Nutribullet NBG50100 Everygrain™ Cooker Manual

Nutribullet NBG50100 Everygrain™ Cooker Manual

Important safeguards.

Warning! To avoid the risk of serious injury, carefully read all instructions before operating your nutribullet®. When using any electrical appliance, basic safety precautions should always be observed, including the following important information.

Save these instructions!
FOR HOUSEHOLD USE ONLY

GENERAL SAFETY INFORMATION

• Close supervision is necessary when any appliance is used by or near children. Keep cord out of reach of children. This appliance is not a toy. Do not allow children to play with it.
• To protect against fire, electrical shock, and injury to persons, do not immerse the appliance, cord, or plug in water or any other liquid.
• Unplug appliance from outlet when not in use and detach power cord from the appliance before putting on or taking off parts, and before cleaning or attempting to move the appliance. Allow to cool before putting on or taking off parts.
• Regularly inspect the power cord, plug, and actual appliance for any damage. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact NutriBullet® Customer Service for assistance at 1 (800) 523-5993.
• The use of attachments not recommended or sold by NutriBullet® may cause fire, electric shock, or injury.
• This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. DO NOT USE OUTDOORS. Misuse may cause injury.
• Do not let the power cord hang over the edge of a table or countertop.
• Do not let the power cord touch hot surfaces, or become knotted or tangled.
• Do not touch hot surfaces. Use handles or knobs, and use oven mitts when lifting the steaming basket or cooking pot from the base.
• Do not place the cooker on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot food or hot liquids.

What’s included

Assembly guide

Control panel: cooking programs

TO SELECT A COOKING PROGRAM:
Select one of the 5 auto-cook programs by pressing the button of the cooking program you desire on the control panel, located on the front of the unit, below the lid. To change programs, just press a different button. Once pressed, the button lights up fully, indicating your chosen program.

Measuring & cook time guide

Steam time guide

When using the Steam Program, The EveryGrain™ Cooker will automatically preheat before it begins the timer countdown. Preheating takes between 5-9 minutes.

Inner pot markings

On the inside of the EveryGrain™ Cooking Pot, there are markings that serve as a useful cooking guide, indicating how much water to put in the pot for the grain type and number of scoops you’re cooking. Always be sure to add your rice or grains first, and then add water.

Assembly & use

Before first use.

Before using your NutriBullet® EveryGrain™ Cooker for the first time, please take a moment to perform the steps below.

1. UNPACK Open the box and remove the appliance with its various components, placing all parts on a flat, level, and dry surface.

2. CLEAN The Steaming Basket, Spatula, and Measuring Scoop are all dishwasher safe, or you can rinse them with warm, soapy water to clean. Rinse the Cooking Pot with warm soapy water, and clean the Cooker Base with a clean, damp cloth.

WARNING: Never submerge the Cooker Base in water or any other liquid.

GENERAL TIPS

• Afteryou press down on the button to open the Cooker Lid, the lid will automatically rise up and stay in an upright position on its

CAUTION: Do not overload the pot with food and water. Keep its contents below the highest line shown on the inner pot markings.

• Clean the outside of theCooking Pot before putting it into the Cooker
• When closing the CookerLid, make sure to press the lid all the way down, until you hear a click to indicate that the lid is locked in
• The cooker automaticallyenters Keep Warm program for up to 3 hours after the cooking cycle completes,

so grains are always warm and ready to eat.

DON’T USE METAL UTENSILS OR METAL SCOOP

To protect the non-stick coating on the Cooking Pot and other parts of the cooker, don’t use

a metal spoon or other metal utensils when using this product. Use the included Spatula, or wood/plastic utensils.

AFTER COOKING IS DONE
To avoid rice sticking together, stir within 30 minutes in Keep Warm program.Unplug appliance when not in use for a prolonged period of time.
Make sure the power is off, unit is unplugged, and the cooker has completely cooled down before cleaning, moving, or storing this product.

Troubleshooting

• PROBLEM: Cooker does not power on.
• SOLUTION: Make sure the Power Cord is plugged into an electrical outlet.
  An audible beep will be heard when the appliance is plugged in.
  The Power Button will be illuminated blue, indicating it needs to be pressed in order to turn on the unit.
• PROBLEM: Cooker will not operate (lid open).
  The unit won’t operate if the Cooker Lid is not fully closed and locked.
• SOLUTION: Make sure lid is all the way down; listen for a click to ensure lid is fully closed and locked.
• PROBLEM: Cooker will not operate (no cooking program or Steam program selected).
  The unit won’t operate if you have not selected a cooking program or Steam program.
• SOLUTION: Decide on a cooking program or Steam program, then press its button on the control panel.
• PROBLEM: Food sticks inside Cooking Pot, hard to clean.
  SOLUTION: Soak inside of pot with water for a while before cleaning.
  Water should loosen stuck food residue over time. Hot water is even more effective; and hot soapy water should be the most effective. If the residue is stuck on hard, try applying dishwashing liquid directly onto the residue and let it sit for a few minutes before soaking the area in water.
• PROBLEM: Rice is sticking together.
• SOLUTION: Stir rice within 30 minutes in Keep Warm program

Care & maintenance

Cleaning the EveryGrain™ Cooker is quick and easy. The Steaming Basket, Spatula, and Measuring Scoop are dishwasher safe or can be cleaned by rinsing in warm, soapy water. The Cooking Pot should always be cleaned by hand with warm, soapy water in order to preserve its nonstick coating.

