Yealink MVC860-C3-211 Room System For MS Teams User Guide
Safety Instructions
- Contact the specified maintenance center for repair.
- Please attempt not to dismantle the device by yourself.
Environmental Requirements
- Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
- Keep the device dry and free of dusts
Operating Requirements
- Do not let a child operate the device without guidance.
- Please use the accessories provided or authorized by the manufacturer only.
- The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only
Package Contents
MTouchⅡ
7.5m Ethernet Cable
USB Type-C Cable (with an HDMI adapter)
![Yealink-MVC860-C3-211-Room-System-For-MS-Teams-User-Guide-Image-5](https://manualsclip.com/wp-content/uploads/2023/10/Yealink-MVC860-C3-211-Room-System-For-MS-Teams-User-Guide-Image-5.png)
MTouchⅡ Connection
Connect your MTouchⅡ
Assemble your MTouchⅡ
MTouchⅡ Installation
Put on a table
You can place the system on the conference room table and adjust the touch screen as you needMount on a Wall
Hardware Interface Instructions
No. | Port | Description |
① | 3.5mm Headset | Connect to a headset. |
② | USB-A Port | Connect to the WPP20 to pair with WPP20 for wireless sharing. |
③ | USB-C Port | Connect to the PC for wired sharing. |
④ | USB-A Port | Connect to a USB audio device, such as CP900. |
⑤ | VCH Port | Connect to the MCore, and the MTouchⅡ is powered by the MCore. |
Wireless Presentation
Procedure
- Connect the WPP20 to the USB port of the MTouchⅡ.
- Wait for about 3 seconds, and the WPP20 LED indicator glows green.
- Connect the WPP20 to the PC.
- For the WPP20 running older versions, after starting the software, you need to manually upgrade the firmware on the software at the path of ->Version Update. After the upgrade is successful, the WPP20 is ready for content sharing. Go to Yealink website(http://support.yealink.com) for the latest version of the firmware.
LED Indicator Instructions
LED Indicator of Working Status
LED Status | Description |
Solid yellow | MTouchⅡ is not connected to a PC or you do not use WPP20 for content sharing. |
Solid green | MTouchⅡ is connected to a PC for wired sharing or you use WPP20 for wireless sharing. |
Solid red | MTouchⅡ is in sleep mode. |
Fast-flashing yellow | MTouchⅡ is upgrading firmware. |
Slow-flashing red | Failed to upgrade firmware. |
Cleaning Requirements
- Before cleaning the device, disconnect it from the power supply.
- Use a piece of soft, dry and anti-static cloth to clean the device.
- Keep the power plug clean and dry.
Troubleshooting
There is a bad connection with the plug. Clean the plug with a dry cloth. The usage environment is out of operating temperature range. Use in the operating temperature range. The cable between the unit and the Yealink device is connected incorrectly. Connect the cable correctly. You cannot connect the cable properly. You may have connected a wrong Yealink device.Use the correct power supply. Some dust, etc., may be in the port. Clean the port.
FCC Statement
This device complies with part 15 of the FCC Rules. two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
DOWNLOAD PDF
Yealink MVC860-C3-211 Room System For MS Teams User Guide