected successfully).
  • It will conncet to the pre-set phone automatically when turns on(Please make sure the BT function of your phone is on)
  • If the pairing is not successful, please switch off headset firstly, and then re-pair again.

MP3/FM

  • In power-on mode, insert the TF card, MP3 will play automatically.
    IF no SD card, short press MP3/FM button, FM radio will play automatically.
  • In power-on mode, short press MP3/FM button FM radio will play
    automatically. Short press the multifunction button to auto search all radio
    station, wait for a moment, then short press WIN-ort you can choose what you like and the blue light flash slowly
  • If you are listening FM radio, short press MP3/FM button, it will be converted to the BT mode. It will connect your phone or other device

Answer/end call, reject call, last number redial(In the BT mode)

  • When there is a call, short press 6 button can answer the call. After the
    call, press f button can hang up. If the other side hang up. no need press the button
  • Reject call: press long 6 button about 2-3 seconds
  • Last number redial: press fast 6 button 2 times
  • When the phone call out or answer the call, if the BT headphone is playing the music, the music will pause automatically and enter the waiting state. After hang up the music will go on play automatically.

Charging the headset

  • Insert USB charging cable into USB port which have support 5V power (such as
    AC/DC USB adapter or PC USB port). Connect charging cable to the charging
    port of headset. When the red light is on, the headset is in charging. The red light
    Will be oft when the headset is fully charged
    It takes about 3 hours to chare the headset fully.
  • The battery is rechargeable. Low-power indicator: When the alert tone “low battery”.
    this indicates the battery has discharged and needs to be charred. First time charging?
    please be sure the battery has been fully charged before initial use.

Wired headphone function

Any mode of headphone, Connect one side of 3.5 stereo sound supply extension line to headphone audio jack, connect the other side to Audio jack(such mobile phone, computer. ipad etc). You will hear songs from other device.

Leave a Reply