• STEP 1: After cooking is completed, remove contents from the Cooking Pot or Steaming Basket (to store or eat).

   

• STEP 2: Dispose of any leftover food in the Cooking Pot or Steaming Basket, and rinse the pieces in warm, soapy water (or place the Steaming Basket in the dishwasher).

   

• STEP 3: Once the unit has cooled down completely, clean the inner heating plate with a clean, damp cloth.

  CAUTION: Never clean the heating plate immediately after cooking. Unplug the cooker and allow the heating plate to cool completely before cleaning.

Clean the Cooking Pot, the Steaming Basket (if used), and the heating plate after each use. Regular cleaning helps keep food residue from building up inside the pot or basket.

If food sticks inside the Cooking Pot, soak pot with water for a while before cleaning. Clean the Sealing Panel, Steam Vent, and Condensation Collector thoroughly every time you use the Cooker. Use a damp cloth or sponge and warm, soapy water to wipe the Sealing Panel and Condensation Collector clean. Remove the Steam Vent plug and rinse with warm water. Clean inside of the Steam Vent with a damp cloth.

WARNING: Do not clean the Cooking Pot, Sealing Panel, or other parts of the cooker with steel wool pads/balls.
The Cooker Base should only be cleaned by wiping it with a damp cloth.
CAUTION: Never submerge the Cooker Base in water or any other liquid.

Troubleshooting

PROBLEM
Unit does not power on.

SOLUTIONS
Make sure the Power Cord is plugged into an electrical outlet, and that outlet has power. Make sure the Work Bowl Lid is locked into place on top of the Work Bowl. The arrow on the lid and handle should line up when properly locked in place. If the lid becomes unlocked at any time while the motor is running, the unit will stop running and the blue lights around the buttons will flash.

Make sure the Work Bowl is locked into place on the Motor Base. When placing the Work Bowl on the Motor Base, turn the handle clockwise until you hear a click – indicating that the bowl is properly locked in place.

PROBLEM The Food Processor stopped in the middle of processing, and the control panel lights flashed three times.
SOLUTIONS You have exceed 10 minutes of continuous running time. Unplug the Food Processor and keep the unit off for 15 minutes before continuing use.

PROBLEM
Feed Chute is blocked.

SOLUTIONS
If you notice that a piece or cluster of food appears to be stuck in the Feed Chute, blocking food flow, turn the motor OFF. Unlock the Work Bowl Lid from the Work Bowl, and use the Food Pusher, a spatula, or spoon to remove the stuck food before reassembling. If the Work Bowl is nearly full of food, that may stop the flow of food down the Feed Chute.

If the food has reached to just below the disc attachment, you’ll need to empty the bowl before processing more food. Turn the motor OFF, wait until the blades have come to a complete stop and disassemble the unit to empty the Work Bowl.

NutriBullet® Select one-year limited warranty

LIMITED WARRANTY FOR NUTRIBULLET®
NutriBullet’s limited warranty obligations are confined to the terms set forth below:
NutriBullet, LLC (“NutriBullet”) warrants this NutriBullet® against defects in materials and workmanship for a period of one year from the date of original retail purchase. This limited warranty is valid only in the country in which the product is purchased and comes with the product at no extra charge, however shipping and processing fees will be incurred for returns, replacements and or refunds.

If a defect exists, and NutriBullet® is obligated under this limited warranty, at its option NutriBullet® will (1) repair the product at no charge, using new or refurbished replacement parts, (2) exchange the product with a product that is new or that has been manufactured from new or serviceable used parts and is at least functionally  equivalent to the original product, or (3) refund the purchase price of the product. A replacement product assumes the remaining warranty of the original product. A repaired product has a one-year warranty from the date of repair. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes NutriBullet’s property. When a refund is given, your product becomes NutriBullet’s property.

OBTAINING WARRANTY SERVICE

For limited warranty service, simply call our customer service department at 1-800-523-5993 or contact us via email from our website at nutribullet.com, simply click the contact us link, fill out and submit the customer contact form and we will be glad to help you. When you contact our customer service department you will be asked for your name, address, telephone number and to provide proof of the original purchase (receipt) containing a description of the product(s), purchase date, and the appropriate NutriBullet® serial number(s).

Before you send your product for limited warranty service please make sure to keep a copy of all relevant documents for your files (receipt, etc.). It is always recommended to purchase product insurance and tracking services when sending your product for service. Remember, shipping and processing fees will be incurred and are not covered by the one-year limited warranty.

DOWNLOAD LINK

https://nbmedia.imgix.net/NBG50100_NB_Grain-Cooker_UG_LoRes-PROOF_F210604.pdf?dl