Munbyn-ITPP072-Thermal-Printer-User-Manual-Feature-Image

Munbyn ITPP072 Thermal Printer User Manual

Views: 25
Table of contents show

Munbyn-logo

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image

Munbyn ITPP072 Thermal Printer User Manual

Introduction

This document describes the setup procedure for the ITPPO72.  For detailed instructions, please refer to the ITPP072 Thermal Printer manual. ITPP072 Thermal Printer Manual: munbyn.biz/072UserManual

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-1

Packing List

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-2

  1. Printer
  2. Power Cord
  3. USB Cable
  4. Power Adapter
  5. User Manual
  6. Roll Paper
  7. Roller

Paper Loading

  1. Press the cover opening button and then open the cover.
  2. Insert a roll of paper in the direction shown in the illustration.

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-3

Initial Setup

Set Up the ITPP072 for First Use on Windows 4.1.1

Download Windows Driver:

You can get the driver by clicking the link below to download the drive Driver download: munbyn.biz/07UserManual Setting tool download: munbyn.biz/WTool

USB Interface

  1. Connect the printer to the power outlet via the power cord.
  2. Connect the printer to your Windows computer via USB. 3) Place the thermal paper into the printer and power it on.

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-4

LAN Interface

  1. Power on the printer and wait for it to automatically configure the IP address, which should take around 15 seconds.
  2. Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-5Open the driver on your Windows computer and follow the installation Path:
    • Printer interface: Select [LAN], the printer IP address will be displayed in the white box on the right.

Set Up the ITPPO72 for First Use on MacBook

Download MacBook Driver:

You can click the link below to download the driver. Driver download: munbyn.biz/MACD

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-1

USB Interface

  1. Connect the printer to the power outlet via the power cord.
  2. To connect the printer to your Mac, plug one end of the USB cable into your Mac’s USB port and the other end into the printer.
  3. Place the thermal paper into the printer and power it on

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-6

 LAN Interface

  1. Power on the printer and wait for it to automatically configure the IP address, which should take around 15 seconds.

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-7

Set Up the ITPPO72 for First Use on Ubuntu

Download Ubuntu Driver:

You can click the link below to download the driver. Ubuntu driver or Raspberry Pi driver download link:  munbyn.biz/ubuntud

Notice: This driver file is not compatible with 32-bit.

 USB Interface

  1. Connect the  printer to the power outlet via the power cord.
  2. Connect the printer to your Ubuntu  computer via USB.
  3. Place the thermal paper into the printer and power it on.

Munbyn-ITPP072-Thermal-Printer-User-Manual-Image-8

Product Specifications

Brand‎MUNBYN
Max print speed monochrome‎230
Product dimensions‎19.5D x 21.5W x 14.7H centimetres
Controller type‎Android
Printer media size maximum‎80mm

FAQS

What are the limitations of a thermal printer?
  • Slower print speeds.
  • Short-lasting thermal printheads.
  • High cost of direct thermal films.
  • Limited label material selection.
  • Susceptible to extreme heat, which causes labels to darken.

Can a Munbyn thermal printer print color?

Not supported. ITP01 thermal printer can only print in black and white.
What is the disadvantage of thermal printer?
  • Light exposure.
  • High heat.
  • Excessive physical contact.
  • Chemical exposure.
  • Aging.

How to calibrate a Munbyn thermal printer?

Load no less than 4 consecutive sheets of paper into the printer. After the paper stop moving, press and hold FEED (red/green light), and when you hear a beep, release the feed.
How do I restart Munbyn?
  1. Turn off the printer.
  2. Press the FEED button and hold.

What is a thermal printer measured in?

The printing speed of thermal label printers is measured in inches per second (IPS)

What is the principle of thermal printer?

There is no ribbon, ink or toner involved with direct thermal printing.

Does a Munbyn printer need ink?

MUNBYN USB label printer P941 is equipped with a Japanese ROHM print head, which uses direct thermal technology and requires no ink or toner.

Are thermal printers waterproof

While direct thermal prints are generally not waterproof, thermal transfer prints have the potential to be water-resistant

DOWNLOAD PDF

[pdf-embedder url=”https://manualsclip.com/wp-content/uploads/2025/03/3ba1bd880c3da4f863d715429617a3e101bf8fa0e19d5a5d9099f58694a405b6_optim.pdf”

Tags: , , , , ,